My daughter's iPad does not connect to my network, although mine don't?

Similar Questions

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

  Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

  Have you ever tried troubleshooting mentioned in this article?

  If you cannot connect to a cellular network or cellular data - Apple Support

• Widows XP does not connect to my network.

  Widows XP does not connect to my network. (wired or wireless) The network is functional and all I can understand is ipsec driver service could not start because the specified file is not found. I tried to reinstall the drivers for my wireless card, an external wireless adapter and plug it directly into the router. It detects the network but will not connect to it.

  This could be caused by a virus.  What application antivirus do you use, and is up to date?

  In particular, see tcpip.sys.

  There are probably several copies of this file on a typical system of Windows XP.  The copy of 'work' found in C:\Windows\system32\drivers with a backup copy in C:\Windows\system32\dllcache.

  You can have additional copies in C:\Windows\$hf_mig$\KB951748\SP3QFE and C:\Windows\$hf_mig$\KB2509553\SP3QFE

  Assuming that your system is up-to-date, the tcpip.sys version should be 5.1.2600.5625.  It should be 353 KB (361 600 bytes).

  You might consider doing a virus scan online with, for example, http://www.eset.com/us/online-scanner/ or download and analysis with the multi-AV tool of David Lipman, which you can find here http://www.multi-av.thespykiller.co.uk/

  I also suggest to download, install, update and equipped with a system full scan with two of these free tools:
  Malwarebytes AntiMalware
  SUPERAntiSpyware

• My computer does not connect to my network... !!!

  Hi, my Dell laptop (Inspiron 1420) work properly after that only after a certain time he reported that the wireless card will not work correctly. Now, the laptop does not connect to my network more, even with cable LAN, I checked the Device Manager and I found a yellow exclamation on the Microsoft ISATAP #2 map then I double clicked it only to discover in its properties of this statement, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Well, I try all I can, but the problem is still there, and the laptop won't always connect to my network, please anyone has an idea as to what I could do please answer as soon as possible. tThank you.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• My computer still does not connect to my network

  I don't know why, but my computer still does not connect to my network. I think that I have is that one day google chrome sayd that something has stopped. It was something about the proxy options. He finds that google chrome could not find any proxy... ehhhh thing. I don't know what his name. but can you guys please help me about this?

  :)
   
  Original title: network problem

  Hi Jakop

   

   

  Thanks for posting your query in Microsoft Community.

  According to the problem description you provided, I understand that you are facing in network problems in Windows 7. I will certainly help you in this matter.

   

  You use a wired connection or wireless?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• Want 4520: Hp Envy 4520 does not connect to the network

  4520 nine will recognize my home network and I put the password correctly, but it does not connect.  Went all out and under tension, but without success. Never had such a problem with other devices. I printed a diagnostic of the printer which suggests some issue with MAC address filtering on my sky router but have never enabled MAC address on my router filtering - a) would not have any idea how he b) have never had this problem with other devices then why now? Help please

  Hello

  Download and run the Installation Wizard of HP printer from the link below to install the printer wireless.

  www.HP.com/go/Tools

• Vista does not connect to the network at startup folders

  Unlike XP, Vista is not automatically mapping/connecting to my WiFi network at startup folders.  Every time I have start or restart, Vista does not connect to them, and I have to manually complete the task.  All folders that I want to connect to are marked "Reconnect at logon."  How to get Vista to connect to these folders when connecting as it is supposed to?

  Hi Peters4,

  I have some questions I need to ask:

  Once have connected you to the computer, you still see the disks with a red X on them or they have gone completely?
  If they have the red x, connects by double-clicking on them?
  If you are prompted for a password?
  You map drives using an IP address instead of a name of sharing?
  Are you using the built in Windows Vista wireless client or other software to connect to the wireless network?

  You could try the following drive mapping and see if that fixes the problem:

  • Press Start.
  • Type CMD in the Search box and press ENTER.
  • Right click on cmd.exe and select run as administrator.

  At the command prompt, use the following command:

  net use x:-\\nom_ordinateur\nom_partage\ / persistent: Yes

  (where x is the drive letter you want to assign.)

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• T61 does not connect to the network through a station

  I have a T61hat all of a sudden this week the network connection has stopped working when I am connected through my docking station. If I remove and plug the network cable into the T61 it immediately connects, but when I first connected it does not connect. It was working fine earlier this week. I was reading some email in Outlook and suddenly realized that I had lost my network connection. I tried to run the utility Lenovo system update and the updates of Windows and I'm perfectly up-to-date. A virus scan that found nothing. I tried to uninstall the driver of my network and then restart and allowing PnP to reinstall. None of this has worked. Also, I have a partner who has also a T61 with a docking station. I plugged my laptop on my own and got the same results, so this isn't a hardware problem with the docking station itself.

  Our technicians of equipment replaced the motherboard in my T61 and that seems to have solved my problem. Haven't seen the network problem in a week now.

• iPad does not connect to the Macbook

  Hello guys, please, help me

  So, I wanted to add the iTunes music on Macbook Air to iPad mini2

  I connected with the lightning for Macbook iPad and it shows me, that he is in charge, BUT in 1 SEC is disappears. That the load again, that disconnected

  It continues until I disconnected iPad Mac

  When I reload decision-making power-everything is good

  When I reload iPhone with THIS cable-all is good

  Please, I need help

  Thank you

  Have you tried to plug the USB cable into another USB port on your macbook air? If it still does not respond, try to restart your iPad Mini and the Macbook Air, let me know if that solves the problem.