My CS will not start with error code 16

Similar Questions

• Windows Vista SVC PK2 after installation computer shut itself off the coast and will not start a error code: 0xc0190005

  After SVC PK 1 installation, windows vista everything was ok.
  After installation of SVC PK2, the computer said install, then stop and now does not start, either in safe mode, or the title of system repair.
  the computer is a laptop HP dv9543cl.
  I can't do anything to install, no period.
  the system crashed.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/computer-hangs-in-boot-after-installing-Service/c9b10050-e68e-45aa-99CA-0da3fc9851eb

  It will be useful.

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my Media Player will not rip CD; error code c00d10d2

  Media Player will not rip CD. error code c00d10d2

  Hi kenny blair

   

  You can check if the methods provided for a similar problem in the below link passes the problem-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/unable-to-rip-music-using-Windows-Media-Player-11/8d8ccf1b-6959-4844-8aa3-3aac7d9efa1a

   

  I hope this helps.

• KB2544035 update will not install. Error code 80070643

  This update maintains not to install automatic update with error code 80070643.
  When I followed the link for more information or support that it leads me to a page on the essentials of security, but there is nothing about the update.
  I searched this update on the Download Center, but can't find anything.
  I use no essential security because I have other anti-virus software, but I wonder why it will not download.
  Help, please.

  This update maintains not to install automatic update with error code 80070643.
  When I followed the link for more information or support that it leads me to a page on the essentials of security, but there is nothing about the update.
  I searched this update on the Download Center, but can't find anything.
  I use no essential security because I have other anti-virus software, but I wonder why it will not download.
  Help, please.

  KB2544035 is for the Microsoft security updates.
  If you have not MSE, no idea why the update is offered.

  You don't need it. Thus, 'hide '.
  Use this tutorial:
  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  I suggest change you the manual Windows Update setting, no car.

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/120695-Windows-Update-Windows-automatic-updating.html

  Go to the #5 step.
  5. to activate the automatic update without automatic installation

• SSTP will not start. Error 2.

  I need help to find out why the SSTP service on my lapyop will not start.

  Error is:

  Windows could not start the SSTP service on the local computer.

  Error 2: The system cannot find the specified file.

  The dll that service points is actually in the system32 directory, and I even replaced with that of another phone exact same that's working and I still get the error.

  I tried sfc/scannow and some not found errors.

  Everything is said in the event log is that the service could not start because the specified module could not be found.

  Please don't tell me to restore my computer that I can imagine that will work but probably someone out there has a solution. Thanks for any advice.

  Hello

  I suggest you try the steps below to resolve this issue.

  Step 1:

  Reset TCP / IP:

  a. Click Start > all programs > Accessories-> command prompt (right click and choose Run as administrator)

  b. at the command prompt, type:

  netsh winsock reset

  c. ignore errors and restart.

  Step 2:

  LocalService and NetworkService to the group administrator:

  a. Click Start and search CMD. Right-click on it and choose Run as administrator.

  b. at the command prompt, type: type the following command:

  net localgroup administrators localservice / add the Group of local administrators LocalService / add

  net localgroup administrators networkservice / add localgroup administrators NetworkService / add

  c. close and restart the computer.

  Thank you
  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• SatelliteU300 will not start with power connected and fully charged battery

  I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

  Any help appreciated.

  Hello Andy

  Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

  Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

  Bye and good luck!

• KB2597098 does not install with error code 0 x 80070643

  I have three updates that will not be installed.  KB2597098, KB2596520 and KB2596954.  All three give me the error code 0 x 80070643.  I've lived all items and help I can find.  I have run "FixIt", verified service dares, update the update of windows, repaired the files Net.4, rebooted several times.  Nothing helps.  Can anyone help, or am I convict?

  I am running XP Pro 32-bit with service pack 3.

  I give up.  Will reformat the hard drive and reinstall the system.

• computer will not start with the disc

  I use vista and my computer does not start because of a corrupted file.

  I put my vista disk in such suggested, but the screen does not move any command of keys to press and just goes round in a loop. So I can't the computer to start and fix.

  I changed the bios to boot from the cd as first choice but still no results.

  can anyone help?

  Could it be that the disk driver does not work like the disk isn't loading? Or the disc will not load because the press any key order is not coming?

  I am old enough and not very technically experienced but this computer has served me well and I have a lot of information that I need to go down there if I have to buy another.

  Any help would be greatly appreciated.

  If you have correctly setting the boot order in the BIOS to CD/DVD first, and the computer does not start, your problem has nothing to do with the driver for the CD/DVD drive. Also running in safe mode or SFC can maybe help you.

  The reason that pilots, safe mode and FCS can help you is the same for all three: boot (if from the hard drive or a CD or DVD) takes place before loading Windows. If it boots from a CD or a bootable DVD, the problem has nothing to do with Windows. It's a hardware problem. I don't know what the problem is, but it is possible that the CD/DVD drive is dead.

  What is wrong can but fixable, but whether it is cost-effective to do so is another matter. It depends on what the problem is. If the CD/DVD player, they are inexpensive, so replacement should not be expensive. Fortunately, it's not like there is a problem with the hard drive, so even if you buy a new computer, you must be able to remove the hard drive from the old computer, put it in an external enclosure and to transfer the data to the new computer.

  Let me add another point: you say "I have a lot of information that I need to get off it if I have to buy another." This suggests that you don't regularly back up your data on an external support. If this is the case, you've played with fire. It is always possible that a hard disk crash, the user error, close to love at first sight, virus attack, even stolen computer, can result in the loss of everything on your drive. As it has often been said, it is not a question of whether you will have a problem, but when.

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye

• GTX 750 will not start with HP P7-1233w

  Hello
  
  I use a desktop PC HP P7-1233w and the EVGA GTX 750 will start at the HP Logo blue screen and after about a minute it will boot to a black screen (and that's all). When I leave the card it starts very well. I know that my diet is very well that others have used a GTX 750 Ti with the same block of power SUPPLY HP OEM as mine.
  
  When the system comes on, I hear the spinning card fans. So I don't know, it's getting power and video. I tried everything, including clear CMOS. I also started in Mode safe, off the map graphic, firm and installing the card. Just to get the same thing.
  
  In my system motherboard is a MSI MS-7778 (Jasmine). I thought that it could have something to do with the UEFI settings and inheritance, but there is no option in the BIOS and there is apparently no updated BIOS for my motherboard.
  
  If someone could help me, that would be greatly appreciated.

  Hello

  HP P7-1233w was released in may 2012, and HP has not started to ship full UEFI level consumer computers to office until the middle of October 2012.

  Modification on the motherboard to a card mother UEFI would require a new license of Windows 8. Windows 7 will not work in UEFI mode without some special hacks.

• CD/DVD getting not recognized with error code 0 x 8007003

  Original title: Windows Media Player

  my lap top will not come CD dvd I used microsoftxit as fair, he told me that it can not detict cd dvd and error code 0 x 8007003 can do everything what it means please

  Hello

  • What operating system is installed on your computer?
  • You did changes to the computer before the show?
  • What Microsoft fixit did you use?
  • What is the full error message that you receive?
  • What is the number and the model of the laptop you are using?
  • Should be restricted to any particular CD/DVD?

  Try the suggestions in the link and check if it helps:
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

• After you have installed a second drive, computer will not install updates-error code 0 X 80070011

  Original title: it seems that since the installation of a second drive hard, PC will not install updates. They continue to fail.

  HP pc running windows 7 Home premium. error code 80070011

  Hello

  ·        What updates you are trying to install on the system?

  ·        What is an update of the application or a Windows update that you are trying to run?

  ·        If it is an update of the application, where the application, first hard disk is installed or the second drive?

  Error 0 X 80070011 occurs when you try to update any application which is not present in the location.

  For more details, see the article mentioned below.

  Error: ERROR_NOT_SAME_DEVICE (0 x 80070011)

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/a2a6876d-eb2e-4238-98a9-4933ad5da996

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.