My count does not recognize a disc in my D drive and so I can not burn discs.

Similar Questions

• My laptop does not recognize that there is a hard drive and so I can't eject one who is stuck in it. What should I do?

  I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?

  Hello

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =======================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• Yahoo counter does not appear on my Web page

  My Yahoo page visit counter does not appear on my Web page in Firefox. The counter is displayed in Internet Explorer.

  Do you still have this problem in Mode safe? If you do not, it is most likely one of your extensions/plugins. You can troubleshoot your plugins by entering Safe Mode. Follow the instructions below to enter:

  • Click Help > restart with disabled modules
  • In the dialog box that appears, click start in Safe Mode .

  If you do not see the problem, one of your extensions. First, you must disable all extensions and then re-enable one by one to find which is the cause of this problem.

• burner CD/dvd does not burn but plays the media on drives

  I tried to burn music on a blank cd but it keeps opening the cd/dvd tray and invites me to insert a blank disc. I also tried to burn a movie I would have done on a dvd, but does not recognize the blank dvd even though it's brand-new. He seems to be able to play CDs and CD-ROMs, but does not burn. pls help. Don' don'tknow what else to do. I already uninstalled the cd/dvd drive and installed again, no dice. Thank you!

  Hi mamiskorason,

  The following suggestions may be worth looking at:

  1. run the automated Microsoft Fix It's that automatically diagnoses and fixes common CD burning issues.

  The problems of the CDs or DVDs

  2. in addition, please go through the various other suggestions in the article below.

  Troubleshooting the CD or DVD in Windows Vista drive problems

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G50 - 115 - DVD drive does not burn anything

  Recently tried to do a recovery plus two discs but the player refused to burn but come with 0E01B5-26-2AO444D9 error Code.
  In fact, it does not burn anything but will play.

  Hello

  Have you tried different CDs and DVDs from different manufacturers?
  You must proceed as different disks from different manufacturers are not 100% compatible.

  I had similar problems, burning data to CDs or the different DVD
  Then I tested the drives from different manufacturers, and that was the key!
  Everything worked properly!

  I made good experiences with disc Verbatim and TDK R (CD and DVD)

  I think you should also test some discs

• Software Sonic does not burn DVDs on Satellite 105

  Hello

  I have a few movies that I downloaded via Windows movie maker, but did not burn. I edited movies with all the works, I was able to burn using CD disc, but does not burn with a DVD-R disc.

  My other attempts involved using the pre installed Sonic DVD maker software, but I couldn't transfer my films to the library of windows movie maker (WMM). How can I do this? I tried to import the movies, but the Sonic would be important only videos found in the "My videos file", I transferred a movie in my video folder and was able to transfer it to the sound library, however, I couldn't find a way to edit the video, the software Sonic does not appear to guide you on the steps to do , in contrast to WMM.

  Any comments would be greatly appreciated since I've lost too many CD drives already.
  See you soon

  Hello

  I put t know if Windows movie maker is able to burn on DVD s. I presume that it s is not possible. I checked the WMM options and it seems it is only an option called save on CD and nothing on the DVD.

  I don t use Windows movie maker but another application called Nero burning ROM.
  It really great software s. I installed some add-ons and I can create DVD movies and play with the DVD drive simply.

  I recommend to check and test the Nero!

• L750D satellite does not burn CD

  Whenever I try to burn a cd using I tunes or nero my hard drive will be cick make noise that it is looking for a drive, but it does not burn the cd, then guard asks me to insert a blank disc and I've tried many discs and I get you answer.

  Anyone has any ideas at all?

  Hello

  You have the same problems of burning DVDs / CD?
  How did you notice this problem?
  It seemed after installing iTunes?

  I had some experience using the iTunes (now I m using Android?)
  However, in my case, the itunes software messed with the registry.
  I don t know why, but after itunes was installed my software butted another was not able to manage disks.

  In many cases, I uninstalled itunes, cleaned the registry and removed the filters upper and lower of the following registry entry:
  HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet \Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}

  I restarted and can burn the discs

  However, it is also possible that's not a solution for you. It is possible that the laser lens cannot read disks, this could be caused by the lens of clean soil with piece of cotton and alcohol sometimes that helps too

• create dvd Windows does not burn music and slideshow

  Windows 7... When I add the photos and music I can listen to samples and it is great. But after I burned the dvd and go to replay theres no music. the first time I did it, he put some music with it, but I changed some of the music and he burns the original stuff I had on this subject, not the new. Help, please

  I started all over from scratch, and it does not burn any music now.

  Hi tcfs,.

  Welcome to the Microsoft community. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. what application did you use to burn the pictures and music?

  4 you get an error when you are unable to burn music on the disc?

  I suggest you to refer to these articles and check if they help.

  Burning disc for Windows 7 tips: http://windows.microsoft.com/en-US/windows7/Disc-burning-tips-for-Windows-7

  Burn a CD or DVD in Windows Media Center: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-in-Windows-Media-Center

  Windows Media Player, frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-frequently-asked-questions

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Satellite L30 PSL33E: After downgrading to XP DVD-RAM does not burn

  My laptop (Toshiba Satellite L30 PSL33E) provided with Windows Vista but it is very slow with this OS and one of my friends downgrade my OS XP.
  But now my DVD-RAM does not burn!

  Install the driver DVD - RAM Toshiba v the European driver Toshiba page 5.0.2.5

• Equium A60: Does not burn the DVD?

  Hi all

  Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive...

  Ive tried Philips DVD + RW and DVD + R Sony but still no luck, I know that for some DVDs, you must first delete it, but the drive is not even delete them... On the drive, his engraver of DVD multi and the rewritable clearly marked... so am confused at why his does not work... Ive also tried to use Nero to burn DVDs but no luck

  Any help appreciated thanks

  Ammunition

  Hello

  What s on DVD-R and DVD - RW?
  I also suggest trying different brands of DVD.
  Generally, you will find a list of DVDs and CDs, tested and compatible media in the user manual. Check it out.

• Media Player does not burn audio discs

  When I try to burn an audio disc, I get a message saying that Windows has a problem (unspecified). This does not happen if I burn a data disc.

  I have Windows Vista (Service Pack 2 installed recently). Following the advice I reinstalled the drivers from the chipset (laptop Advent 6311). This does not solve the problem. What should I do?

  Hello

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Thank you.

• SCCM 2012 software R2SP1 of count does not

  Hello.

  Currently our software control seems not to function. It is set up on the side of the console. It appears on the workstations that something does not work correctly.

  In the mtrmgr.log file, I see the following messages on a constant loop.

  InitiatePrepDriver - function OpenSCManager failed with error 8007045b mtrmgr 2015-12-09 11:07:03 11096 (0x2B58)
  Cannot create instance of CLSID_ProcessEventProvider, error 80040154 mtrmgr 2015-12-09 11:07:03 11096 (0x2B58)
  Cannot create instance of CLSID_SWMtrManager, error 80040154 mtrmgr 2015-12-09 11:07:03 11096 (0x2B58)

  In the SWMTRReportGen.log I see the following:

  No data were found for generating software metering usage don't report SWMTRReportGen 2015 - 10 - 12 2:04:56 AM 6428 (0x191C)

  It doesn't seem to work at some point, until we have done the SCCM upgrade to the current version. It seems that the count on the machine fails to start.

  Any thoughts on what we can try on the client side?

  Yurij

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• C7280 ink counter does not work

  The ink on my C7280 wife meter does not record ink, even with new cartridges. It also does not generate a down or ink messages. Any ideas?

  XP - Pro SP3

  print USB or wireless

  Message edited by WLK 17/03/2009 17:00

  I did the cold Reset and ink counter works!

• Yet CS5 does not burn m4v on Verbatim Blu - Ray disc?

  I have CS5 and burner Pioneer BD - RW BDR-206 (1.04 Firmware) drives and made my first program Blu - Ray in first CS5 and exported on Blu - Ray (m4v), but when trying to burn it on my system, Encore CS5 doesn't recognize not the blank disc (Verbatim BD - R 25 GB 6 x HardCoat) and keeps asking for a disk.

  I put in a regular DVD and he recorded it without problems... but it is Blu - ray.

  What is going on?  I have to do a 'simple' mistake somewhere.  Thanks for your help.

  Sounds weird.

  The project value BD?

  You have the settings panel of comics and drives and BD - 25G?

  Can you build in a BD folder?

  Many of us prefer ImgBurn to burn real disc. You can create a folder BD imager and try burning with ImgBurn.

• Record/play why my pc does not burn a cd of sound? He's going through the motions, but there's nothing on the disc when it finishes burning?

  Why my pc is not burn a cd? He's going through the motions, but there's nothing on the disc, cd, when it finishes burning. It was working ok and then just stop?

  Hello

  ·         What operating system do you use?

  ·         What application are you using to burn the CD?

  ·         What exactly you are trying to burn on the CD?

  .      There the latest changes on the computer before the show?

  Please provide us with more information about the issue so that we can help you further. During this time, I would suggest to run this Microsoft fix it to the tool and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/