My cursor jumps to the right and cannot use it for games. Have the Toshiba laptop and Windows Vista Edition using Home Premium pack 2
my jumps to cursor to the right of the page and will move for me when you play as Bejewelled. Have laptop Toshiba and use Windows Vista Premium Pack 2.
Hello
You did recently change?
It is while you use other applications?
I suggest that you update touchpad and display drivers for the cards and check.
1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. in Device Manager, locate the touchpad, and then double-click the device name.
3. click Driver tab, then click on set to update driver and follow the instructions.
4. now Locate Display Adapter and then double-click the device name.
5. click Driver tab, then click on set to update driver and follow the instructions.
Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
You can also change the touchpad settings and check.
To do this:
1. click on start
2. click on Control Panel
3. Select mouse and then check the settings
Thank you, and in what concerns:
Swati Keni-Microsoft Support
Tags: Windows
Similar Questions
-
"U.S. / Canada Distribution only" disk for use in the United Kingdom?
I want to buy a new copy sealed the Windows Vista Edition upgrade disk Home Premium. I found one on which the label says "for distribution in the United States / Canada only. Will this work without problems on a PC in the United Kingdom please? Thank you.Hello
Yes, it will work. However I recommend to buy the disk to upgrade of the United Kingdom.
The Windows Vista DVD upgrade that you get in the United Kingdom is different from what they get in the United States.
Please follow the link menitoned.Choice of installation for consumer versions of Windows Vista (32-bit only)
http://support.Microsoft.com/kb/932616I hope this helps. -
Mainstream support for Windows Vista ended on the extended support ends 10/4/2012 on 04/11/2014. Standard support for Windows 7 ends the 13/1/2015-extended support ends 14/01/2020. However, I have seen conflicting reports on whether or not my editions of these operating systems use will be updated under the extended support. For example: http://support.microsoft.com/lifecycle/?p1=11920&wa=wsignin1.0 and http://support.microsoft.com/lifecycle/?p1=14484 give a date until when these operating systems will be supported in respect of extended support (and I chose the editions of these operating systems use).
Is anyone able to solve this problem?
In addition, if these operating systems do not fall into the extened support, is it urgent that I improve my Vista PC to Windows 7/8?
Hello
When you're ready to. I got a Windows Vista unit which still works very well in her new home.
Rather than update why you do not take a look at some sales for Windows 8/8.1 units. There are really some very good deals on the internet.
That means the end of Support
-
Microsoft Frontpage 2002 SP3 is compatible with Windows 7? I intend to upgrade to Windows 7 from Windows Vista, but my most important request and the need is to maintain my web page that was created and is managed by Frontpage 2002.
This is the Forum for Windows Update .
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Windows 7 Hardware/Software Compatibility Center.
For any other question of Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.
See you soon. Mick Murphy - Microsoft partner
-
Cannot open files with Windows Vista Edition .hlp Home Premium
I installed winhlp32.exe, but I can't always open up .hlp files. I get the same error as before the installation of winhlp32.exe. I rebooted my system.
Hi Sami345,
Since it's a non-English language error, you must go to the appropriate website for assistance.
We do not support the English versions of Windows.
Try the link below and see if you can get the support you need.http://www.Microsoft.com/communities/forums/default.mspx
Matt
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
My question relates to the use of Windows Vista Edition backup Home Premium 32-bit
I use Windows Vista Home Premium 32-bit backup to create a backup on an external hard drive files. the disk is almost full, I noticed the backup appears to create a new set of files each time that it will consume a considerable amount of space. Is it safe to delete old files to free up disk space as current backup do not complete due to lack of space. I don't want to lose all the essential files in the erase process.
Yes, you can delete the old files, because they are not needed when the new backup is created.
My suggestion is to set up a backup incremental and will ovewrite the old backups so that you don't have to delete old backups. -
Hello
I have a laptop Lenovo G550 with processor dual-core Intel, 4 GB RAM, 320 HDD with Windows Vista Home Premium 64-bit works fine yesterday. All of a sudden all processes be losed with strength and i' received e of error messages to send information or the rejection message. And then he suggested e to perform the disk check so I tried to restart to get the following message.Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014CI tried all the boot options like the boot safe mode, last known, good configuration but without success.I tried to fix it by using a Windows Vista DVD,Press any key to boot from the CD/DVD...I see a bar saying Windows is loading files in progress...After that, I get progress bar of Microsoft Corporation followed to a black screen.After 10 minutes or so I get a mobile mouse on the black screen pointer. And that's all, he remains the same for centuries.I am out of resources on how to solve this problem.Any help will be greatly appreciated.Thank you.Hello
That's what you should see when you use a Vista DVD take to do a Startup Repair:
http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/
You have obviously something wrong with it.
See you soon.
-
I want to contact microsoft to plan the new linses to activate the software
There is no way to disable a Windows. Install Vista Home Premium on the NEW PC and try to activate it. If activation fails, activate your Windows by phone. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
-
The LifeCam Cinema hardware installation error
Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium editionLifeCam installed on my laptop XP
Hi seuss460,
LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.
You can download software LifeCam here
Step 1: You can follow the steps mentioned in the article below
Troubleshoot installation of Intellipoint and IntelliType LifeCam software
http://support.Microsoft.com/kb/953691
Step 2: See also the steps mentioned in the article below
Troubleshoot failures to find the new LifeCam hardware
http://support.Microsoft.com/kb/929087
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.
Hello
Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
So usually loaded at the top of the screen.There is also usually a TouchPad control utility that loads in the Notification area next to the clock
at the bottom right.Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jspToshiba downloads - access your model.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba forums - good source of info from others who have the same system or similar
http://laptopforums.Toshiba.com/Check with the manufacturer of system support, documentation in line, or forums as there probably
are shortcut keys that enable and disable the touchpad functions.Also check the control - Mouse - touchpad settings panel.
You can also try this:
Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
(drivers), now right CLICK on the touchpad and UNINSTALL.Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
RESETThis will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
of work.Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
device if present.
http://support.Microsoft.com/kb/310575Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
and get the latest touchpad drivers.Download - SAVE - go to where you put it-click on - RUN AS ADMIN.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
I'll be able to restore the backup taken before improving the operating system of Windows Vista Edition home premium for Windows-8
Hi GOURGOPALGHOSH,
Welcome to the Microsoft community. Yes, you will be able to restore the backup before the upgrade to Windows 8. Follow these steps:
(a) press the Windows key + W.
(b) type of recovering files of Windows 7 , and then press enter.
(c) restore files.
I hope this helps. Let us know if you need more assistance.
-
I have a Toshiba laptop with Windows 7 Professional 64 bit installed and would like to change to Windows 7 32 bit. How can I do this?
Original title: Harold
Usually this is impossible on computers with Windows 7. In almost all cases, you need to go to the store, buy Windows 7 32-bit and use the CD to install it on your computer. This also requires the deletion of your system, you will need to reinstall all your programs and settings.
-
How can I change the Welcome Message on windows vista edition Home premium?
OK, I want to change the welcome message in windows vista when my pc loads, it says welcome.i want to change to accommodate Fred as his load. And I don't know how to do this.
Hi Bigboy316,
The video offered by Murphy will work, but you'll need Reshacker: http://www.devhood.com/tools/tool_details.aspx?tool_id=420 to do so. It's actually quite easy and foolproof, simply follow the steps: http://www.youtube.com/watch?v=3Tv_vjQd7Rc&NR=1&feature=fvwp
-
dual boot windows xp and windows Vista Edition family premium does NOT
I try to install the dual boot of windows vista Home premium with windows xp. And no matter if I try to upgrade to windows xp or windows vista, they want to run scan disk on the opposite partition. Windows xp is on C: and E: is Windows Vista
XP you can skip scan disk and it will work. Vista requires you go back and run the disc scan
That's happened?
http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm
http://apcmag.com/how_to_dualboot_vista_with_xp__stepbystep_guide_with_screenshots.htm
http://www.syschat.com/dual-boot-Vista-XP-Vista-already-1946.html
Read and follow the links above for dual boot.
See you soon.
Mick Murphy - Microsoft partner
-
How do I change the language setting in windows vista edition Home premium.
I have a sony vaio that runs on the Italian version of window vista Home premium. How can they change the English language instead of Italian language
I gave you information on what to do.
Here is the link to Microsoft:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-display-language
See you soon.
Maybe you are looking for
-
Satellite A200-TH7 - Windows Explorer not responding
At random times (normally when I wake the PC) and I click on the volume control in the taskbar, nothing appears.Then I'll go to move the physical volume control cursor and nothing will happen. However, at this time, I'll try to click anywhere on the
-
Myst V - end of age cannot detect DirectX 9 on Windows se7en.
I installed Myst V - End of Ages and during execution of the game, I got an error msg saying msvcr71.dll was not found. I have run the detection tool that comes with the game and it detected everything with the exception of directx 9. My system specs
-
is it possible to replace the battery vaio vpc?
The main battery on my vaio vpc begins to degrade. I have an extra external battery, but it is heavy. Is it possible to install a new primary battery - where could I do in New York?
-
computer will only start in safe mode, always samekh in normal mode
Original title: help computer will only start in safe mode, always samekh in normal mode.any ideas?
-
Satellite p205-s8811 won't start normally or in safe mode just automatically get a black screen
I started my computer and start the recovery window came. I ran it and it has to solve the problem and computer ran very well. I stopped him and 6 hours more later powered on and the same thing. Startup recovery ran and solved the problem again. Whe