My drawer does not open on my hp pavilion s7320 npc do I need a new disk

Similar Questions

• defective disc - drawer does not open

  I could only download a disc because the door to the drawer does not open. When I try to open I can hear sounds as it tries to open but nothing happens.

  Do you know anyway I can open it through the computer or I'll have to go back to the door fixed?

  Hello bethbradley,

  This problem may occur if the CD/DVD drive is gone bad. I suggest that you try to eject the disk using by resetting the drive. You will find a small hole in the drawer of the DVD, you can insert a PIN to reset the player. This allows you to eject the disc. If it does not, I suggest you contact the manufacturer of your computer to check if the disc is damaged.

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• CD dvd drawer does not open.

  CD dvd drawer does not open. my computer does not recognize the drive.

  The drive is probably dead. Replace it with a work known to test drive. MS - MVP - Elephant Boy computers - don't panic!

• My E: drive does not open to receive a disc. It seems to be locked up? Any ideas?

  My E drive drawer does not open to receive a disc.

  If you have tried all of the usuals, i.e. press the CD button open or right click on the drive in "computer" then press eject, (finally some anyway) most CD/DVD players have a small hole on the Panel of the real player, sort of a manual ejection.

  Push something long and thin (maybe a paperclip) to the bottom of it, and it should open. Try to do with the PC turned off initially, but Ive done with the power on.

  Just go simple and not too heavy handed.

  This gives the idea and pictures - http://www.computerhope.com/issues/ch000214.htm

• After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  "titch hill" has written in the new message: * e-mail address is removed from the privacy... *

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  You double click on an icon to open Internet Explorer?

  If so, right-click on the icon and select Properties.
  Select the shortcut tab.
  Change the value of the "run:" Maximized field
  Click on apply, then OK

  Next time that you double-click the icon, it is a maximized window will open.

• BlackBerry App Q10 does not open a few apps that I downloaded

  Nice day. Pls my blackberry Q10 does not open a few apps that I downloaded. I need help on what to do to solve this problem. Thank U

  MOD Edit: Title to be more descriptive

  What applications?

  Downloaded from where?

• HP Printer Wizard does not open in HP 3050 All In One J610 series.

  HP Printer Wizard does not open in HP 3050 All In One J610 series after installing new ink cartridges.  Uninstalled and reinstalled printer software from HP website.  Printer Wizard will not always be open.  Using Windows 7.

  I understand the Printer Wizard does not work for you. I will try to completely uninstall the software and reinstall with updated drivers.

  Click here for the drivers

  Let me know how it goes.

• The editor Lite Cinema 4 d does not open of in After Effects.

  The editor Lite Cinema 4 d does not open of in After Effects. I am able to create new files of MAXON Cinema 4 d from the file > new menu and comes from the file > export menu. I am able to use cinema 4 d effect on a layer to display a file 'c4d' next to a composition. But when I click on Edition > edit the Original option of a '.cd4' drop my mouse icon changes to "pending" for a second, as if he's going to open something, but then nothing happens.

  I'll double check the path of the cinema 4 d application Lite.
  I temporarily increased for 'control' permissions on the following folders

  • Program files (x 86) \Adobe
  • \Users\[user]\AppData\Roaming\Adobe
  • \Users\[user]\Documents\Adobe

  I am running:
  After Effects CC 13.7.1.6.
  Windows 10 PC
  Processor is Intel i7 - 4770 k @ 3.50 GHz
  16 GB OF RAM
  GeForce GTX 970

  I found a solution for anyone to live something similar: launch After Effects in as long as administrator and then C4D Lite will launch AE Edit--> Edit Original

• my CD does not open. The green light flashes but its does not

  I have a hp workstation xw4200. It had not been used since 2004. When we first turned the computer on the CD works perfectly. We even made a cd of music on it. But this computer needed some serious updates and since we have updated of pilots and other things, it did not work. The Green led comes on like its something but it does not open and it says that there is no cd inside.

  Here are a few ways to open the drawer with a CD/DVD with a stuck CD/DVD player,

  1. Open Workstation , and then search for your CD/DVD drive and right click and select eject.
  2. Get a paper clip and one end on open if you have something to dig with. Look on the front of your CD Player for a very small pin hole.

     
     Place the open end of the paperclip into the hole of a PIN and push gently but firmly keeping it perpendicular to the front of the player.

  I think you get some success on one of these methods. The last one is usually reserved for out a totally defective CD/DVD disc.

• my dvd is battery and does not open after that I tried to install a program.

  Hello

  I started to install a program on my laptop.

  The installation did not pass. And the cd is stack on the disc and does not open.

  On my computer, it does not see the drive that reports to the Conference on disarmament.

  shows that C; and f:

  Hello Arturomaduro,

  By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options.

  1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick.

  2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy.

  Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• My CD door won't open. Is there an eject button because it does not open when I press on it?

  My CD door won't open.  Is there an eject button because it does not open when I press on it?

  Yes, there is.

  Look closely at the front of the CD tray. You should see a small hole, just large enough to insert a paperclip (fixing of paper in North America).

  Apply the necessary pressure to get the drawer open enough to be able to grasp and pull...

• My Cd drive does not open

  Original title: BD - rom drive

  My Cd drive does not open. I even sent it back to the factory to get the engine replaced and it used to always open. And if it opens, it read any disk. What should I do? Can I open the player through my laptop instead of hitting the button on the outside?

  Hello Jayde,

  You can look for a tiny hole on the draw draw in which insert a paper clip to manually eject the CD player draw. Follow these steps and check if that helps.

  Step 1: Open Windows Explorer, right-click on the drive icon and choose the option to eject it. If it is ejected from your CD-ROM drive tray, button on the hard drive is faulty and it is recommended to replace the disk.

  Step 2: Also boot in the BIOS and check if you can eject the CD by pressing eject CD player if the problem persists then drive is defective.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 3: I suggest to start in safe mode and check if you are facing a similar question:

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-in/Windows-8/Windows-startup-settings-including-safe-mode

  Let us know the status of the issue after following the steps above. So that we can help you further.

• Final Cut Pro 10.2.3 does not open a library more!

  Hey! I could really use to understand this, a total mystery for help:

  This morning, I tried to open a library of Final Cut is saved on my hard drive. Last night, I worked with the library, but now it just opens up.

  It gives an error: Final Cut close unexpectedly

  It's just one that does not open it opens other libraries.

  Also, I tried to open it on another computer, but here it opens either.

  I tried Trashing FCP to the preferences Manager, made a first aid attendant, but it seems that the problem is in THE LIBRARY not in the program.

  In addition, NONE of the backups open.

  Any ideas? ;)

  Thank you!!

  Try to open the library of most recent backup.

  By default, they are stored in Final Cut backups in the folder sequences.

  Russ

• IPhone does not open messages, phone or contacts

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Tincho94 wrote:

  Does not open my iPhone 6 contacts, messages or phone, the phone crashes and returns to the home screen.

  Press and hold home/sleep set button until you see the apple logo and then release, then wait for the boot device upward.

• Preview does not open

  Preview does not open suddenly.

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to preferences.

  com.apple.Preview.LSSharedFileList.plist. bring the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

  If this does not work, perform a backup.

  Leave the preview.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder. Delete the following text. You won't find all. Restart and test.

  Containers/com.apple.Preview

  Containers/com. Apple.QuickLook.UI.Helper

  Preferences/com.apple.Preview.LSSharedFileList.plist

  Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist

  State/com.apple.Preview.savedState request registered

  Linc Davis credit for this solution.

  Overview of reset of the automatic download solution - part 3