My computer started to shut down spontaneously hibernation mode and will not come out unless I'm hot restart.
Curious... the power light flashing indicates also XP was put on Stand-By...
Here's the manual where you can read about the Stand By and flashing, how come off stand by and maybe get some ideas:
http://support.Dell.com/support/eDOCS/systems/dim9100/en/D86630LRs.PDF
We will get the video information in msinfo32 as well:
For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
Couple of things: 1) I ran anti-virus programs and found nothing. It is probably because I have Webroot essentials running on my computer that pretty much catches most of the problems. ((2) I found the clogged fan grille almost closed with dust... I have now cleaned and 3) when I try to save power settings, I get an error message that says "Power Policy Manager unable to set policy - indicates two revision levels are incompatible." I don't know if it's because I recently downloaded and installed the SP3 from Microsoft (so that I could download and install (upgrade to) Office 2010) which may be incompatible with Webroot? I say it's when I right click the icon of the Service Pack 3 and click Scan, my webroot scan lights. In any case, I've attached the information requested below.
I hope that it is something as simple to clean my gird so the machine overheating... causing the closure. My computer shuts down actually to the beautiful middle of my only uninstalling the software anti-malware you have suggested.
Name ATI Radeon X 300/X 550/X 1050 Series
ID of device PNP PCI\VEN_1002 & DEV_5B62 & SUBSYS_06021002 & REV_00\4 & 1A646D2D & 0 & 0008
Adapter Type RADEON X 600 (0x5B62), compatible ATI Technologies Inc.
Description card ATI Radeon X 300/X 550/X 1050 Series
Adapter RAM 256,00 MB (268.435.456 bytes)
Installed Drivers ati2dvag.dll
6.14.10.6925 driver version
File INF oem24.inf (section ati2mtag_RV380x)
Color plans 1
4294967296 colors Table entries
Resolution 1280 x 1024 75 Hz x
32 bits/Pixel
0xF0000000-0xF7FFFFFF memory address
0xFE9E0000-0xFE9EFFFF memory address
Port of e/s-0x0000DC00-0x0000DCFF
IRQ channel, IRQ 16
Port of e/s-0x000003B0-0x000003BB
Port of e/s-0x000003C0-0x000003DF
Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38)
Name ATI Radeon X 300/X 550/X 1050 Series Secondary
ID of device PNP PCI\VEN_1002 & DEV_5B72 & SUBSYS_06031002 & REV_00\4 & 1A646D2D & 0 & 0108
Adapter Type RADEON X 600 secondary school (0x5B72), compatible ATI Technologies Inc.
Description card ATI Radeon X 300/X 550/X 1050 Series Secondary
Adapter RAM 256,00 MB (268.435.456 bytes)
Installed Drivers ati2dvag.dll
6.14.10.6925 driver version
File INF oem24.inf (section ati2mtag_RV380x)
Color of the aircraft not available
Color not available Table entries
No available resolution
Bits/Pixel is not available
0xFE9F0000-0xFE9FFFFF memory address
Driver c:\windows\system32\drivers\ati2mtag.sys (6.14.10.6925, 3.40 MB (3 565 056 bytes), 11/02/2010 01:38)
Tags: Windows
Similar Questions
-
When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders. The task manager remains after the programs are all closed and will not go away, unless the computer is off.
It's called mode 'small footprint '. Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.
-
the computer started to shut down unexpectedly or encountered an unexpected error
I have a HP desktop would not start do not know if it is a virus or what proven system restor that wasn't tried system recovery disks and I get this message won, t start in safe mode or safe mode with command of ideas?
Hello
Make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the recovery disc
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
for any other problem with the recovery of HP software, contact HP
This isn't their recovery software, Microsoft
-
After SVC PK 1 installation, windows vista everything was ok.
After installation of SVC PK2, the computer said install, then stop and now does not start, either in safe mode, or the title of system repair.
the computer is a laptop HP dv9543cl.
I can't do anything to install, no period.
the system crashed.Hello
I suggest you to follow the steps in this link and check if it helps:
It will be useful.
-
I get the blue sreen with theses messages
0 x 0, 00000000 00000001I get the blue sreen with theses messages
0 x 0, 00000000 00000001I don't know what your problem is, but I would point out that when you say "I have no virus", you could very well be wrong
No antivirus program is perfect, and the more popular (Norton and McAfee) are among the worst. Just because they do not catch something doesn't mean you're not nfected.
In addition, more virus there are other types of malware, such as spyware, and even if you have no virus, you could be infected with spyware.
For an anti-virus program, I recommend eSet NOD32, if you're ready
to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
Avira AntiVir
Avast
Microsoft Security Essentials
You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and
install MalwareBytes AntiMalware (freeware) -
When I try to turn on the computer it gives me a message of startup repair. There are a few problem signatures read like this
The problem StartupRepairOffline event name
Hi GwenBenson,
1 have you tried running the Startup Repair tool?
2. when the problem started?
3. did you of recent changes to the computer?
4. are you able to boot in safe mode?
Method 1:
Step 1: You can check if you can boot into safe mode.
Start your computer in safe mode
Step 2:
If you can boot into safe mode without any problem, then you can try to perform a restore of the system to a restore point before you have been affected by the problem and check.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can consult the following link:
System Restore: frequently asked questions
Method 2:
Alternatively, you can try using the last known good configuration and check. It's a Windows startup option that uses the most recent system settings that worked correctly.
For more information, you can consult the following article:
Using the last good known Configuration
Hope this information is useful.
-
the computer says that my players flash is obsolete, so I tried to update. Start the download by stops at 25% and will not continue.
This morning, we solved a problem which prevented Flash Player facilities to end for some of our Macintosh users.
If you have encountered this problem, please remove any previously downloaded program installation of Flash Player and either:
(1.) download the installer from https://get.adobe.com/flashplayer
2.) download the standalone installer from http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
-
When the Active Server is shut down normally, the passive server does not start the service
Hi friends,
I have a question for the vCenter heartbeat,
When the Active Server is shut down normally, the passive server does not start the service.
Is this normal?
Thank you.
He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".
Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)
Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat
See you soon!
-
Original title: Arcsoft mouse and Lenovo ThinkPad matching
I recently bought a Lenovo X 1 carbon and it's running windows 7 pro. I tried to pair the mouse Microsoft Arcsoft Touch with this laptop and it worked.
Unfortunately every time that the computer sleeps or shuts down the mouse is more matched. The only way I've found is to reconnect is to add it again as a new device.
IT appears in my device as; Manager
(1) HID device
(2) mouse
Neither gives me the ability to disable powersaving disconnect for this device (if it appeared in my Bluetooth radio devices I would try this)
There must be a way to get the computer to recognize and default to this unit?
Hi Jeff,
Thanks for posting on Microsoft Communities!
- check the problem by plugging another Bluetooth device
I suggest you follow the steps by Althaus responded on 30 October 2012 in the following link:
Hope the helps of information. Keep us updated on the status of the issue persists. We will be happy to help you.
-
How can I transfer windows license to another PC if the first broke down and will not start?
My office with detail Win7HP broke down and will not start. I intend to buy another PC and want to use the Win7HP license on it.
If this computer came preinstalled with Windows 8.1 or Windows 10, you may not be able to install Windows 7.
If she can't, then you should be installing that it as you did on the first computer.
-
Windows 8 maintenance keeps asking to be executed, then it shuts down after 10 minutes and rehearsals require to be run again, I turnit on and it turns off after 10 minutes .This continues to repeat and it never ends, how do I fix?
Original title: maintenance of windows 8
I suggest that you run the following commands from a command prompt (Admin).
(1) sfc/scannow, when finished and restart
(2) Dism.exe / Online/Cleanup-Image /ScanHealth
(3) Dism.exe/online/Cleanup-Image /RestoreHealth Reboot and try to perform the maintenance, if the problem persists restart sfc/scannow and restart the computer.
Hope this helps and if you need any additional aid station and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum.
"When we try to take anything by itself, we find it hitched to everything else in the universe."-John Muir
If this has answered your message please mark as answer
-
When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?
Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.
-
Whenever I start my computer it will go to Dell Media Direct and will not bring me to my profile
Whenever I start my computer, it will go to Dell Media Direct and will not bring me to my profile. I will follow the direction it tells me to do, but it does not work.
These are the directions that he told me to do
- Dell Media Direct output
- Press the power button
Then when I do this
- It is said to be taken from the windows and dates back to Dell Media Direct
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
Dell's Support Forums at the link above.
Try the Dell Forums.
See you soon.
Mick Murphy - Microsoft partner
-
just turned on computer all the safety devices are disabled and will not not turn on ie... MSE DEFENDER FIREWALL
Vista Home premium 32-bit
Hello
Malware to disable your firewall and your safety programs.
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And also scan with the free version of SUPERAntiSpyware
http://www.SUPERAntiSpyware.com/download.html
SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.
SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
THS is a very good program to scan your system to remove adware, etc.:
http://www.bleepingcomputer.com/download/adwcleaner/
AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer. Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And just to be sure, nothing is lurking in the background:
'TDSSKiller Rootkit Removal Utility download for free'
http://USA.Kaspersky.com/downloads/TDSSKiller
ABon the Defender being turned OFF
With MSE installed Windows Defender is supposed to be disabled.
MSE has been designed with its own version of Windows Defender under its own program.
If the two were running, it would cause system conflicts.
See you soon.
-
Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine. Any ideas?
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It is the instance of Vista installation.
http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads
Adjust settings, manage user accounts.
Try the Forum above to repost, if necessary.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Some time when I use certain software applications, the images on my Portege R100 distorted. Why does this happen?
-
I have the habit of keeping three firefox windows open at the same time and I've always defined (under the general tab) ' display windows and tabs from last time '. It has stopped working. The setting is the same, but when I close and then reopen fir
-
How to reset the settings of microphone on Skype for ios7? No audio output.
-
How to convert an analog signal into digital signal
Hello How to convert an analog signal into digital signal, such that each sample of the analogue signal corresponding to 1.2V will be represented as '1' digital signal and other samples of the analog signal (which are not 1.2V) will be represented (c
-
Wipe the hard drive and reload Windows Vista
I want to wipe my hard drive and then reload Windows vista business 32-bit my original cd/dvd, what is the best way to do it and what does it save before I commit to such an action. I had a series of problems with my computer and the last correction