My display wrt45G up as an unknown device. No internet connection on the desktop.

Similar Questions

• Envy 15 t-j100 Select Edition: the device is not connected to the computer. Please insert the authentication device.

  Hello

  So I'm working on a LT desire that has been upgraded from Windows 8.1 to 10 recently and it is this message on the login screen "the device is not connected to the computer. Insert the authentication device. We can't identify what it means or what needs to be done to clear the screen. The user States that the fingerprints of impression of BIO sensor doesn't seem to work either. I looked in the Device Manager, and I see a Synaptics PS sensors (WBF) listed here and is properly installed. I even updated the driver of sensor ep on the support site of the desire, and we still see on the login screen.

  Y at - it no information or help to clear this message?

  We also note that the number on the keypad lock seems to be disabled during startup of windows 10 upwards. Before on windows 8.1 has been activated. Is there any setting to 10 to keep the active number lock.

  The user says if 10 can be made to work well, then we can go back to 7 or 8.

  Please notify.

  Thank you for your time.

  Seems to have been resolved in re - install the software HP Simple pass then go and reconfigure the settings. Message no longer appears on 10. User LT installed with 7 however. Best decision.

• 9.3 OS does not complete on my iPad 2 get message that device is not connected to the Internet, when it exists, a solution?

  WWhen updated my iPad 2 with OS 9.3, when I finally install, during the verification step, message, is that the device is not connected to the Internet when connected. Anyone else have the problem? All solutions?

  Sesame problem on my iPad mini I want to finish the update already

• Error: Your device is not connected to the Internet.

  Hello

  I have a dash HID - B70 model and until last week it works fine. I used about 2 weeks ago and have had on energy saving mode after that. I tried to use it again a couple of days, and when I typed on the screen the unit remained in power save screen and showed a yellow above the clock error message: "your device is not connected to the Internet. Press to reconnect. "I hit this button and the unit tried to reconnect, but will still end up back in the same error message and the screen.
  I tried to push the reset button on the device, but I still see the same black screen and the clock with the error message once it restarts. I unplugged my wireless router and managed to get the device to show me the other wireless networks, then I plugged the router back in and reconnected (device showed that the connection was successful), but then he went immediately to the error screen.
  I can't the unit to go to the home menu at all, no matter what button I push, if unfortunately I can't even reset to factory settings to avoid the problem.

  Any advice on how to fix this? I do know not why it happened because I didn't have the routers or wireless providers, nor have I added all devices on my home network.

  Thanks in advance for your help.

  
  

• On an iMac 10.8 Flash drive does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  On an iMac 10.8

  USB stick does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  This just started for no reason

  Finder > Preferences > sidebar.  Scroll down to devices.  External drives is checked?

  

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Unknown device on network adapter between the laptop and the wireless router

  I am running windows 7 64 bit on a laptop computer connected wireless to the router and internet.  The router is Linksys WRT160N connected to the internet.  The map of the network, there is a question mark device unknown between the laptop and the router.  However, I still have access to the internet.  In terms of network, if I hover over the laptop, it does not show an IP address.  It only shows the name of the computer and its MAC address.  Any help would be appreciated.

  Solved my problem.  I checked the button of the IPv6 protocol in the properties of a network connection on the laptop, and now I can see it's the IP address and the unknown device has been replaced by a switch and hub which is part of the router.   I do not uncheck the button IPV4.  I'm guessing that it is a bug in Windows 7 that you need to cut of ipV6 Protocol when you have a Win XP computer on the network if you want to see a map of own network.  As I said before, everything worked before, so this seems to be a cosmetic fix only.  I see that my shared files on the XP computer appear faster after a reboot.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• How to go from "offline" Mode when you use Firefox on an android device that is connected to the internet through Bluetooth.

  I have been using my tf300. Whenever I try to open Firefox on the Tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying 'Offline Mode '. Is there a way to switch to online mode or I am able to use the browser on a wireless signal?

  Could you clarify - are other applications can connect to the internet when you are logged in this mode?

• There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

  Hi all

  I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

  Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

  Advance thanks.

  Thank you and best regards,

  Chandhuru.M

  Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

  The title of security without thread/how do you have isolation set up wireless?

  Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

  Thank you

  Eric Moyers. : | :. : | :.

  Cisco Small Business U.S. STAC Advanced Support Engineer

  CCNA, CCNA-wireless

  866-606-1866.

  Mon - Fri 09:00 - 18:00 (UTC - 05:00)

  * Please rate the Post so other will know when an answer has been found.

• Problem with an "unknown device" having an impact on the performance of the pc

  Hello world! My name is Lorenzo, and I am currently having problems with my laptop, a HP Pavilion dv6, 64-bit laptop running Windows 7 that runs more slowly.
  At first, I thought that the problem was a malware, so I decided to follow this procedure: http://www.techsupportalert.com/content/how-know-if-your-computer-infected.htm.
  I tried TDSSKiller, Comodo cleaning Essentials, Killswitch, Malwarebytes, Hitman, Combofix then I installed Driver easy to update the drivers but it doesn't change anything.
  Even repairs Windows or Windows Fix it does not solve the problem.
  This is the message I get from Tune Up Utilities: Windows reports the "A2 Direct Access Driver Support disk" device does not work correctly.
  When I open the Device Manager and try to manually update the device it doesn't seem to work; the same thing happens if I disable it or uninstall it and restart.

  Well first, uninstall the update of the pilot program, using such will only cause problems. Drivers for your laptop are available free of charge at HP, nore if you use windows update for drivers.

  And then uninstall Tune UP utilities because it is only likely to cause other problems. Win7 contains all of the built-in tools in order to maintain the system.

  The "A2 Direct Access Support disk driver" part of Emisoft Anti-malware, you have this program installed?

  And in the future do not try to update something on that you don't know anything

• A7000: How can I make the smartphone as a USB storage device when I connect to the computer?

  When I connect the a7000 to my PC, it shows the Lenovo_Suit but I want to reach my data inside without using the MagicPlus.

  1. Plugin the USB cable
  2. pull down the notification area on your phone
  3. Select 'USB connected '.
  4. Select the media device (PSG)

  Go to your PC and you should be able to see your phone as A7000 as player in 'portable '.

• Device Manager in XP on the desktop SFF M57

  
  
  

• code 45 currently, this hardware device is not connected to the computer.

  Separated from this thread.

  WIN 7

  Same thing happened to one of several HARD drives. Replaced HARD drive and the substitution works as expected.

  Apparently the problem is the HARD drive and not the connection

  Drive HARD original also causes the message to format the drive. Something is not right.

  Greg

  Very complete. Thank you very much. I'll upload what I can.

  SOLUTION:

  I disconnected all the wires of the Mboard and cleaned all contacts and Sockets with flattened q - Tip and iso. alcohol. That cures the problem. However, a test of Seagate indicates a disk would become a problem. Cleaning tips was also on MS help pages too.

  Greg

• Smartphones blackBerry 8520 bb curve blackberry software doesn't have a software device blackberry for the device you have connected to the computer

  the last time that I update it this is in version 5, but when I click on update download update again and suddenly, it was frozen and the result when I start my bb is reload software: 507

  I read on the forums, but I can't work with this

  

  

  Hi and welcome to the Forums!

  On your PC (you cannot do this on MAC):

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  (4) If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  Do not forget to save.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!