My computor does not recognize my dell 964 printer

Similar Questions

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882

• Windows 7 does not recognize my Dell 2407WFP monitor - only as monitor not Plug-and-Play credits.

  This monitor is able to execute the resolution 1920 x 1200 and it worked well on the same laptop Dell Latitude D820 under XP Pro SP3. However, Windows 7 does not recognize the Dell Monitor (shows as non-Plug-and-Play monitor credits) and will go no higher than 1600 x 1200. The monitor on the laptop will run in 1920 x 1200 and also 1920 x 1200 poster XP running inside a virtual machine, so the problem is with Windows 7 not properly recognizing the Dell 2407WFP monitor in VGA mode. All other operating systems work very well to support the material properly.

  The laptop is running a NVidia Quadro NVS 120 M map. I tried several versions of Vista Dell drivers (do not have for Windows 7 - therefore Dell is not to follow). NVidia has no drivers for this card because it specially designed for Dell and all pilots must come from Dell (new Dell doesn't help here - I know that Windows 7 was just recently released but there are important suppliers for some time. Thought Dell was big by taking charge Microsoft with their business line of products but I think that even they cannot follow.

  It seems that the problem is also Windows 7 is not correctly identify the Dell monitor and many other monitors as well. Unfortunately, I doubt that this issue will never be resolved by Microsoft. I have yet to see that all the issues MS resolved long. I begin to see the truth in the last pub in Apple vs MS on television. Well the time to upgrade the new hardware.

  If anyone has a suggestion or a solution to solve this - I'm all ears!

  Don

  wait until that Dell publishes drivers for win 7 or you can contact them for the same thing.

• My computer does not recognize my USB or printer?

  I have a dell studio 1558 running windows 7 64 bit. Today, I inserted my sandisk cruzer flash disk slips into my usb port & my processor will not recognize my card or it & play hp printer. I get the following error message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  I tried to uninstall the controller universal serial bus, tried to download the new software for my cpu drivers & checked the internet for updated driver software. I also ran the computer software troubleshooting driver. No luck at all. The flash drive is plug & play & came without any software. I have 2 yellow exclamation marks in my device manager telling me that something is wrong, but I can't seem to understand this one.

  I'd appreciate any help I can get with this problem because it is quite frustrating. Thank you in advance...

  ewatt72

  I have a dell studio 1558 running windows 7 64 bit. Today, I inserted my sandisk cruzer flash disk slips into my usb port & my processor will not recognize my card or it & play hp printer. I get the following error message:

  "The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information.

  To find a driver for this device, click Update driver. »

  I tried to uninstall the controller universal serial bus, tried to download the new software for my cpu drivers & checked the internet for updated driver software. I also ran the computer software troubleshooting driver. No luck at all. The flash drive is plug & play & came without any software. I have 2 yellow exclamation marks in my device manager telling me that something is wrong, but I can't seem to understand this one.

  I'd appreciate any help I can get with this problem because it is quite frustrating. Thank you in advance...

  Hello

  What are the two! brand? You can post a screenshot in the forum...

  If you have a composite USB drive listed in Device Manager... I suggest you uninstall from Device Manager and choose search for the hardware changes...

  Step 2 - connect the USB, reboot and press F12 on dell logo, check if the PC detects the drive cruzer...

  Also check if the LED on the drive flashes once you connect... How about other USB ports?

  SanDisk has a Ko - http://kb.sandisk.com/app/answers/detail/a_id/10/~/cruzer-flash-drive-not-detected-by-windows-pc

  Step 3: Does show in disk management (right click on computer > Manage > disk management)-it appears in disk management, just assign a drive letter. Right-click on the cruzer drive - drive letter--> Add--> choose a drive letter... OK OK... Check if you can see the drive in my computer...

  Step 4: If none of the USB ports work...

  -Install the software of the system Dell- http://downloads.dell.com/utility/DSS_UTIL_WIN_R260746.EXE

  1. install the driver Chipset - http://downloads.dell.com/chipset/R242805.exe

  2. install IMEI - http://downloads.dell.com/chipset/R243176.exe

  Restart the computer... Check if the USB ports are working...

  Step 5: update the BIOS [remove all devices connected to the laptop, make sure that your battery is more than 10%, plug the AC adapter and do not remove the power source until the complete procedure]

  Do not interrupt the process otherwise it would brick your system...

  BIOS: http://downloads.dell.com/bios/R301434.exe -

  Update the BIOS, reboot the system. Try to connect the cruzer... check if it works...

• Windows 8 does not recognize Canon Imageclass D320 printer. How to install 64-bit

  Windows 8 does not not in the Canon Imageclass D320 printer.

  How can I install the driver?

  See http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware .

  Install the driver before Plug and turn on/off the printer.

• my computer (acer aspire) Windows 7 does not have the Dell 924 printer driver

  I tried a multitude of ways to download the driver on the Dell website, but nothing helped.  I am at a loss now what to do next.

  Dell provides only up to Vista 32 bit software/drivers for this model, your Acer uses win7 64-bit?

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• After the update of DVD driver from Dell, my PC does not recognize the drive at all the

  Hi, I've updated my DVD burner on the Dell Web site (he said it was important), but since then, my computer does not recognize my dvd player at all. I click on "drivers" and the system finds it online. A halfway through the installation, I get an error code, and it says "Roxio pxhelp is missing" I don't have any Roxio software on my computer! Need help with getting my dvd drive working properly! Thanks in advance =)

  Original title; DVD writer not installed!

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Reference Dell place 11 Pro - SD card does not recognize the card

  Anyone else have this same problem? I got my 11 Pro last night (from Dell direct) coming, I tried several SD cards, and none of them does not seem to work. It does not recognize that anything has been inserted into the slot. Very frustrating.

  Out of curiosity, have you tried different formatting on SD cards to see if it helped the recognition (eg. exFAT, NTFS)?

  -Woody

• Dell Inspiron 17R does not recognize the cd/dvd drive

  I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!

  I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?

  Thanks in advance!

  Hello

  See if that helps you.

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• Cannot install the drivers for the Dell 725 of CD printer as the computer tells me that Windows 7 does not recognize

  I have a Dell InspironM5010 with Windows 7 installed and you want to use a Dell 725 printer with it. I have the CD with the drivers of the printer, but can not load as the computer tells me that Windows 7 does not recognize

  Original title: ask the community

  Your CD is too old, but you can be lucky...

  Is there a downloadable file here for your printer...

  http://www.Dell.com/support/troubleshooting/ca/en/cadhs1/product/Dell-725

  .. but this is for Windows 7 32-bit ONLY, and I have the feeling that your OS is 64-bit.

  Windows may have a driver somewhere see here for how to find...

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• My Dell laptop does not recognize the DVD / CD player or D drive more.

  My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

  Original title: DVD player

  If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

• Epson TX420/NX420 Dell printer does not recognize my printer. I am running Windows 7

  Dell does not recognize my printer.  I am running Windows 7... I went through the Setup Wizard process which took me to Driver Detective a sign facing upwards. The computer is new and the printer at the age of 15 months. Can you help me please?

  Check with Epson to see if there is a test or diagnostic process that you can follow in order to test the printer and make sure that it works correctly.

• Dell XPS 13 (L322X) does not recognize Dell U2713HM

  Trying to connect my new laptop / monitor - but my toys will not play with me. Have connected each via supplied usb cables (most mini dp - DVI adapter + dvi cable). Received the error on usb install re failure / unknown device? When running Dell display manager error I get following:
  «This program requires a Dell monitor and driver support compatible display.»  If you think that your system meets these requirements, try power cycling the monitor and/or update the display driver. »
  I downloaded the drivers from the dell site, but when run Setup it does not recognize the monitor and thus used to install drivers
  -little a catch 22?  do I need or there at - there a way to force the installation of the driver? Assumed that these devices are compatible and if yes, can I someone help me?

  Thank you very much!

  -Craig.O

  

  It seems that the problem is with your "mini dp - DVI adapter + dvi cable. Try a direct connection, without maps, and you should be all set.

  (Install the drivers manually is possible, but won't help here.)

• My new Dell win 8 PC does not recognize my CS5 install disc.

  My new Dell win 8 PC does not recognize my CS5 install disc.

  I'm ready to upload to the web, but I can't find the right site.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html