my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

Similar Questions

• Windows Media Player-does not recognize the mpeg4 files

  My media playes does not recognize the mpeg4 files

  I recently had to re - install windows vista, after that everything works well, but when I try to read a MPEG4 file, it gives me an error message that it can't play at this time of the fine.  It plays music, mpg3 files fine... I tried to do a 'quickfix' but it didn't work.

  Hello

  I suggest you to download and install the latest pack of codec for Windows Media Player. Make a search using your favorite for more information search engine.

  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Windows Media Player does not recognize the .3gp file format

  Original title: cannot read!

  Why my Windows media player can't play 3gp format some0ne?

  Hello

  You will need a codec to play the file video .3gp. A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use the codec to play and create digital media files.

  For more information, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  I suggest you use your favorite search engine to download and install the codec for Windows Media player according to the type of file you are trying to read.

  NOTE: THIRD PARTY SOFTWARE WARNING

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Tecra M4 - DVD player does not recognize discs in Vista

  Hello

  After the installation of Vista my dvd player does not recognize discs!
  No update XP! It was a clean install of Vista.

  I found several links on the upper filter and lower registry entries this entry does not exist in my registry under the CDROM class.

  I tried the XP disk it works fine and recognizes all.
  Drivers are installed correctly no problem in Device Manager is invited.

  So I have no idea how to run it, seems to be a Vista problem

  Could someone help me? I am really frustrated to this topic

  Thanks for your help

  Maybe this helps:

  -Remove the drive from Device Manager CD/DVD.
  -Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -Reboot the laptop

  But what happens exactly? Which disks are not recognized?

• Player does not recognize that the CD or DVD is loaded

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

  Sounds like the drive has failed.  You can try to clean with a CD/DVD audio standard disk cleanup, but if it fails, then the reader should probably be replaced.

  "RoboTriumph" wrote in the new message: * e-mail address is removed from the privacy... *

  A player does not recognize that there is a disc inserted - when I try to use, it ejects and ask valid.  I tried several CD and DVD with the same answer.  I downloaded the BIOS and readers say that it works correctly.
  Can you help me please?

• Windows media player does not recognize my hard drive

  Windows media player

  Why Windows media player does not recognize my hard drive

  Hello

  1 are there any changes or updates made on the computer?

  2. do you get an error message? If Yes, what is the full and exact error message?

  I suggest to see the links and check if it helps:

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• Windows Media Player does not recognize the iPod touch.

  Windows media player does not recognize my ipod touch to sync

  Open WMP in the taskbar from top, find "Tools", scroll down to options.

  in the new window, locate the Hardware tab, add hardware.

• Windows Media Player does not recognize my Archos 5 internet tablet

  Original title: windows media player

  All of a sudden my windows media player does not recognize my Archos 5 internet tablet when I plug in the USB connection cable. I have the media player 11 and this is what is recommended. I do everything according to the book and he just keeps telling me to connect a device.

  Hello

  ·         Is the device is detected in windows Explorer (start > my computer)?

  ·         You are able to see the device in the Device Manager?

  ·         What happens when you try to connect to the device? You get the error message?

  ·         Did you try the device on another computer or another USB port and check if it works?

  ·         Remember to make changes on the computer before the show?

  I suggest you follow these methods and see if it helps:

  Method 1:

  I suggest you to uninstall and reinstall Windows Media Player 11 and check if it helps.

  http://www.Microsoft.com/download/en/details.aspx?ID=8163

   

  See: installation and removal of the drive

  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

   

  Method 2:

   

  If the device is not detected in Device Manager, or if you find any yellow exclamation try to uninstall it restarts the computer and check if that helps.

   

  How to configure devices by using Device Manager in Windows XP

  http://support.Microsoft.com/kb/307970

   

   

  Method 3:

  Also run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

   

   

  You can also check out the link below:

  http://www.ARCHOS.com/support/support_tech/FAQs/en/faq_Archos5.html?country=us&lang=en

• Windows Media Player does not recognize the device (iphone)

  I'm trying to download music from Windows Media Player on my iphone. I can get the files in the synchronization section but the Media Player does not recognize my device or seem to have a way to connect. Can anyone help?

  You will need to install iTunes. The iTunes Setup program adds drivers and services for the iPhone. That's what I do:

  1. Once iTunes is installed, it allows to import all the music in Windows Media Player.
  2. If you want to automatically download album art, you will need to register for an iTunes Store account. Otherwise, just copy the album art from Windows Media Player:
  a. at a command prompt, cd in each music folder.
  b. attrib s h AlbumArt * Large.jpg
  c. xcopy AlbumArt * %tmp% Large.jpg
  d. attrib + s + h AlbumArt * Large.jpg
  e e.. now, for each album in iTunes, right click and choose 'Get Info'. Drag & drop the corresponding JPG of %tmp% in the field "Cover Art" and click OK.
  3. connect your iPhone. Select "Manually manage music" on the screen of the iPhone.
  4. click on the icon on the left side of iTunes music. Make sure that all the music that you want to synchronize has an audit. (This is the default).
  5 Select and drag it to the icon of the iPhone.

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• computer HP laptop, 2000 does not recognize tv with a hdmi cable

  my computer hp laptop 2000 does not recognize tv with an hdmi cable.  I get the error "does not recognize any other monitor" when I try to "detect".

  I have recently upgraded to windows 8.1

  I have the graphics card AMD Radeon HD 6310

  The TV is a Phillips HD TV hotel.

  My game system works using VGA cable

  Any help would be greatly appreciated.

  Hi Ringerbell,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP 2000 and connect an external TV tuner. Here is a link to connection and external display. Here is a document onthe configuration ofyour laptop to use the monitor.

  Hope this helps you.

  Thank you.

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• 6 Lightroom does not recognize the raw files of Nikon D800

  I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera.  I've updated the LR software to 6.1.1 yet still cannot import files.

  Can you help me

  Thank you

  Ruben

  The D800 has been supported since Lightroom 4.1.

  You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.

  Try to download a version update of Nikon. Or use a different card for example reader method.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)