My desktop computer shows that it is connected to the network. However I can not access the detained.

Similar Questions

• My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again?

  Why my internet has stopped working

  My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.

  http://support.Microsoft.com/kb/321448

  http://support.Microsoft.com/kb/311766
  In some cases, you must remove the cookie as well.

• HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

  My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

  Hi @Janilynn,

  Welcome to the HP Forums!

  I read your post and wanted to help.

  I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

  I would like to know if it solved the problem or gives you an error message.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Computer shows as connected... but we can not access the internet.

  Original title: but alas... internet no.

  Recently, we had this problem where our shows as connected pc... but we can not access the internet.  What I've been able to solve, is that somehow my IP settings change.

  I'm going to "Obtain an IP address automatically" and "Obtain DNS server address automatically", but of course... when the problem occurs again I find that my "Obtain DNS server automatically an address" has been changed to "use the following DNS server address".

  What is causing my computer to change my settings?

  I think you're DIY too.  Normally, your computer and your wireless router assign dynamic IP addresses, and they change periodically - that is part of the security design.

  In your case, the DNS server is the router.

  Most of the time what you describe is your computer is able to find a wireless router but the router doesn't send an IP (its normal function).

  This is usually:

  1. Your Internet service provider is down or your connection to it is broken.  If this is the case there is nothing you can do about it.
  2. Your computer network security key does not match the one in the router.

  1 reset the modem & router.  Follow these instructions precisely: http://canadiantech.info/?page_id=136

  2. If that does not resolve the problem, you must remove this network from your list of networks to manage Windows 7.  Then try to connect again using the network key, you know.

  3. If this does not work, you will need to do a factory reset on the router and re - install the router according to the router set up instructions.

  4. If after all the above does not correct the problem, you must replace your router.

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Smartphones from blackBerry Desktop Manager will not show that I am connected

  My "BOLD" will connect to my Vista computer via a USB port. I can copy files if I do it myself. Blackberry Device Manager shows that I am connected to my computer. The Desktop Manager program does not show that I am connected. It says I am disconnected. I am the administrator of the computer. I loaded the program using the option "Run as Administrator" enabled. It's very frustrating! Please help me.

  Thank you

  I got it! I had installed the program Microsoft parental control on my computer and things seem to start down. I uninstalled the program, and everything seems to be working again!

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• My wireless connection status shows that I am connected but I did "no internet access.

  Original title: internet connected but shows "no internet access" why?

  I have a gateway laptop and everything suddenly I can't access the internet.  My wireless connections shows that I am connected but I did "no internet access?  I tried to disconnect and reconnect, but that has not worked.  I tried troubleshooting and it says there is a problem connecting with my modem, but it is impossible because all other computers cell phones/Ipod work correctly on the same connection.  Can anyone help?

  Renee

  Hello

  You did changes to the computer before the show?

  I suggest you follow these methods and check.

  Method 1: Remove all the wireless networks, listed in the network and sharing Center.

  1. click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer.

  Select your wireless network and connect (if course, enter your password). Check if you see exclamation of yellow color on the bar strength wireless connection.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the following link.

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If the method above does not work, proceed to the next method.

   
  Method 3: Reset the TCP/IP stack.
  
  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
  If the same problem still persists, then try the next method.

  Method 4: Perform the steps from the link to set up a new wireless connection.

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

• I can connect only partially. The sign continued to show and I can't activate the mobile link. On the Help menu, it shows that I am connected.

  I can connect only partially. The sign continued to show and I can't activate the mobile link. On the Help menu, it shows that I am connected. Adobe has support people or only computer guessed help?

  Download, installation, setting up for the Installation of Acrobat & day out>

• even if the computer shows that I want to print right, the printer prints in large characters

  even if the computer shows that I want to print correctly, the printer prints in large characters

  My test print of this preview page came out ok.  I'll try to print this as what I was trying to print before.  I'll let you know what happens.

• Why after 6 months not my new desktop computer says that the operating system is not authentic, alan

  Why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason it is now not an authentic version of windows.can you help me with this little problem as a failure more has turned up, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  alanandmovita wrote: why after 6 months my new desktop computer, says that the operating system is not authentic, I bought my computer from currys/pc world about 6 months ago and had no problems until that in one of the i.e.microsoft of updates to microsoft essentials installed without my permission and then maybe 2 weeks after for some reason any , now is not a genuine version of windows.can you help me with this little problem such as a power outage more has turned upward, when I try and open messinger live there now is a missing file up to now no messinger called, wlidcli.dll unless I go via google.alan

  Hello alanandmovita, you could try to return to a Windows Restore Point before your latest Microsoft updates where you mentioned that he installed Essentials without your permission.

  Go to the start ORB, all programs, accessories, System Tools, System Restore, and look for a date before the updates were installed.

  There is a reason, that I never use automatic updates. Windows updates all that Microsoft feels that they want that you want or need or not.

  Just some thoughts.

• my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  my widget browser continues to feed widget showing 'failed' and keeps saying ' failure widget feed and be sure that you are connected to the internet "when I'm connected to the internet. How can I fix it?

  Widget Browser disappeared.  Adobe pulled the plug on this subject quite earlier.

  See that this related discussion from earlier today.

  Widgets a go go

  Nancy O.

• Windows 7 networking; WiFi says that I'm connected to my network of old.

  Then the other day, I upgraded my home router. After you have connected several times, I noticed something weird:

  

  The same thing is revealed in the network and sharing Center. It shows that I am connected to my old router.

  Maybe Windows 7's in denial?

  I tried:

  -Relaunch "explorer.exe".

  -Restart the whole computer itself.

  -Reset of the card.

  -Troubleshooting the WiFi card. (With the help of the Windows troubleshooting tool)

  -Disconnect and reconnect the router.

  -Finally, I even made sure to stop the other router and change its name completely so that it would not glitch 'thing of networks' with each other.

  It starts to bother me how I can't fix a such simple glitch, do you know any fix guys?

  After hours of clicking on I discovered that if you go to the "networking and sharing Center" and click on the network connection icon opens a dialog box that allows you to change the name of the network.

  Thank you very much for your help Mr.Harkanwa.

• I need driver o lightroom, mas appears aviso dizendo that only through making cloud creative desktop. Appears nao ELE no meu computado. JA instalei several times, I can not access creative o mas para aturalizar o lightroon. 8.1 Windows 64 bit

  I need driver o lightroom, mas appears aviso dizendo that only through making cloud creative desktop. ELE nao appears no meu computador. JA instalei several times, I can not access creative o mas para o lightroon driver. Tenho o 8.1 Windows 64 bit. Creating funcionava direito e o icon not dele mill no canto e agora nao tem but Office. Acho a wave o programa Creative cloud, clico e la nada esta pasta. O programa não abre. Alguem pode me help?

  Jeff,

  Lighrroom 6 is not a free upgrade from older versions of the software constantly, but rather can be purchased here: link to the purchase of Adobe products .

  Scroll to lightroom and click 'buy '. Click on the text selectable by "I want: 'and select 'upgrade'."

  However, since you have the CC photography plan, you should be able to download and install Lightroom CC 2015 on the site of creative cloud.

  Since Lightroom CC is a new product, it will not show as an update in Adobe Application Manager.

  Instead, press the button install next to Lightroom in the Application Manager.

  If you do not see 'install' by Lightroom in the application manager, please first try to log out and return to: connect and disconnect from the creative cloud desktop application

  If you still have questions, see option 2 in this link: Lightroom does not start or stops automatically after the splash screen

  Guinot

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.