My disappointing experience with the Lenovo Ideapad A1 Tablet

Similar Questions

• My disappointing experiences with the iPhone 6

  After 11 months of owning an iPhone of 128GB 6 + the screen started to flicker, a gray bar would flash at the top of the screen and the touch screen has been insensitive.  This was due at random intervals.  I restarted the phone and the problem persisted.  I backed up my data and reset the phone like new.   The problem persisted.  I had my first appointment at the Genius Bar. He went a lot; I was leaving in 15 minutes with a new phone (my first replacement).

  I came home and restored my backup, and after a day, the problem came immediately.  Again, I have reset the phone again, and the problem persisted.  I did another (second) meeting with the Genius Bar (four days after the first).  My genius was excellent.  He had seen that problem before; He showed me that if he put a little pressure on the phone, the screen will become sensitive while he kept up the pressure. He took the phone and showed some of the other Geniuse the problem and how do I get the screen to become sensitive.  He assured so was completely related material and I was just out of luck and that it had nothing to do with my backup.  He asked me to contact Apple, since it is a problem he could see quite often with these phones.  In the end, I got another new phone (my second replacement).

  Once I got home I restored my backup once more.  And yet once again, the problem came back.  At this point, I was getting angry.  I have two young children (under 3) to home and make those appointments around their program is difficult.  Back to the apple store! This time, it was a little harder to get a solution. Engineering had to obtain the approval of the Manager and then he could not find the replacement phones and all the experience took a lot more time then my two previous trips.  In the end, I got another new phone (my third replacement).

  Yet once, I asked if this might be the result of my backup, and even once, I was told no.  I expressed that it becomes ridiculous and controlling common only I see is the backup. He suggested trying the phone for a few weeks without food and restaurant then. I never restored and just started over again.  The phone has been flawless until today, it lasted 38 days.

  The problem came out of the blue.  I have not installed anything new, nothing extraordinary happens today.  The screen started to Flash, returned the gray bar, and the screen becomes unresponsive.  The first Genius Bar appointment I can do is in 2 days.

  In short, in the space of 10 days, I've had four different iPhone + 6s fail in exactly the same way.  My family uses exclusively apple devices.  I had an iPhone 3s, 4S and now 6 +.  My wife had iPhone 3, 5 and 6.  We have all two Ipads and I an Apple Watch for Christmas.  We have had excellent experience with our devices.  I am more unhappy with the iPhone + 6s.  I have about a year left before I can go again, so I'm stuck with what is becoming a useless device.

  I have seen others with the same issues, but no solution is permanent.  This issue should be fixed.  I'm afraid that my next replacement will last 90 days and then I will be paying $329 for a replacement which is likely to fail again.

  What is your technical support question that we, your fellow users can answer?

• Cannot connect the Lenovo Ideapad A2109 tablet to the PC via USB cable

  PC does not recognize my Lenovo Ideapad A2109 when connecting using the USB factory. Y at - it another option available to connect with success? Where can I get the drivers from?

  See here.

• Experience with the service coverage in Bulgaria

  Hello

  I am one of the sysadmins of a large international company, which has offices in Sofia. Bulgaria.
  I would like to share my experience with the Toshiba products and service coverage in Bulgaria.

  Months ago, we bought an external USB hard drive - STORE. E PARTNER 2.5 500 GB USB 3.0 P/N PA427E-1HE0. After you have deployed the HARD drive, I noticed that the computer constantly loses / restores the connection to the external drive.

  As I have suggested that the cable is not inserted properly, I just pulled the cable to the USB connector to check that it fits fully into the socket. To my surprise the just USB connector broke and fell inside the HARD drive chassis. In my opinion, this is a factory default, a badly welded connector.

  We talked to the service allowed in Bulgaria: STEMO and they sent the disc with a protocol that it is a physical damage that violates the terms of warranty service.
  I can't imagine a way to prove in this case that we have not jumped on this HARD drive and that's the way it came from the box... We went to buy Hitachi after this case, and I can say that we had not a single complaint of users or technical staff.

  I would like to say that it was really a bad surprise for me that a multinational company could offer this customer service the poor in Bulgaria, especially given a STEMO dealer who are so famous here for their complete lack of quality of service and poor standards.

  This will avoid for sure choose me no matter what other Toshiba products in the future.
  Thank you.

  Sorry to hear about this. It is very unfortunate to have such an experience with the authorized service provider but I n t think that such a negative experience such influence negative on you.
  One issue doesn't mean Toshiba products are bad.

  You know very well that Toshiba is one of the largest companies for HER and material production in general. A few production errors can happen to anyone.

  Problem is that many people don t care much material and very often some hardware components can be damaged very easily. Can you imagine how much money Toshiba or any other hardware manufacturer will fix these issues where everybody says it's lack of production?

  On a path, I can understand you, but otherwise I can understand Toshiba to be skeptical about these mechanical defects. You as an expert in computer SCIENCE know these issues. Can you imagine how you will react when you give your new notebook your co-worker and a few weeks later it brings you with broken keyboard? I don t think you will accept his argument on construction of bad keyboard.

  You know that's not easy to discuss these issues.
  In any case, thank you for your ad. This forum is the right place where people can exchange experiences and opinions.

  Good luck

• Someone at - it experience with the Sony HXR NX5u (or p)

  Hi all

  Was wondering if anyone had any experience with the Sony HXR NX5u or P?

  We'll get a little time, and it would be good to know how the workflow was. We "re on CS5 on a new system, built for speed and seems to treat the other cameras without problems AVCHD video.

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Any info appreciated

  Thank you

  As it is AVCHD, I guess that timecode number was not "fixed" again, but it would be good to know if it there first with this camera-specific features.

  Not necessarily; read here. Looks like you're good if you follow the rules

• Problem with the Lenovo Z510 battery indicator

  I have an old Ideapad of one year z510. Last week, the battery indicator began to stuck on 100%. So not connected, he stops suddenly without notifying me with 10% and 7% remaining notification. I tried to uninstall the Microsoft ACPI control method battery compatible from the Device Manager but no change... Anyone has an idea what should I do otherwise.

  Thank you
  Ahmed

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Resolution of the Lenovo Ideapad S10e

  Hello

  I want to change my resolution of Lenovo Ideapad S10e. She was set to 1024 x 576 pixels.

  Can anyone advice me on this? or this parameter is fixed!

  Answer me as soon as possible.

  Hi and welcome to lenovo forum

  .. You can spend in virtual XP more big screen... the screen itself has physical resolution to 1024 x 576, but you can move the entire desktop inside this limitation...

  Read here how to...

  > 1024 x 576 resolution / 600  Only works with XP

  cordially KalvinKlein

  ------------------------------------------------------------------------------------------------------

  You want more? For more information to get the most out of your machine S-Class

  Establishment of Lenovo

  Backup

  Driver Windows 7

  Windows 7 Install

  Clean install of XP

  Starting XP

  Guide to WebCam

  Lenovo easy Capture

  > 1024 x 576 resolution / 600  Only works with XP

• Experience with the connectivity of the laptop

  Hello

  someone that also has experience with a laptop at CTS-3000 or CTS-1300-65 of sharing data connection?

  With my (and my colleagues) HP or Dell laptop business, we need to make the switch to the external VGA twice to get the correct resolution of 1028 x 768. I ask all the other external projectors etc. because it works well.

  So what are your experiences? On my site to view it looks like a small problem with the systems of TP - perhaps.

  Thank you

  Tino

  I will suggest you to open a TAC case with us so that we can confirm that your Codec level and mobile chipset are affected by this problem that I mentioned before.

  Thank you

• (Redirected) My experience with the Service the customer of Dell and Dell has been and is still awful

  The Dell customer service is by far the worst service I've ever had to deal with dissatisfaction. After two weeks of owning my computer desk dell, the hard drive failed, when I talked to technicians from that day, that I wasn't even upset considering I was under warranty and I knew that my computer would be fixed for free. I was told that a tech would quote me the next day to put up once for what it Vienna repair the computer. Surprisingly enough has actually happened, only when he called me he was somewhere in Arizona and I live in New-Mexico. After having missed all my college classes and have to reconsider work waiting for technology to arrive, only to be told that my address has been updated completely wrong. After 4 hours on the phone with the Manager after Manager, I was finally told that I have would be by corporate overnight to express my disapproval of their customer service.  Of course but one of the managers that I had spoken previously tried to contact me when I had specific said that I would be unavailable. But the call, which was supposed to come from the company has never even updated in my case, I discovered later when I called. After an hour on the phone with dell today absolutely nothing had been done to solve any kind of error on their part Ive heard I'm sorry for that, so many times of technicians that it is hard-wired into my brain at this point. But I don't want to hear someone halfway across the world tell me sorry and then take little action to solve the problem. If I could have my way, I would like to receive a full refund and buy a different brand outside of dell. If away from my experience with their products, I am not too impressed (given my hard drive couldn't do more than a month of use). When it comes to their "customer service", I have absolutely no faith that if ever they will do what they should do to not to lose a customer. If you are considering buying one of their products I can't EMPHASIZE enough that you will regret when it malfunctions. All I really wanted them to understand was that they made a mistake with my address, which should have been corrected with a work around my schedule to have my computer fixed. But also the fact that every single representative I talked to just kept sending me in a circle, saying: oh you need to contact someone else, we have to call them you or there is nothing we can do. So, I say with certainty of one hundred percent that dell customer service is the worst I have ever encountered. I'm sure that nine times out of ten these issues won't happen, but he did it for me and none of the programs of care for the customer to dell had nothing to say that it was to the advantage of clients after continuous errors on their part.  A less costumer in the long term of dell.

  Better to post this thread in the Customer Care Forum here:

  http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

  Bev.

• Experience with the Canon 17-120mm lens?

  Someone had the opportunity to use the 17-120mm lens Canon yet? I think to make the 19-90mm Cabrio, but it would be useful to get some info about the gun before I pull the trigger.

  I briefly tried a Cabrio my F5 and the Vocas, the balance very well felt plate; best with a lighter is the goal and the handful of servo was very uncomfortable.

  Thank you
  Fergus

  I have the Cabrio and love it.

  Have you tried scanning Center with the cabrio to get you more length?

  Understand that there are on a ramp of 1 stop around 90 mm on the new Canon.

  Thank you

  RickThompson

• Problem with the Lenovo Z575 VGA drivers

  Hi guys,.

  As you probably know, driver VGA for this laptop is a bit outdated. I have a problem with Rage. It crashes after a few minutes of play. I guess that it also works with the only Integrated GPU because there are differences in performance between the modes 'High Performance' and 'Save energy' in the ATI drivers.

  So I decided to install the new version of Catalyst 12.6 beta which has full support for mobile and swichable graphics. Alfer, Rage finallny works like a charm - no falls down and inprovement of great performance, but the BONE started to freeze and crash. Also other games began to work more bad. On official catalyst 12.4 site AMD form is identical on 12.6 beta.

  And the strangest thing is that my friend has the Asus laptop with the same features of the CPU and GPU, and he has not had problems using the latest drivers form AMD site.

  If you have any sugestions how to solve that or what is going on, please help me

  OK, I solved the problem. Just had to uninstall Amd accelerated video transcoding device and now all works well on catalyst 12.4 in the site of AMD.

• Problem with my Lenovo Ideapad Flex 15 touchscreen driver

  Nice day!

  I'm having a problem with my Flex 15 touchscreen. I can't use the touch more. I tried to check the Device Manager, but found no driver installed touchscreen. I had this problem when I have not used/turned on my laptop for almost weeks of towing. I've already tried some I read on the forums, but the results were the same. I still can't use my touch screen properties. What should I do? Thank you for your response. My laptop was running windows 8.

  Hello Ronald.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. The issue has started happening recently?
  2. You did it any significant hardware or change software on the computer before this problem?

  This problem occurs when there is that no updated drivers are there for the material. As you have tried most troubleshooting including reset, I suggest you try to install the updated for touchscreen drivers and chipset drivers and check if it helps.

  Method 1:

  Uninstall and reinstall the driver for Interface devices and check the issue. 

  Follow the steps below to uninstall the drivers.

  1. Press the Windows key + X , and then select Device Manager.
  2. You can search for Devices of Interface and expand it.
  3. Right-click on the Devices of Interface and select Uninstall.
  4. Restart your computer. Windows will install the generic drives after reboot.

  Look for the question, if it persists the passage to the next method.

  Method 2:

  Uninstall and reinstall the chipset drivers and display drivers.

  Follow the steps in method 1 to uninstall display drivers and chipset drivers but it does not restart, you need to download the driver from the link below.

  Drivers and software - Flex laptop computer 15 (IdeaPad)

  In addition, you can also view responses 'marked' in the following thread:

  Touch screen not working not not - Windows 8 - Lenovo Flex 15

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• My experience with the Satellite X 200

  Hello world

  For those of you who have decided to upgrade your X 200 laptop, here is a tip from experience.

  1 - upgrade your stock 2 GB to 4 GB RAM. I bought my 4 GB on Ebay for 57 euros.
  You will notice a REAL increase in the speed of your system. Especially if you are dealing with large pictures or video, as I do.
  Windows Vista doesn't recognize only 3 GB of Ram, but the rest of 1 GB will be reserved for your graphics card. You will notice a much better chart performance as I did. No jumps of image and the more fluid images using big resolutions and heavy parameters.

  2. don't spend your money upgrading your 4,200 RPM HDD for a 7,200 unless you REALLY need.
  My computer came with a 300 GB 4,200 RPM HARD drive. I installed a 100 Gb 7,200 RPM Seagate Momentus and have not found a dramatic speed increase, so returned to large size disk.

  See you soon,.
  André Antunes

  X 200 - 1AA
  T7700 2, 4 GHz CPU
  4 GB DDR2
  300 GB 4,200 RPM HARD drive
  8700 GT graphics card.

  Hi André

  Thanks for these tips. I really appreciate it.

  Just a small comment about point 1.

  As far as I know Vista recognizes only the 3 GB of RAM due to the limitation of the 32 bit OS. But Microsoft has released a version of Vista SP1 beta.
  This is a beta and not fully tested version, but it should solve the problem with 3 GB of RAM. After the SP1 installation Vista should recognize 4 GB.

  Best regards

• My first experience with the camera

  Hello

  A few weeks ago, I bought a Moto XT720 WindMobile Canada.

  I had before a Nokia N95 (the first model - not the 8 GB)

  I bought the phone because of the feature multimedia awsome claimed.

  I compared a few shoots between my 4 years 5MPixel Nokia N95 and the XT720 8MPixel new and I'm not so happy about the change, even if the flash light Xeon is better if the LED available on N95.

  Those are my main issues

  (1) photos are missing details on the Motorola XT720

  Night mode 2) does not work

  Hope that all of us who are just software issues.

  Following this message attachments with samples taken with both phones.

  See you soon

  Marco

  Sorry pal, this phone has put an end to its life cycle of the product that there is more support for this phone

  You can simply buy one... other than motorola new

• Experience with the acquisition of digital workflow series of ADC on SPI or Microwire

  Dear Forum,

  I would like to acquire a digital stream via a connection series of two sons of an analog-digital chip such as AD7679. The device says it is compatible with SPI and Microwire to achieve protocols.

  There are screws for the manipulation of these protocols series? And can I use a card in the series M as the PXI-6289 for this?

  Thank you!

  Hi cwierzynski,

  Thanks for your post!  For your application, I highly recommend the USB-8451, designed to connect with SPI hardware.  You can program your application in LabVIEW using NOR-845 x driver, which installs several examples for you're going to get.

  

  Theoretically you could do with a unit of the M series, because they have the ability of/s digital correlated (timed by the hardware).  You will have to implement the whole of the Protocol in the software yourself.  All up packets in the shape and alignment of the data will be done by programming, as well as addressing slaves. This would, of course, the overhead costs of any program running in Windows.  If you are interested in going this route, this forum should help you get started in the right direction.