My computer will not wake from "sleep".

Similar Questions

• my computer would not wake from sleep when the cover iclose & open again?

  When I close the lid on my computer & open it again, the computer does not wake up, it shows just a black screen!

  Hi George,.

  From the description of the problem, it seems that the computer would not wake from sleep when you close the lid and open it again. I understand the inconvenience.

  Let us, try to perform the following methods and check if it helps.

  Method 1: Run the troubleshooter of power

  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 2: Troubleshoot wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  Method 3: Update Chipset drivers

  Download and install the latest version of drivers for chipset for the computer on the computer manufacturer site and check if you are faced with the same question.

  Method 4: Run the BIOS update

  I would say as you perform the update of the BIOS by contacting the manufacturer of the computer, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you

• Vista will not wake from sleep mode

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  I have Vista SP2, Intel Quad Core processor, 4 GB RAM, 64-bit. I have never been able to use "sleep" mode and am forced to restart the computer. Checked and unchecked parameters in Manager devices, power management, etc. Have not found a solution through the web, Tech Web sites or Microsoft Web sites. What I found is that it is an unsolved problem with Vista and all over the web with other users having the same problem. Hope I'm wrong. Help, please.

  Have you tried...
  Start button > Control Panel > Classic view > Power Options > go to Plan you selected, click on change plan settings > click on change advanced power settings > on this new window, use the cursor, scroll down to multimedia settings, then click on the + sign in front of him. Click on the + sign in front when sharing media > change BOTH the "on battery" and "Plug-in" allow the computer to sleep. > click OK

  Now see if the computer will go to sleep mode.

  t-4-2

• Computer does not wake from sleep sometimes

  When my computer goes to sleep sometimes it won't wake up.  It seems to happen when not used for long periods-2 or 3 hours.  In power settings, I sleep at 5: 00.  The screen turns off, but computer would stay as wanted.  When he did this time the screen would not come back.  Usually to move the mouse could get things.  I tried to hit the buttons on the mouse and the keyboard, nothing.  I had not turned monitor works, reads "no signal".

  All the ideas!

  Thank you

  Sleep store the Windows operating system into RAM memory and depends in part on the power to keep what in memory to be corrupted.

  If disabling sleep slows down your problem, then try

  Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• L50D-B satellite will not wake from sleep mode

  My satellite L50D-B - 16 Q won't get out of the way 'sleep'.
  When I turn on the power button so the NUMLOCK and CAPS LOCK light

  Hello

  How about this solution:

  • Disconnect the power adapter
  • Remove the main battery
  • Power button press and hold 30-40 long s
  • Reinsert the battery
  • Plug the power adapter
  • Press the power button

  Note: Repeat this procedure 4 or 5 times in the line and check if you could power the unit after each step

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• Dell coming Pro 8 do not wake from sleep

  Hello Dell and everybody, my DV8Pro not waking from sleep. I had to press the power button for 10 seconds to start up again. Someone at - he found a solution to this? Reference dell is listening to its customers? Thank you.

  Try ' Qualcomn Atheros AR6004 WLAN adapt. "

  In addition, be careful not to disable "Wake on Magic Packet" and "Wake on pattern match.

  1. click on set to update driver

  2. click Browse my computer for driver software

  3. click on Let me pick from a list of device on my computer drivers

  4 uncheck Show compatible hardware

  5. choose Qualcom Atheros AR6004 WIRELESS network adapter
  

• Switches to color when you restart the computer profile or wakes from sleep

  I bought a Dell Inspiron 1470 with Windows 7 at home as a backup of my MacBook Pro.  I used the Spyder2Express to calibrate my screen that works well.  After that I restarted my PC the color profile has been enabled for a few short seconds, but then returned to the default setting, which is horribly blue and too bright.

  I then removed the color profile created by my Spyder2Express and used Windows' built in the calibration of the monitor.  Yet once, it worked until I rebooted the computer, or he woke from sleep mode.

  I then wen to the control panel-->--> the color management advanced and assured the new profile is the default value of the system.  The problem still remained after the computer is restarted.

  The only solution I have found so far is if after I restarted my pc I go to Panel of--> of color management and select and clear the checkbox "use my settings for this device."  My profile will then return until I restart the next time.

  As a pro photographer, it is a question that is extremely disappointing.  I searched forums, web, called Dell directly and none of this was of no help.  Any thoughts?

  Hi Mike,.

  It seems that software Spyder2Express adds color profile after each reboot. We can check if really Spyder2Express is the origin of the problem
  
  Method 1:
  Uninstall Spyder 2 express and check if the return of the issue after each reboot.
  
  Method 2:
  Configure the computer to boot and then refine the boot entry that is causing the problem
  
  Step 1: Perform a clean boot:
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  d. under the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  e. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.
  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  f. click OK and then click on restart.

  Step 2: Enable half the services
  
  a. click on the Services tab and then click to select the skin all the Microsoft services checkbox.
  b. Click to select half of the check boxes in the Service list.
  c. click OK and then click on restart.
   
  Solve the problem:
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual:
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click on restart.

  All the steps above to perform the clean boot is mentioned in the following article
  http://support.Microsoft.com/kb/929135

  Hope this helps,
  A Mir.

• Reference windows xp Dell does not wake from sleep mode

  I am running XP service pack 3. When I try to wake up computer sleep mode orange light flashes but will not start. I hard reboot - sometimes the work - sometimes not. Sometimes he began alone. It is an intermittent problem.

  Hello

  Try the procedure described in the following article and check the status of the issue.

  Solve problems to wake the computer from sleep mode.

  http://support.Microsoft.com/kb/266283

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!

• X 1 yoga (and Yoga 260) does not wake from sleep

  Hello

  We got 2 x try and buy Lenovo Tablet portable Yoga (a X 1 Yoga and a Yoga 260) to assess their skills for our company, because we have the intention to upgrade many of our employees laptops. However, since we got the devices we noticed on two common problems with display and waking from sleep. Very often laptops awake properly with the screen remains black. In these cases, the backlight of the display seems to turn on, and I guess the system works somehow in the background. Put the computer to sleep again (for example, by closing the lid) makes the computer wake up correctly at the second attempt.

  Different error in the same category is when a video is running and the laptop is connected to AC - plug the AC cord is black screen while playing the media kept its content.

  All drivers have been updated to the latest version via 5.07.0029 Lenovo system update.

  Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new (!) presentation. Apparently, it seems like a driver/software problem?

  Best regards

  After finishing with a touch screen not responding not (as far as I can tell a result of v4.19 Touch Firmware Update) on top of the issue of the sleep-wake I'm frustrated and went through the process of reinstalling the entire system.

  I used the reset at startup procedure to put the system back to factory settings. After factory reset the sleep-wake issue had disappeared. I applied about all the updates that are currently available via Lenovo system update and everything still works as expected. Still strange that this issue was not solvable by any other means before...

  Interesting effect: after the reset of the touchscreen remained non-functional. After a few days without touching the laptop screen feature has finally decided to detect the HID. I certainly did not apply to update or change. 'Miracle' is almost an understatement in this case!

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• How can I make my computer will not go to sleep

  Hello

  I am trying to download some software that lasts 10 hours. the problem is that my computer goes to sleep and then resets the download so I have to start. Is it possible that I can do my computer goes to sleep, so it will not reset the download?

  Right-click of the battery icon at the bottom right of your screen and select "power options".

  Click on "Change plan settings" under whatever plan chosen power.

  From there, you can set the time it takes before your computer goes to sleep, ranging from '1 minute' to 'never '.