My computer will not connect to the internet. I have wireless explore 6. System displays all NICs with a yellow warning sign. Icons at the bottom of the page are all gone along the bars indicating connection strength.

Similar Questions

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• Vista - computer will not start without the disc

  loaded vista on my computer - now computer will not start without the disc

  Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system.  Hope this helps someone else with the same prob.

• Application that created on another computer will not connect usb-camera

  Hello, friends!

  I have a problem:

  My application that was created on my computer does not connect usb-camera on the other computer. I installed the LabView run-time engine and the runtime of vision on this computer but it is not useful :-(application is open, but the usb device not running.

  I'll be thanked for any help with this problem!

  Thank you very much!

  It's the solution to the problem:

  Solution:
  To run an exe containing NEITHER-IMAQ for USB functions, follow these steps on the computer that is running the EXE file:

  1. Install the following execution engines:
     • LabVIEW Run - time Engine (same version that was used to develop the VI)
     • Execution of vision engine (same version that was used to develop the VI)
       • One Vision single-seater deployment license is required for each computer target on which you install the runtime of the Vision. See all the related links for more details.
  2. Copy the following dll files to the directory on your development computer system, usually C:\Windows\system32 directory of your target machine system.
     • ImaqDirectShowDll.dll
     • ImaqDirectShowExport.dll
  3. Register at ImaqDirectShowExport.dll by the Windows Start Menu , click run. Type regsvr32 C:\WINDOWS\system32\ImaqDirectShowExport.dll, and then click OK to register the DLL.

     If you are on a different operating system or if the system folder is different and that you want to copy the path instead of typing all the way, you can drag the file to the command line at the prompt to run it, highlight the path, right-click and select it copy.  Paste in the command prompt by right-clicking and selecting window block.

     The ImaqDirectShowDll doesn't have to be registered.

  Once these steps are completed, and the DLL is registered successfully, your EXE will work.  Vision Acquisition software or Vision Development Module must be installed on the target computer.

• Error code: code 80072EE2, computer will not update, since the last big update.

  Original title: 80072EE2

  computer will not update. also wdi prob host service. a lot of prob since the last big update. need help

  Hi Denny,

  We may refer to the article and check if it helps to solve the problem.

  Windows Update error 80072ee2

  Otherwise, you can read the article and try the steps to solve the problem.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

• my computer will not connect to wireless internet

  I got a bad virus on my computer and I had somone who knew what they were doing to clear my computer.  Once they wiped it they put all the disks provided with the computer back on, but I can't conect to wireless internet. When I go to connect to a network, it is not see the same there is wirless avalible. I know the router is working because my phone can pick up the signal. I don't know what to do?

  Hello

  Turn off the router (unplug power cord), wait a few minutes and then turn it back on.
  Restart and try to sign in.

  1 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  2. your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
  I would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can use a wired connection
  If possible or download drivers on another computer and transfer them via removabler
  media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE like
  they are almost always old, and you can search for drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - define the network locations
  page - down left click on merge or delete network locations - REMOVE all instances of your network
  (and all the others you no longer use)-RESTART. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• computer will not connect to a computer via bluetooth nother

  I am trying to connect two computers using bluetooth for file transfer, but I get error 0 x 80070057 trying to pair.
  usb bluetooth adapters are about 1 foot away.
  two computers running windows 7 home 64-bit
  Help me please

  Hi Jacob,

  1 do you have Bluetooth devices internal or external connected to the laptop?
  2. have you checked if all the Bluetooth drivers on two laptops are very well installed?
  3. this working fine before? If Yes, are you aware of changes to the computer before the show?
  4. is this a problem only when connecting these 2 computers?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can run the Fixit and see if it helps.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems
   
  Method 2:
  
  I would also say to browse these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: It also applies to Windows 7

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-in/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Hope this information helps. Response with status so that we can help you.

• Windows 7 for Lenovo G50-70 - the computer will not boot from the CD

  Hello world

  I hope that someone here will be able to help

  I bought a new laptop with Windows 8.1. I want to install Windows 7 on that I know well because I can't use the new windows. I changed the settings in the BIOS to get the machine to boot from the CD, but it won't be fair. I also tried to restore the system to boot from the CD, but it installs just the Windows pre-installed, new instead. Also, I can't access the CD from the drive while all my other computers are capable of (what is strange)

  Can someone help, please?

  See you soon

  PS. : I can turn on the computer through the small "boot botton" on the side and select the DVD drive to boot from. But this is not followed by the message "Press any key to boot from CD" and the computer starts just W8 yet;

  I contacted customer service and followed your advice. They refused to help him on the ground that there nothing wrong with the machine in their opinion, and since I wanted to change operating system. All preinstalled spyprogrammes Lenovo has been erased with this downgrade. So far, I've owned a laptop computer brand new and expensive for a year I used only to waste my time, trying to make it work, that was not why I bought it in the first place. What a RIP-OFF!

• computer will not start up - the application or the C:\WINDOWS\system32\DNSAPI.dll DLL is not a valid Windows image

  When I try to start my computer, I get this message... [the application or the 32DNSAP.dll DLLC:windows\system is not a valid image. [Please check this against your installation diskette.]  However, after inserting disc and reboot, I get the same message, and the computer starts. Any suggestions? Please and thank you

  Well, I know what this means and have recreated on my system (that's how I got the exact message).

  Now we will see this as the system engineers of Microsoft came up with a workable solution that does not involve the possession of a genuine bootable XP installation CD (sorry - there is no Microsoft KB article for this message).

  MS has a free support that might be useful:

  http://support.Microsoft.com/kb/2509553

• Computer will not start after the installation of Kaspersky, will not even go into safe mode

  I tried to install Kaspersky on my laptop this morning to roll some viruses on my computer. After you restart during the installation, I got the blue screen of death with a STOP 0x000000F4 error code. I can't use my phone at all now, and it will not work in SafeMode either. I tried to restore the computer to before that Kaspersky was installed but it cannot do so. I tried to restore to the last known good configuration, but that did not work. I have no idea what to do now. My laptop is basically useless now and I am very angry.

  If I have the Kaspersky disk in I kind of access Kaspersky, and it keeps telling me it is obsolete and must be updated, but it will not be updated. Also, it tries to mount the drives or something and gets stuck trying to create the swap file. I don't know if it's important, but I'll post it anyway.
  I'm at a loss to know what to do...

  If you have tried to install an AV program after your PC has been infected you left it too late.

  Your safest option is to use your recovery discs to get destructive if you plant (make sure that the external devices are disconnected during this process)

  I hope that you, the data has been saved you will lose everything on the PC

  Once recovered allow windows update to do its thing for Important updates ONLY. It may take several reboots.

  If any update fails cure this problem before doing anything else.

  Once the update finished visit of manufacturers of laptop for important driver updates to update necessary.

  Only after this has been done, you should start installing software or external devices.

  If an installation fails, solve this problem before

• CD burned from the computer will not playback in the car

  original title: burning music

  After burning to a CD, they will play back computer and DAB radio/CD, but not more hardware and cars.

  Is this because the CD player is reading in MP3 format? What should I do to the car

  Thank you

  Older models can't read CD - R or CD - RW. You will need to check the documentation that came with them to verify this.

  If a new unit is supposed to play a CD burned, but he can't, so its usually because the CD no was NOT finalized (i.e. burned as a multisession - you just need to finalize it) or burned at very high speed. (You should always burn at the advertised speed of at least your burning half: IE if it can manage 48 x then burn at 24 x max personally I always burn at 12 x, slow but you get a good picture on the CD).

  On the other hand, if you burned as a data (mp3) disc then the most modern of the stereo and car players are capable of reading this format, but more its not. Again, check the docs. According to the music CD from above, if your player is mp3 capable, but can not read the CD, make sure that the CD has said has been finalized or burned at low speed.

  About your car, once again reading the manual. If it can read mp3, then burn them on a CD in the form of data (no music), low speed andf make sure finalize you the CD.

  The best piece of software and flexible to use in my humble OPINION, is CDBurnerXP (Google it). as against WMP (which is very basic). It also asks you before burning if you want to finalize the CD or make a "multisession."

  See you soon,.

  Jerry

• computer will not start at the top. Did just a bit of noise and a bright flash, but nothing else works, not even the monitor

  No Visual on the screen.  The computer does not (noise) to turn on.

  All I can do is repeat my previous tips for you:

  If nothing appears at all, it seems to be a hardware problem.

  If under warranty, contact the manufacturer of your computer.

  If it is not under warranty, contact a local and trusted computer repair shop.

  Good luck with it.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• Computer will not download from the internet

  I saw on this site that other people have similar problems with Vista suddenly refusing to download anything on the internet, even if they use a different browser.  Personally, I use Firefox and the same problem occurs even if I use IE.  I tried all the methods disabiling my Add-ons, restarted my laptop, etc.  No one answered that these methods have worked.  I don't see if it is malware on my laptop because I can not download the removal tool.  I was able to download Vista SP2 and other updates, but that was it.  Nothing else does.  Is there another way to solve this thorny problem?  This issue started back around April of this year after an update for an Ipod.

  Try the above and if no help do the following:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If no joy:

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Try runnng Chkdsk of Recovery Options
  (it of a more efficient way to manage to restart the computer and might work)
  Rob - bicycle - Mark Twain said it is good.

• My computer will not connect administrator account

  When I get to the home screen, and I try to put my password to open a session in my account (which is also my administrator account) .He told me that user logon Service failed to connect.

  I can connect in all other standard users without problem, but when I try to use the administrator command prompt, I get a message requesting my password--and it does not use the command prompt.

  I also tried to do this in safe mode, but it simply doesn't. What should I do?

  You can try in 2 ways. .....
  Assuming that your full is the error message:
  The user profile service has not logon. User profile cannot be loaded

  1 use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  2. do a system restore. Choose a date where you did NOT have this problem as your restore point:
  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  t-4-2