My computer will not start normally upward. Audio does not work.

Similar Questions

• the keyboard of my dell computer will not work

  the keyboard of my dell computer will not work

  Reference Dell _ (model)?

  Tried other keyboards?

  How to get into BIOS but not once the operating system has started?

• Update just to install a version of that my computer will not work.

  I could not to update to the latest version of Firefox for several months that I'm still on OS 10.4, however at least previous update messages were smart enough to not make me download something that I could not run. Today, however, updated and then could not even open Firefox, indicating he could not run on my version of software. Now I have to try to find an old version of firefox, but I'm completely lost - I use an older version, think I had saved on my computer at the moment, but it is outdated compared to what I was using before your "update" undid all my previous updates that had updated me as I could be on my system , and now my modules will not race or anything like that. Now, I have to lose today try to undo what did your update. Any help would be appreciated, but update pricing as people know in advance what updated would be would be a better thing to do. My most important question - CAN any WHO TELL ME this HIGHEST UPDATED VERSION OF FIREFOX IS THAT I CAN'T INSTALL / USE WHILE RUNNING OSX 10.4.11, thank YOU.

  Firefox 3.6.28 is the highest which will run on 10.4 on PowerPC or Intel. The update to know that... http://www.Mozilla.org/en-us/Firefox/all-older

  Because Fx3.6 receives no security updates, you should probably consider an OS upgrade or a browser change at some point.

• Photosmart Plus B210a ink level by computer will not work

  I have Photosmart Plus B210a. Running Windows 7.  The function to determine the level of ink by computer suddenly won't work.  The option will not even appear in the devices & printers screen.   I install only the HP cartridges.

  It is possible, it was lost if you did an update of the Hp software. To get the option on your computer, you can download the latest drivers. Don't forget to uninstall and re install with updated drivers. When pilots selection select features complete drivers.

  Updated drivers

• My built-in webcam on my HP Pavilion TouchSmart desktop computer will not work on all programs, online or offline and will not display on my computer.

  My built-in webcam on my HP Pavilion TouchSmart desktop PC, product #: FK935AA-ABG, model #: IQ515a, does not work, that is to say, it does not appear on my computer as a work/usable/functional/real webcam. The green light next to the real webcam above the screen doesn't flash or turn on (there is no light indicating that it is not on). I don't know how to activate it or make it work. On Windows Live Messenger, the name of my webcam does not appear on the drop-down list, and I want to know why it does not appear only on MSN but Skype, HP TouchSmart, YouCam and other online and offline programs.

  Have you tried HP support?
  http://h20000.www2.HP.com/bizsupport/TechSupport/ContactHP.jsp?lang=en&cc=us&docIndexId=61598&TaskID=115&prodTypeId=12454&prodSeriesId=3733137
  b Eddie

• Uninstalled the USB root HUB and now computer will not work

  Hello

  Just got a new computer and I'm afraid I might have broke it...

  My computer is a HP Envy 23-c100xt with Windows 8.

  I tried to use one of the ports 3.0 and 2.0 and it wouldn't read my USB, but I tried on another computer so I know this isn't the USB. So I followed some web tips online here and did this:

  Click on start and type device in the search for field, and then select Device Manager uninstall USB root hub

  Restarted my computer and the screen refreshes itself automatically every 4 seconds. Cannot open any program or even go to Manager tasks.

  Help, please!

  Thank you!!!

  Jess

  Are you sure you don't have anything else? It is difficult to see how to uninstall a device could lead to consequences also as usually convince windows NOT to reinstall the drivers and devices, it is what causes the trouble, not the other way around.

  Uninstalling devices does not lead to what you describe.

• My password reset the flash drive to my other computer will not work

  I don't remember my password for windows vista. I created a password reset using my flash drive on my other computer, but each tooth I want to reset the password on my laptop it says that an error has occurred. How to get to work.so O can use my laptop.

  Reset the password you created on the other computer is * FOR * the other computer.  They are not interchangeable. ;-)

• Computer will not work after you download service pack 2 for Windows Xp

  Whenever I have download Xp SP2, my computer keeps restarting over and over again. What should I do to fix this?

  Take a look on: http://winhlp.com/node/125#Boot_or_shutdown_problems_after_Service_Pack_2_installation

  Are you aware that SP3 is available?
  TaurArian [MVP] 2005-2010 - Update Services

• Computer will not work

  My HP pavilion tried to update and then failed, and after several times trying to restore it, it is now said auto repair on the screen and goes to a black screen. It does not at all and I do not know if it had a warranty since I bought to someone I don't know.

  Hello

  See if this helps you with your repair options.

  "How to access the Windows Advanced Startup Options 8 or 8.1"

  http://pcsupport.about.com/od/Windows-8/a/open-Advanced-startup-options-Windows-8.htm

  "How Boot for advanced Windows 8 Boot Options and 8.1" . "

  http://www.eightforums.com/tutorials/4935-startup-options-menu-boot-Windows-8-a.html

  There are also detailed here.

  http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html

  

  ______________________________________________

  And please read this method:

  "How Boot for"System Recovery Options"in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.html

  

  @@@@@@@@@@@@@@@@@@@@@@@@

  If you want to reinstall:

  Follow these steps for HP to do a restore to factory settings (new State).

  http://support.HP.com/GB-en/document/c03489643

  Scroll to the bottom of the link for more information about resetting outside of Windows.

  ___________________________________________________

  "PC HP - creating a recovery Image on disc or save a recovery Image on a USB drive (Windows 8).

  http://support.HP.com/au-en/document/c03481733#AbT1

  See you soon.

• Computer will not start normally - boots to the BIOS boot screen

  Hi, today I had problems on my computer and it will not start normally upward. This started happening today. When I turn on the monitor, the HP logo appears on a blue screen (as usual), but then, there are a lot of vertical white lines grouped perfectly on the screen (it's never happened before) he started to arrive yesterday. and when I try to start it, there is just a black screen for a long time and sometimes the system recov appears but it takes SO long to finish so I just stopped and went into safe mode and did a quick scans with Malwarebytes, MS Security Essentials and SUPERAntiSpyware, but they are all come clean except SUPER which came with a few things from tracking cookies...

  Today, I have scanned a full scan with malwarebytes and it says that there is no infection.

  can someone help me? I'm at the library atm! Thank you!

  Picture of the blue screen with lines here: http://img638.imageshack.us/img638/8583/post1278441253416372.jpg

  also - im wondering how to start with recov disks? I have two drives but only as on slot dvd thing and I know to start upward with her? should I boot with it because the layout is a little down? and I don't have an installation disc windows vista then Yes.

  Thank you very much!

  Hello Winston,

  According to the image that you posted, it seems that the blue screen is a blue screen with the HP logo on the subject.

  If this is the case, then the machine has not yet reached Windows and is suspended in the machine Power On Self Test.

  My recommendation for this scenario is to contact HP about what there is something at the level of the material / process/firmware BIOS which prevents the machine to get it to start Windows Vista.

  Let us know what they have to say.

  Best regards

  Matthew_Ha

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• computer will not start the service, access denied

  I installed this windows service: http://code.msdn.microsoft.com/windowsdesktop/CppWindowsService-cacf4948

  and when I try to start the service in the GCS I get the error 5 error message: access denied
  my account is set to admin and I even tried to use the default admin user, but still it will not work

  Hello

  From the description above, you get the error code 5 access denied cannot start the service.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Post us the results once you try the steps above.

• When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  When starting my computer will not have right to windows is said by pressing F1 or F2, he also says to look for floppy drive 0 failure

  It is a message from the BIOS. You can press F2 and go into BIOS and select "set as default" then save and exit. The PC actually has a floppy drive?

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.