My Dell all-in-one printer does not print from the new hard drive installed

Similar Questions

• SMU 8108 does not start with the new hard drive

  Hello

  I am currently using SMU 8108 with SMU-1062 q.

  The previous record was borken, so I had to install a new hard drive.

  The new hard drive is fommatted as NTFS format, and it is currently mounted on 8108.

  Unfortunately, I don't have recovery disk available to the general public so I am trying to install Windows 7 on a blank hard drive.

  When you start, the LED OK PWK light is all the time, orange DRIVE LED turns on for a few seconds only when I turn on the switch.

  LabVIEW RT switches are all off, I cleared CMOS several times to the Board of Directors, but the screen does not show anything.

  I tried to use my DVI monitor with any other device as well, and it worked, so there is no problem with the monitor.

  In addition, I tried to go in window safe mode by pressing F8 or Del it didn't work, so I can't see anything on the screen when his kick upward.

  I tried to put a lot of information I can it will be very appreciated if you can help me with this problem please.

  You said that you can't in Windows safe mode, you have installed Windows on the hard drive?  Are you able to get into the BIOS of the controller?

  If you are not able to access the BIOS for the controller, it may be due to bad RAM.  If you are uncomfortable installing RAM and you have a few extra laptop RAM of the same type (I think it's the DDR3 for your controller) laying around, you can try to replace the RAM.

  Was your hard drive damaged through certain events, or it just stop working?

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Satellite L30: CD player does not work with the new HARD drive

  Hello

  Just bought a new drive to HARD drive of 250 GB to transform my L30-115 has a home server.

  My problem is when both the new HARD disk drive DVD/CD-RW drive of origin are inserted into L30, the computer crashes and I can not even get into the BIOS (I have the latest edition).

  However, when I disconnect the CD player, system boots fine in a system of operating "plain" (command-line only) - BIOS recognizes very well and everything is fine. Idem: as I disconnect the HARD drive and connect the CD player, I am able to work (for example with a live linux system).

  The question is: * how to install a Windows operating system to a new HARD disk drive *? There is no option to boot from USB. What else can we do? I'm not going to invest more money into this old machine. I would like to install the Windows Home Server in there. There is no need to use the CD player later (all other operations will be performed by the network).

  Person not answering, so I'll do it.

  I was able to boot from USB external floppy drive, so the solution is to boot from external CD drive and install the system.

  It is not an exact solution, because the internal optical drive must be removed, so I'm looking forward to see updates to the BIOS level or other solutions for Toshiba.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• DV9810us not to recognize the new HARD drive?

  Hello

  I tried recently update my HARD since the 160 GB drive it is initially supplied with due to disk failure. I installed the new HARD drive (a 160 GB, 1.5 GB/S 5400 RPM WD Scorpio Blue) and when I go to start the computer, it will display the HP logo and options before going off after less than 5 seconds. It restarts then 3 more times, before loading any bootable media that I inserted. Right now, I have an external HARD drive that I am running Ubuntu off the coast of so I can at least use the computer at the moment.

  At the BIOS screen, I'm going under Drive Diagnostics and it says IDE Device not found. I find this strange being the wrong drive I took out the laptop SATA. I inserted my Vista Ultimatex64 7 disc and when he asks an installation location, it says not found hard drives.

  The new drive is not dead either, I have hooked up to my desktop via a port SATA extra and is easily recognizable.

  You use the same drive connector in a cage and at the end of the old drive?  I saw where a new drive connector seems to be the same, but they do not work.

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• Windows 8 - recovery disks do not work with the new hard drive

  My HDD had major errors of io only 1 month laptop warranty. I can't clone the original disc, its dead. I'm relatively new to Win8 but I bought the factory HP recovery disks for my model and have tried repeatedly to restore the OS win8 without success even after support technical advice ofHP and several friends with more experience than me (and I got an A + cert for more than a decade)-I have no idea why he keeps fails. I ordered another set of discs and tried another new hard drive. The log shows all the hardware in the way and a sysprep not found error at the end. What Miss me?

  Problem solved! After another half-dozen recovery more attempts and lose more money on a new HP certified hard drive with the correct part number, I decided to give up Windows 8 and turn this laptop in a Hackintosh, I now on Mac OS X!  Microsoft has gone too far now, only not with the security of windows, instead of trying to make sure they get every penny they can from each PC running windows. His self defeat really. Those who cannot or do not want to pay the cost will simply find an alternative. I'm just tired of the headaches and of constantly having to spend my precious time proving that I have a valid OS license for every computer that I've updated or repair. Forcing people to buy the same item several times is aggravating and false. Sorry, just fan frustration.

• Laptop running Windows 7 does not start if the external hard drive is connected

  I know what is already on a thread, but here it is again (i.e. thread became uncontrollable anyway and did not offer me solutions). I have an ASUS K53S laptop computer Series and use it as a desktop PC. It sits on my desk and never move, I plugged my larger screen, a keyboard and mouse, printer and external hard drive that I keep all my information on i rarely save to local disk. These things represent more than ports USB to the laptop, I have a hub 4 ports on there also. It is just background information; I mean, the laptop is a must.

  Here's the problem: when I start, as I do every morning, I used to see ASUS inspire Innovation - first of all, persistent Perfection for about 1 second, then the laptop will just get on the job and complete its start-up in about a minute (including login). Which was very good until a few days ago when things started slows down a bit, then I rebooted as I always used to with my Windows XP tour. All closed but return is reactivated and it hung on the opening screen of ASUS and show no signs of getting further. I went outside and continued on another work that does not need a computer, thinking that if I ignored it it would be bit go further, but I came back hours later to find that it is always locked.
  Well after a little, I took the plug my external hard drive, and he continued to start where he left off, like nothing had happened.
  This settled this possibility, but before that, I had established a thing; I need to connect my external hard drive before starting, otherwise it wouldn't connect properly.
  When I managed to finally get both going at the same time (Yes, after some persistence, he recognized the drive but I still would like a solution to this when it exists), I looked at the hard drive and all my files are corrupted or something. photos are not valid, some files that I know to have files in appear them as empty and I can't make any sense at all. Is there someone out there who has had this problem before and fixed, and if so, how?
  My external hard drive is a Seagate 1 TB, if it helps.
  I really want an answer to this, I have data on that disc that I need and I'm not.

  If the problem affects only one PC it says its something specific to this PC.

  Is there traces of yellow warning in Device Manager?

  At whatever it is updated / installed on this PC before this problem, or run a maintenance utility?

  If there is no warning of the Device Manager, then if you perform a clean boot PC http://support.microsoft.com/kb/331796 NB this isn't the manual method the Fixit which helps?

• Operating system does not load unless the 2nd hard drive is in.

  I have 2 installations of windows 8 (one in each of my 2 hard drives). The hard drive is almost broken, but it seems that if I unplug it I won't get a screen asking me which operating system to load from. I want it so I have 1 hard disk whereas my os works can start. How to do this?

  Looks like all the boot information on the main active hard drive. If this drive is not available, then the other operating system is not available. Reconnect the drive which can boot into Windows 8 and create recovery media that allows you to recover the drive which is not booting:

  create a repair disk:

  http://winsupersite.com/article/Windows8/Windows-8-tip-create-recovery-media-144098

  Boot from the recovery media that you create.

  (a) in the screen install now

  (b) click on repair your computer

• L855-135 satellite display brightness does not work using the new ATI driver

  Hello

  I just bought the L855-135 with a Radeon HD 7670 M and wanted to update the graphic with map
  the last driver AMD. After that, I realized that the brightness setting didn t work anmore. So I uninstalled
  the new driver and installed again the old driver from this site. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver. Its around the age of 8 months. Before I bought my laptop I've never heard their update policity. Can someone tell me when they intend to update their-own-amd-drivers toshiba? I really want some new drivers but I Don t want to lose the ability to adjust the brightness. For me, it's a reason to give the laptop back, but I like really this laptop with the exception of its own pilots.

  Can someone tell me how long it will take to get a few new drivers? And I mean not more recent that the 'old' but still 6 months of NEW drivers.

  Thank you.

  > After I realized that the didn t of brightness adjustment works more. So I uninstalled the new driver and installed the old driver from this site again. Now, the brightness setting works fine again but I Don t really want to get stuck on this older version of the driver.

  I found another thread on the same topic.
  It seems that the command buttons FN brightness don t work using the NON-Toshiba graphics card driver.

  You know this Toshiba page graphics card driver is a driver updated, created and configured especially for models of Toshiba laptops.
  This driver supports protection against overheating. Other drivers don t

  However, it seems that there is no other solution than to use the Toshiba configured and modified drivers.

• Tecra P4 not to recognize the new HARD drive

  Hi all

  I have a Tecra P4 - PTS40A-02100V, which does not recognize the new drive of 80 GB Hitachi (HTS541080G9SA00). The laptop is out of warranty and replacement drive was purchased. This is the second new floppy disk that the supplier sent me. The provider is an official supplier of Toshiba in Australia. Customer paid ~ $400AUD to the drive, if that could be a costly exercise.

  I am able to get a vanilla Toshiba restore to work on the PC, but our organization uses WinPE based boot environment PXE for the kickoff of image and the version of Windows XP. It is not possible to use a generic Windows XP in our environment.

  DiskPart in WinPE will not recognize the disc. Partition Magic and other popular applications will recognize the disc, others not. I can create an NTFS partition and format. Can create basic MBR and MFT, no chance to recognize. Also, I can use the drive in a caddy USB Windows XP on another end PC.

  This new drive appear the same questions in a known working P4. I don't see any option in the BIOS to work around the problem. I updated the BIOS to v3.20, but the result is the same.

  Clues?

  Hey Buddy,

  Just to test: is it possible to install Windows from the Toshiba Recovery disk? Have you tested this?

  And interesting to know what the authorized service provider said of this behaviour. Did you already ask guys?

• Windows 7 pro says that my activation is not valid after the new hard drive.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Cached Validation code: n/a, hr = 0xc004f012
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
  Installation ID: 006123886611989160227626608456521816115195059822524626
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 04/12/2015-18:47:01

  Windows Activation Technologies-->
  HrOffline: n/a
  HrOnline: n/a
  Beyond: n/a
  Event time stamp: n/a
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  ADELINE ALASKA A M I
  SSDT AMD POWERNOW

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid license
  Validation code: 50

  Cached Validation code: n/a, hr = 0xc004f012
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010100.0.0.048
  ID: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F4C77439-E9D9-4A51-8869-6DF8DE7E1A3A}1.9.0019.06.1.7600.2.00010100.0.0.048x 64*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-3874045902-1917670552-2236776649Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F1 20130408000000.000000 + 00003B83607018400F204090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700524-02-1033-7600.0000-3062015
  Installation ID: 006123886611989160227626608456521816115195059822524626
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 733WD
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 04/12/2015-18:47:01

  Windows Activation Technologies-->
  HrOffline: n/a
  HrOnline: n/a
  Beyond: n/a
  Event time stamp: n/a
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAACAAAAAQABAAEAHKIYJ0Au3N/cFVTyEDPUlJI5cCD0AfqjbnU =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  ADELINE ALASKA A M I
  SSDT AMD POWERNOW

  The type of key and partial media product indicates that you have used a reinstall drive (or other media) that was produced by Dell for a Dell computer.  Your motherboard reports himself can be made by Gigabyte Technology, (which would not arise a Dell system).  The BIOS does not have the required for activation OEM SLIC input.

  You must change the key non - SLP product key, as in a detail (product complete package), selling retail or OEM system builder version of Windows 7 upgrade.  for example the COA/sticky label that came with the computer or the installation media of Windows 7 and then try to activate online or by phone.

  If you used a modded BIOS of third party who attempted to add the string SLIC 2.1 for a motherboard that is not made by a royalty OEM (which Microsoft believes that a form of hacking), then the BIOS mod has not done correctly.

• CS3 will not activate on the new hard drive after the failure of an old man.

  I had a hard drive fail on my Mac and got a new. The operating system before and after were OS 10.10 (Yosemite). I reinstalled CS3 and entered my serial number. It does not accept as a correct serial number. I sent support of Adobe. They said: Yes, it is the correct serial number. I asked what I could do, they said "Try the Forums." So here I am.

  The problem is probably that CS3 is not really supported in Yosemite.

  What others have experienced, is that If CS3 is already on the computer, you can continue to function, even if you have updated to Yosemite. But many have had problems installing CS3.

  Because CS3 is old and is not officially supported you unfortunately are on your own.