My computer turns off when I try to burn a DVD with Windows DVD Maker__

Similar Questions

• When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You try to burn a video DVD? If_yes_that is not supported
  by Windows Media Player, try using Windows DVD Maker.

  The following items may be worth a visit:

  Burn a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

  Burn a CD or DVD in Windows Media Player:
  Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite L500-19 X - code error when you try to burn on DVD

  Error code: 380381-26 - 2A 037303 when you try to burn to DVD.

  Can anyone help?

  Hello

  What program you use for burning discs?
  What operating system is installed?
  What kind of blank DVDs you are using?

  To be honest, I can t say something about it and description of a sentence is too short in this case.

  I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.

• When I try to copy a cd with windows vista, it says that I don't have a cd player?

  When I try to copy a cd with windows vista, it says that I don't have a cd player? I ripped several cds in the past. I found an error code: ATAPI DVD A DH-16A6L

  ANY IDEAS? I'm at my wits end!

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Power problems: computer turns off when the power supply cord is unplugged.

  original title: power problems: computer shit turned off when the power supply cord is unplugged.

  I have a HP Pavilion dv2000

  Windows vista home premium/sp2

  AMD Turion (TM) 64/2 1.80 ghz processor

  1 GB memory

  32 bit operating system

  I have 2 problems with this laptop.

  !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

  When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

  now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

  the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

  Any help will be greatly appreciated.

  Hi aloum,.

  (a) what kind of mouse you are using?

  (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

  Step 1: Test the mouse on another computer or another mouse on the test computer

  To determine whether the mouse or the computer is defective, follow these steps:

  1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

  2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

  In regard to the battery not holding charge

  Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

  Troubleshooting battery problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

  I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

  Hello

  Are you aware of any changes made to the computer, before the show?

  I suggest to change the power management and check for the issue.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  If the above does not help, I suggest you to contact Acer support for assistance.

  http://support.Acer.com/us/en/default.aspx

  I hope this helps.

• Why does when I try to burn a dvd and a series of invalied reported

  Hey it help out me. When I wannt to burn a dvd, I thought invalied chain. I can understand what it is and what to do. Thanks for your contributions

  Hi Wally,

  Thanks for posting this question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. How do you try to burn the DVD?

  2. you use Windows Media Player or Windows DVD Maker to burn the DVD?

  3. do you have a security program installed in the computer?

  4. are you aware of any changes made to the computer before the show?

  You can go through the steps in the article and check if it helps.

  If you use Windows Media Player to burn the DVD, go through this article and check. If you use Windows DVD Maker, and then go through this article and check if it helps.

  Hope this helps and provide us more information if you need more assistance. We will be happy to help.

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• 'Cannot find module' when you try to burn a slideshow with the included MP3 files

  original title: Hello I receive an error message when you try to burn a slide show. The error occurs only after I have add mp3 music to the slideshow. The error message is "cannot find module '.

  Windows 7

  Windows DVD maker
  Overview of the slideshow works until the music is added
  Mp3 music files

  Hi SteveC_999,

  1. are you able to add different file format music files slide show Windows DVD Maker?

  2 did you change on your computer before this problem?

  You can use your favorite search engine & download any third-party file converter to convert the MP3 file format to a file format that is supported by Windows DVD Maker.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Time Capsule turn off when you try to access

  1. I have a TC (A1409) with a WD Caviar 2 TB (replacing the HARD drive)
  2. Now, it stops when you try to access the HARD drive on my mac. I mean, it's on, green light, all ok and then I try to look for something on the HDD and it turned off.
  3. It does not work this way, at the beginning he worked just perfect!

  Any ideas?

  Thank you!

  FWIW, the 4th generation of Capsules of time had problems with their power supplies, specifically because of an overheating. This may not be directly related to your question; However, you use a replacement drive that may be overloading power of the TC.

  Given that the problem only occurs when access them the disk, which will rotate upward and consume more energy, may be the reason why you have this problem.

• Satellite A30, portable computer turns off when you play pc

  Hello
  I have a laptop satellite a30. I have only recently problem with it when I want to play pc games. I don't have any other programs running and the computer just to cancel, is dead, his car turns off. I can't seem to find that something wrong with pc games and it must be running on the pc. can anyone help please? suggestions for wat I can do?

  Lee.

  Hello
  First of all, did you updated on the machine, if if, which updates? patched the game (updated)? do you have any kind of error messages (eventlog)
  concerning

  Gandalfwhite

• Satellite A210 - 128 (PSAELE) turns off when you try to boot from the CD/DVD

  Hi all. I have a (serious) problem.

  I bought my Toshiba two years ago (it was brand new) with Windows Vista already installed (vista and boot partition). Now I'm trying to boot and install Windows 7 Ultimate, but after I select boot from CD/DVD and start the copy of the system files, my Toshiba * turns *, completely. Overheating is not the problem for sure.

  Anyone with a similar experience or everything to know about how to solve my problem? :(((

  Thnx,

  Stipe

  Hello

  Why you are sure that your computer laptop isn't overheating? In my view turn is the typical pattern of overheating and you must clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  You have this problem when you try to install Windows 7 or make this happen with the Toshiba recovery disc too?

  Maybe during the process of copying the files will be written on a bad sector on the HARD drive and so he shuts himself who knows?

• whenever I try to burn a cd with windows media player, a blue screen appears and restart my computer, what should I do?

  whenever I try to burn a cd, my computer goes to a blue screen and restarting my computer, what should I do?

  Hello

  Most likely, there is a problem with the CD/DVD drive. You can burn a data disc when
  don't use not WMP? Close all programs, put in a flammable disk and use the data method.
  If burning a data disc works then you have any add-ons for WMP12?

  -----------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Code 10 error when you try to burn cd/dvd

  error __code 10

  running windows 7 Home premium... gettig code 10 when trying to burn cd/dvd...can't can't find the part upper or lower filters... do I do...

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I try to burn a DVD with Windows DVD Maker, he says that the file is not a valid project create DVD file. Why?

  When I try to click on add items in Windows DVD Maker, it will allow me to select a file, then it tells me that the file is not a valid project create DVD file. Why?

  What is the format (extension) of the files of the selection?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker