my computer turns off not and the hibernation...
my computer turns off not and the hibernation...
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
The above is kind of prerequisites and may solve the problem.
==========================================
A Fixit for Hibernate
How can I enable hibernation on my Windows Vista computer?
http://support.Microsoft.com/default.aspx/KB/929658
How to reactivate the lack of Hibernate Option in Windows Vista?
http://www.askvg.com/how-to-re-enable-missing-Hibernate-option-in-Windows-Vista/
-------------------------------------------
More if necessary:
Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem
and so on.
Troubleshooting Windows Vista sleep and extended
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm
How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686
May need to reset all to default power settings and then place back as you prefer.
How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
Panel configuration-Device Manager - look at the settings for the WiFi network card power management,
Modem and other devices. (Double click on the device and the power management tab)
May need to reset all to default power settings and then place back as you prefer.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Original title: lost documents
My computer turns off to configure the updates while I was working on a document. I didn't save it. Can I get it back? or it is lost forever?
If it has not been registered, he went. Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA -
Computer turns off slowly and at the start of the Advanced Boot Options Menu
original title: my computer takes forvever close my f1 comes and goes in safe mode to start windows normally
my computer takes long time to close and clogging keeps my dead fire wall, I am currently on Charter communications virius technical, also my f1 and f2 continue to flow upwards when my restatrs computer and it goes to safe mode to launch normannly
Hello
Don't forget to remove all the old programs using the removal of the machine tools and/or their extraordinary
instructions.List of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Computer doesn't turn off not from the Start button on the desktop?
office up I push the Start button, and then select shut down, and then select farm in the menu drop down and he goes as far as "shutting down" display on the desktop, but will not proceed from there and stop. Everything continues to display "shutting down". -Help. ! Thank you.!
Hello
All changes made to the computer before the show?Try the steps and check.Method 1:Step 1:
Start the computer in safe mode and check if the problem occurs. Check out the link and follow the steps.Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-modeStep 2:
If the computer works fine in the safe mode, being in Safe Mode, perform a clean boot, and then restart the computer and check. Visit the link and follow the steps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Method 2:Check out the link and follow the steps.Solve power problems -
I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?
Thank you.
Hello
Try to push the power cord firmly upward. It should not move when it is completely inserted.
Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.
-
My HP Pavilion keeps stopping itself when I pt standby. When I come back he said it was a blue error screen.
Here's the info dump;
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800775E060
BCP3: FFFFF80000B9A3D8
BCP4: FFFFFA800DA90C60
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\101315-20779-01.dmp
C:\Users\CHI\AppData\Local\Temp\WER-94131-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
Any help would be appreciated. Do I need a BIOS update? My motherboard is dying?
Thank you.
Hello
Please start Windows.
Make a right-click on the icon my computer.
Go to the properties
Click on Advanced system Settings
Click - system and recovery - advanced settings - uncheck/disable auto restart option tab
Apply the changes and exit
Enter the exact stop for the blue screen error code.
Also update the graphics and the BIOS of hp website drivers.
-
Someone help me please!
Click Start > type in the search box > display the event log > click on the result and to identify any error and criticism during the time that you are having crashes on your machine.
If you can post back with events, we can narrow down the cause of the problem.
Also could you identify which version of Windows and Web browser that you use in this case?
Is your web site updated the browser extensions?
Is your video card drivers updated?
-
MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.
The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.
If your drive CAN be mounted, start-up continues normally.
If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.
If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.
I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.
-
Computer turns Off at the start and can not reinstall windows
Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.
Please HELP, it's so sad. I will not buy another Windows computer.
~ Paul Côté
For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.
This isn't their recovery process, Microsoft
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To reinstall from a Microsoft Vista DVD:
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To install Ubuntu:
See you soon.
Mick Murphy - Microsoft partner
-
If I have not used the computer for a few minutes then the screen of the computer turns off. The computer is not sleep. I tried to use the space bar to wake him but he won't answer. I have to turn off the computer. Then turn on the computer. This has happened for 2 months. I have a Dell DM051, 446 GB HDD with 329 free GB, 2 GB RAM, Intel (r) Pentium (r) CPU 2.80 GHz, ASUS A7 Series 240 and Windows 8 Pro graphics. I replaced the graphics card because I thought that this could be the problem, but it wasn't. I need to replace to fix this? Thanks for your help.
You have disabled things like Hibernate and hybrid sleep, etc. on the power options screen in Windows?
Have you checked the USB settings in the Device Manager? Search tab power management for each listed root USB hub and uncheck the box "allow the computer to turn off this device...". »
And do the same for entries under Human Interface Devices (HID) device as Manager.
Then restart...
-
My computer turns off during an update to windows xp and now windows xp will not load.
My computer turns off during an update to windows xp and now windows xp will not load. It gives me the option of last known good configuration and safe mode startup and normal startup, but it just goes back to the loading screen then flashes a blue error screen then back to display boot options. I don't have a recovery disc as the laptop does not have a CD-ROM drive or a floppy drive. I have the product key, but I don't know where or how repair the operating system.
Contact the manufacturer of your laptop as there must be a way to restore the computer. There may be a hidden restore partition.
-
How and when the computer turns off automatically?
Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.
This is great... .buth how and when the computer turns off? When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?
Hello allan299,
Thank you for using communities of Apple Support.
According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.
You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.
Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:
OS X Yosemite: energy saver Preferences
OS X Yosemite: set sleep and wake up on time for your Mac
OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep
Best regards.
-
My Outbox is suspended (swirling circle) with a large attachment... It's been 4 days now and beneficiaries become the subject of the email, but no attachment every few hours. I tried airplane mode turn off etc. and not good. It seems that I can not stop the email to send so that I can access and delete it. Help!
delete the account and set it up again
-
Hibernation problems - my computer turns off but it restarts immediately.
I am running Windows Vista Home basic with Service Pack 2.
Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?
I am running Windows Vista Home basic with Service Pack 2.
Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?
Microsoft recommended a different command:
http://support.Microsoft.com/kb/928897
I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable
Click Start > programs > Accessories > right click on command prompt > run as Admin >powercfg-h on
Alternatively, try the Fix - It.See you soon.Mick Murphy - Microsoft partner
-
does not and the freezing of the computer...
My computer keeps freezing. It will be the circle of hour glass thing and is the only way I can get the computer to turn off by holding the power button down. It will freeze and the computer screen turns white and everything's going to say (not answer). What should I do?
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Performance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Maybe you are looking for
-
Function key F2 &; F3 do not work!
I'm here to ask for a help. F2 & F3 keys do not work on my laptop... Help me please?
-
Adapter Optitek Mark II with F55
We have the original card Optitek and now Mark II. The mark II with the F55 does not need to be able to run to him. In other words, it can't connect the cable 4 pin to 12 volt. For users of F5, it's a new high since the F5 has 4 terminals of power to
-
Save image as .jpg Labview
Hello I would like to know how can I open a picture in Labview and save it in ".jpg". because I know how to import an image in labview and I know how I can save this image, but when I save the image, it shows that it is "example.jpg", but she's not "
-
EA6500 router password stop working when on the Internet
My question is quite simple but really difficult to understand on a logical point of view. I have a new EA6500 (v1), I hung on the network and set it up using the router password by default is 'admin '. I have configured the PPPOE connection to my in
-
HP pavilion ze4200 memory upgrade
will be pc2700 1 GB of ram instead of 2 x 512 MB work on pavilion ze4200 computer laptop