My DDexterne undetectable (detected as a printer)

Similar Questions

• Satellite L300D cannot detect the wireless printer

  Bought an advent AW10 wireless printer that is connected to my router from sky.
  The laptop cannot detect if. I managed dected on netbook to my daughter so I know this isn't a problem with the printer or router and I also tried detect it with the firewall disabled to rule out the possibility of being blocked.

  Does anyone have other ideas?

  The interest to buy this printer was so that it can be connected wireless to want do not connect through a USB cable.

  Hello

  Have you turned on the WiFi on the laptop Toshiba successfully?
  You must move the switch wireless POSITION until led WLan would be on and must use the FN + F8 option to select Wlan.

• OfficeJet 5160: Printer detected but not printing

  I connect to my computer to the Officejet printer, the printer is detected, but when I try to print documents just add up in the print queue and do not print.

  I tried to reinstall the printer driver, replacing ink - no luck

  the strange thing is that when I run the driver updated prints a test page - and that print!

  no idea how to solve this problem?

  Hi Spaarvap,

  I'm sorry to hear that your print jobs stuck in the queue and not print.

  We have a convenience store guided to this issue which can be useful.  Take a look at this document.

  Upwards, you will find the link to the guided troubleshooter.  You can also read the information in a document.

  I hope this helps solve your problem.

  Jean

• Windows XP (SP3): Assistant of new equipment can detect non-existent "printer" at startup * AND * chronic blockages mouse

  In recent weeks, my copy of Windows XP (Service Pack 3) maintains 'detect' a 'printer' at startup, but can never find drivers for it, even through the Internet.  The new device Wizard never identifies the element as anything else as "Printer", or I don't see an unconfigured device listed in material anywhere, Manager even if the wizard repeat myself that the installation of the driver is not.

  I have a printer connected to the computer: an HP DeskJet 932 C printer.  However, the old driver worked very well, and I get this message regardless of whether if the printer is physically connected to the PC.  The printer was initially connected via a parallel cable, and I've been using a USB cable, with no improvement.  I also downloaded and installed the latest driver from the HP support site; still, there is no improvement.  I also followed the instructions on the linked page, and the problem persists:

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;298370

  Finally, around the same time the "printer" problem has started, the PC started suffering from sporadic blockages mouse: at irregular intervals after the start (anywhere from a few seconds to hours), the mouse stops responding completely.  I tried using two different computer mouse (the two USB), and the problem has occurred at the same time.  I can't prove it, but given that these two problems seem to start at the same time, I tend to think that they are related.

  The PC itself is a Dell Optiplex GX260, with a 3.06 GHz P4 and 1.5 GB of RAM and plenty of space (20 + GB) of free space on the C: drive

  Please, please, * help to please!

  Hi Ellakite,

  Glad to hear the problem is solved.

  Check if there are any drivers listed in the printer server properties and delete the same.

  You can use the command to remove drivers below. Follow these steps:

  a. click on start

  b. click command prompt

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. click on the port tab and remove port

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 can't detect the wireless printer

  I recently bought a Canon MG5250 1 wireless printer while. I got it connected to my router according to the Canon instratuctions, I have a laptop with XP that I have completed the installation with a CD, it detects the printer and print wirelesly without any problem. I can ping the IP address of the laptop XP.

  However, I have a 32 bit Windows 7 laptopn which can print on the MG5250 via USB but the installation CD does not detect this wirelesly, he cannot ping the ipaddress either. I tried to install with all firewalls and the disabled antivirus scans and network settings are set to automatically detect the network. I have connected to many networks account invited to the clients and Hotels without problem.

  Can someone help me please?

  Hello
  Please see this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Canon-software-for-MG5250-printerscanner-wont-work/dadab50e-1021-4F03-bf00-261929e1317b

  Follow the two links in the response from Imran and you should be good to go.

  I hope this helps.

• Utility HP cannot detect my C3180 printer wireless Airport Express

  I am on OS x 10.6.5 and you just install the full featured version of the HP software for my printer C3180.

  I managed to install the printer via Apple Airport Express which connects the printer to the Airport Express using a USB cable and I can print OK from my Mac to the printer wireless.

  I now want to use the other features of the utility HP (particularly Scan) but when I run the HP utility, I get a message that my printer is not available which is not correct because I just printed to it. The following screenshot:

  • error message after the launch of the HP utility
  • Screen print & Fax (in preferences) showing the printer are available

  I'm sorry.  I reread your original post and visited account you have it plugged into the USB port of your Express.  Who is responsible ONLY for printing, not port scan.  I'm sorry.

• PDF files can not detect my hp printer

  Hello

  I can not print all of my pdf files. Whenever I clicked on the button print, it says "before you start printing tasks for example page put in place or document printing, you must install a printer. How is that possible? I recently installed my HP deskjet (wireless) 3052 successfully. I can scan and print other documents except PDF files. I can even use the HP eprint.

  Hello

  1. what browser you are using to print PDF files?

  2 has there been recent changes made on the computer before the show?

  Please follow the provided steps and update us with the results.

  Method 1: Change your default printer

  I suggest to change your default printer by using the steps described in the article and check if it helps.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-your-default-printer

  Method 2: If you use Adobe reader perform the steps outlined in the document and check if it helps.

  See the following article on printing PDF troubleshooting | Acrobat, Reader products affected.
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html

  Method 3: update drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• HP Experts Attn: HP Solutions Center detects not (yet) printer (Advanced help needed)

  1. a brief, descriptive summary:

  "HP Solution Center cannot work because your device installation is not complete."

  After trying all the solutions regarding the installation of devices and software on this forum, I have not been able to solve the problem. However I think I have reduced the problem and require advice from experts on how to proceed.

  Take a step back, all I want to do is to be able to SCAN SEVERAL PAGES, perform OCR (optionally) publish/print in PDF format. If you can advise me how to do this quickly and efficiently without HP Solution Center, I would also welcome. Note the following is NOT valid suggestions because they don't allow me to scan several pages in a single PDF file.

  X Webscanner

  X import/capture to paint

  X Windows Fax & Scan

   

  2. a detailed message with the following information:

   

  Product key information:

  Printer model: HP Photosmart C4700

  Operating system (including service pack revision):

  Windows 7 Home Premium 64 - Bit version. Service Pack 1

  !!!!!!!!!!! IT FIXED!

  The solution - summarized version: do NOT click Finish when you get to this screen, you have to WAIT!

  

  It is difficult for me to explain exactly when you're ok to click on finish, but I would suggest waiting until the screen below appears.

  

  If you click on finish prior to this, the installer can start the reboot your machine before the installation is completed. The result is that you end up with missing entries in your registry and the Solution Center may not recognize your device.

  For the more geeky of you, take a look in Manager Perfmance of Windows and check that there is no installation still running process - in the 'Disc' tab, they will start with "hp" for example. "Hpinstall" and others. You can open windows performance management in Windows 7 by typing "perfmon" Dowes search.

  In many other positions I've seen tech guys say "it may take several re - installed to fix the Center ect solution" but I suspect that, in reality, it's a stroke of luck that finally people are waiting until the implementation is really complete instead of click end right now.

  Anyway I hope this helps! See the next post for more tips - I can't believe it finally works!

  HP: PLS SORT ON YOUR INSTALLATION of the SOFTWARE and you must pass by this.

• HP Solution Center does not detect that I've added a second printer

  I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

  HP Solution Center recognizes my HP 2575 x, and everything works.

  But now I have an extra F4280 HP I want to add in via the USB port on the computer.

  First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

  Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

  Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

  I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

  How can I know the HP Solution Center to detect and add my new printer?

  Thank you.

  When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• Printer HP all at once be discovered

  HP LaserJet 2300 USB connected to the MacBook, on the same network internet in the Mac desktop, iPad and MacBook Air and detectable as 'Local' printer for several years.

  Suddenly, printer 'offline' to all three wi - fi devices physically connected despite being online computer connected by USB.

  Removed from the office, which is now impossible.

  Tried connecting via IP address, get the error message "unable to verify the printer on your network. Unable to connect to '(adresse IP)' due to an error. You want to create the printer?

  Under OS X El Capitan 10.11.5 Office, which I use to solve problems.

  Wanted Apple and HP forums, no help.

  All suggestions greatly appreciated,

  Tracy

  Have you tried to stop the printer, then wait a few minutes and then turn the printer on?

• Toshiba e-Studio 167: printing documents ODT LibreOffice 4 Linux problem

  Hello

  I'm trying to solve a problem when I try to print some documents ODT of LibreOffice 4 (13.04 Ubuntu operating system) on a Toshiba e-Studio 167 printer.

  I have not received any response from my service technical so I hope someone can help me here.

  When the document contains fonts as liberation, liberation Serif, etc., I get a printed page with the following error:

  ERROR:
  invalidfont
  THE OFFENDING COMMAND
  $definefont
  BATTERY:
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  WASRNP + LiberationSerif
  --nostringval--
  --nostringval--
  17

  However, if export ODT file in PDF format and print PDF files or if I print another PDF Acrobat file, it is not a problem. It works too, if I print a document Word (doc) opened to LibreOffice (usually with a Times New Roman font); in this case, LibreOffice indicates that the document has Times New Roman font, although it is not installed on the system, at least I can't see fonts in the drop-down list. In these cases, that the document prints well, but the new ODT documents with fonts system fail, what happens?

  If I print in a local printer (HP Laserjet 1020), he has no problem with any document.

  I tried to apply the solution given in the son, but if I change the type of PostScript printer language, I get the same error:
  https://AskUbuntu.com/questions/69014/unable-to-print-from-LibreOffice
  https://AskUbuntu.com/questions/68909/problem-printing-in-LibreOffice-writer-but-not-in-Adobe-Acrobat-Reader-or-Evolut

  This is how I installed the printer driver:

  https://localhost:631
  Administration-> "Add printer".
  The wizard has automatically detected the network printer: Toshiba e-Studio 167 Foomatic / Postscript (en)

  This site says that the printer works under linux:
  https://www.OpenPrinting.org/printer/Toshiba/Toshiba-e-Studio_167

  Any help would be apreciated.

  Thanks in advance
  Juan José Alonso

  News about your problem?

  I found this page from Toshiba on e-STUDIO167
  http://business.Toshiba.com/USA/product/multifunction/small-workgroup/e-STUDIO167.html

  This brings me to the managers for e-STUDIO167
  http://business.Toshiba.com/support/downloads.jsp?SELCTD_MODEL=e-STUDIO167&AXN=SELCTD
  Unfortunately, there is no driver official Linux so can't say for sure if this printer is compatible 100% linux.

• DesignJet T120: Is printing only part of image T120

  I try to print a 17 "by 22" TIF file from a graphics program on my T120. I print on a 24 "roll, so I put the paper size to Super C/A2, which is 18 x 24. No matter how to position the image (centered on the paper, the upper left, etc.), landscape or portrait, or whether or not I put the margins, the image is always cut the same way: with 20% of the side left the printer off and about 20% of the upper part of the image not printed. What I am doing wrong? Here is a picture of the cut (top) image and the image full (below), both are Copyright (c) 2016 two generals games. :

  

  Hello

  If the image is in fact 17 x 22 you can use paper ARK C size.

  Make sure that the coding is clean and check the detected by the printer paper size

• HP Envy 5660: KP want 5660 will not print envelopes

  I just started to try orint envelopes, but my printer HP Envy 5660 of four months will not be printed #10 or other envelopes.   Machine prints letter size and scans OK but no joy with envelopes.  The value wraps #10 and the loaded paper envelopes.  printer starts to take the envelope then freezes with a "thud" sound and displays the following error message:

  Paper size difference «»

  Detected by the printer paper size does not match the selected paper size. »

  I re-downloaded and installed the latest version of the HP 5660 software, still no joy, as above.

  Very frustrating!   Should I have a defective printer?

  I thought about it!  HP will be happy to lnow that the problem was not with the printer HP 5660.  It is with my need to learn how to configure Word 2003 to print envelopes with this printer.  After several visits to help offline in Word 2003 is included on my machine, I have found how non-intuitive to envelopes that run with the 5660.  It evolves your envelope and the graphics setting in tools/Word/letters and direct mail/envelopes and labels/add to the document and then saving them as a Word (.doc) document.  Then, to get the envelope to print, load the envelopes into the printer, then press file/print and then (totally intuitive) configured to print the "current page" or page # 0.  For successive envelopes, you edit the address if necessary in the Word document and then file / print... again.   It seems to work like a charm!

• Why my Mac under Lion does not detect my HP Deskjet 3050?

  Product: HP Deskjet 3050 CH376

  I got my printer works perfectly for like a year on my Mac, which runs on Lion.

  I never even had to use the CD or anything like that. So the other day I tried to set up wireless.

  I put the CD in and it said that the CD was outdated for my operating system, and that I should install the latest version of the software.

  I installed the drivers and software current, but then my computer could not detect even my printer, even through the USB connection.

  I uninstalled the software and then reinstalled.

  It seems fitting that my Mac cannot detect my printer.

  Help, please

  OK, more ideas:

  1. connect your printer directly to your Mac, not to a USB hub.

  2. check if your Mac sees the material:

  -go to the Apple menu, hold down the Option key, and then choose system information

  -Click on USB on the left side.

  -Is it your printer appear as being recognized by the hardware?