my computer won't let me go on my wireless connection, what can I do

Similar Questions

• my computer won't read or recognize CD or DVD. What can be the problem?

  When I try to install a software, play a CD or DVD, nothing happens.  I hear a few clicks and a humming noise, but then nothing.  I have the default to auto-play.    The instructions for the software says to follow the instructions on the screen, but they never show.  Is this a driver problem, and if so, how can I solve this?

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I remove my computer and try to connect to a different wireless network Iget "windows cannot configure the wireless connection" what can I do?

  My "wireless connection" screen does not show available networks, but gives me the message "Windows cannot configure this wireless connection".

  Should what changes I make to connect to different wireless routers?

  Hello

  You should try another network you know for sure that it is Public and open (as in the Starbucks or McDonald's).

  Wireless in general, http://www.ezlan.net/wireless.html

• delete a block - my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available.

  When you use the internet, my virus detector asked if I would allow google chrome to download a newer version. I clicked on the decline, and then my internet has stopped working. I finally got back on, but now my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available. I was able to use other browsers, but not Google. I tried disabling my firewall to see if it would work then, but it still doesn't work. Any suggestions? I'm afraid, that I blocked it somehow. Thank you!!

  Hello

  I suggest you post your question in the Google Chrome forums here: http://www.google.com/support/forum

  This looks like a problem with this specific program and not with Windows. I hope this helps!

• my computer won't let me not in facebook, said redirect, then shows just a blank page

  original title: Face book

  my computer won't let me in facebook, said redirecting, so just a blank watch... b4 this problem says something about cookies, it's a hassle.

  Milena

  In addition to the fine advice above, please see:

  Difficulty hijacked browser

• My computer won't let me download or open most programs on my laptop

  my computer won't let me download or open most programs on my laptop and the windows media center pop up all the time.what can I do? I've tried everything I can think of to fix it manually but nothing works... help?

  Original title: laptop crash

  I tried the default settings and I'm not course what is the default value of the plant... the most programs won't let me in them.i tried to back up my computer and the windows media center sign up... i can't run scans sercurity or upload anything... very frustrated and don't know if it can be fixed.thankyou to try to help If there is anything else I could try please let me know... Thanks again

  Factory default restore should be instructions given to you by your computer manufacturer.  What brand & model of computer?

• I'm trying to run the sfc/scannow command. but the computer won't let me

  How to make a console session
  I'm trying to run the sfc/scannow command. but the computer won't let me. He tells me that I need to be an administrator (which I am) and I have to run a session of consul?

  Go to start | Programs | Accessories and right click on the command prompt, and then select run as administrator.  It's a console session.

  Steve

• Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

  I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

  Hi Ranw,

  ·        What is the error message when you try to change parental controls?

  ·        Have you been able to make any changes on this computer from your account earlier?

  You can follow the steps below and check if you can make changes to the parental controls on your computer.

  Step 1:

  Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

   

  Step 2:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

  Check out the link below to check if the parental control is properly set:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my computer won't let me download games bigfish games

  my computer won't let me download games bigfish games

  original title: download

  Your question would be better asked on the Big Fish Games Forums.  Your problem seems to be that which is encountered frequently, so it is likely that they will be able to help you.

• My computer won't let me connect to my profile

  My computer won't let me connect to my profile just, it stays on the loading screen then goes to a temporary profile, how can I fix?

  Hello

  References to Vista also apply to Windows 7.
  
  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• My computer won't let me log on to my account directors and cant access programs that need administrator permission

  Log cant administrator account and it is not removed is where I was logged in and then shut down my computer and then I could not connect more please help

  When I try to log the log service failed and I already tried safe mode and I can get on the account but my computer won't let me access programs and areas requiring permission for administrators

  Hello

  When you log in Mode safe mode, it accepts the password for your administrator account? In Safe Mode, open Control Panel and select user accounts. It shows on your account administrator?

  If so, while in Safe Mode, select Start Programs/Accessories/tools system. Click on System Restore .

  1. click on the Next button. Place a check mark to show more restore Points.

  2. Select a restore point with a date and time before when you saw for the first time this question.

  3. press the Next button. Click the Finish button.

  Start System Restore and restart the computer. Make sure that it ends completely before doing anything.

  NOTE: Using Safe Mode system restore is permanent. You will not be able to cancel the system restore process.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

  I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?

  Find the serial number of your Adobe product quickly

• My computer won't let me connect to one of my accounts. The screen remains blue or said: "this product must be activated with microsoft" why is this?

  My computer crashed on me and when I tried to reboot, the computer would not let me connect to my own account, nor my accounts of family members. I tried to use the System Restore tool, but the computer says that the menu command / I'm trying to use does not exist. I don't have the CD or the floppy to boot. When I try to log in to my administrator account on the computer says, "this product must be activated with Microsoft."  Can anyone help?

  Hello

  If you are unable to connect to any user account then, how did you try the System Restore tool?

  We will try these steps and check.
  Step 1: Use know last good Configuration option and check.

  Step 2: Check to see if the problem persists in safe mode. If the problem persists not in safe mode and then try to perform the clean boot.

• Why my computer won't let me install Windows Vista SP2?

  Whenever I try to install SP2 through Windows Update, it won't let me he always says that it has failed. All solutions?

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366