my dvd player reads all movies what do I do to get it working.

my dvd player reads all movies what do I do to get it working.

I had this happen to my DVD player recently.  The problem was that the disc I was trying to see it used a copy protection system is not yet implemented by my DVD player.  Normally, I don't have the DVD player connected to the network, so he had not received the updates of the firmware since I bought the player.  After that I connected it, you download an update of the firmware and I could see the movie.

My recommendation to you is to see if the manufacturer of the DVD drive has an update of the firmware of your player on the website of the company and, if so, has it, then test again.

Tags: Windows

Similar Questions

  • ONCE 1 DISC CD/DVD PLAYER READS ALL THE OTHERS LIKE WHITE

    has got an acer 5315 laptop filth single bed 1 disk. reads all the other virgins or be reformatted, I'm puzzled... any advice would be greatly appreciated.                am running vista Home Basic edition if it helps

    Hi Ronwaddilove,

    1. are you able to play these discs on another computer. ?

    You can read the following article and try to run the Fixit and see if it helps.

    Your CD or DVD drive cannot read or write media

    Hope this information is useful.

  • When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

    When I had the previous version of bit torrent, I had no problem at all, I downloaded the latest version of 721 and it has not worked since what can be done to get it working?

    I just downloaded and installed IT - no problem.

    Make sure that the firewall is not trying to block it.

  • Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

    Have installed Photoshop CS4. Replaced the drive hard and now I get error code 150:30. What should I do to get it working again

    Migration of CS4 breaks the license. That's what 150:30 means. Assuming you are using a Mac.

    You can use the Terminal method to repair the license... but I stress that carefully read you and understand the instructions here before you run it. beginning

    # 11. https://forums.Adobe.com/thread/1714695

    If this isn't what you want to do, you have to reinstall.

    Gene

  • 9.3 IOS on iPhone 4s: phone will not feed after upgrade. What can I do to get it working again?

    My iPhone 4s will fuel not after the iOS put 9.3 to level. What can I do to get it working again?

    Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

    You won't lose data by resetting, but it can erase some problems after installing new software or applications.

    If this does not work, try to connect in recovery mode, explains in this article:

    If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

    If it is not the case, the problem could be related to material and the phone must be verified by Apple or an Apple authorized service provider.

    Use iTunes to restore your device to factory settings - Support Apple iOS

    Apple iPhone - contact Support - support

  • Equium P200 - DVD drive reads all discs

    My DVD player just started reading some disks and not others, as some records are not read all the time, you can put a disk in, click on the dvd drive and it will open the player and say insert a disc, the device manager says device working properly and up to date driver.

    Does anyone know what is the problem?

    How understanding your problem if you have written on some and other disks?
    Can you explain what it more detailed?

  • DVD Player reads only CDs.

    Windows installs a CD-ROM driver for my DVD RW drive and won't let me install a DVD driver.  As a result, my DVD player not reading DVD where can I get a DVD for Vista x 64 driver?

    Hello

    I suggest that you follow all the steps in the following articles in order to solve the problem.

    Note: Click "fixit" everywhere where there is place for automated troubleshooting.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

  • My dvd player reads a pre-recorded disc with vista. __

    It is an Optiarc dvd rw AD-7560 s on a sony

    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    If the DVD or the DVD? If all the drive might have a problem.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    If the burn is a burning question at slower speeds, or by using the master could help. A
    CD/DVD cleaner might help.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    ===========================================

    This troubleshooting could not help if there is alignment and/or wear issues however it
    a shot.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • DVD Player reads discs since the installation of explore 9 on vista operating system

    My laptop dvd player will not play discs from installation to explore 9 on the vista operating system.  The light showing a disc in the drive, the disc drive is in the Control Panel, but the disc cannot be read. He asks me to insert a readable disc.   I've restored my system, still does not.

    Someone knows how to fix this?

    Hello

    Give this link a glance and follow the steps listed by SpiritX MS MVP. http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-cddvd-drive-doesn

    I hope this helps!

  • DVD Player reads dved but doesnot read cd

    my dvd player plays DVDs but doesn't read cd why... None filter upper and lower

    no particular reason

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Fix for CD/DVD drive missing:

    http://support.Microsoft.com/kb/982116

  • Qosmio F60 - BD DVD Player read DVD only if the theme is one of the aero themes

    I found that DVD Toshiba BD player will play only DVD if the windows theme is one of the aero themes.

    Personally I do not use aero.

    Does anyone know how to get around this problem?

    I can play the DVD using other software.
    The main attraction of using the Toshiba Software is it is the function of upconversion.

    Thank you.

    Hello hicham.

    This means that you use the DVD from Toshiba drive, but you can t without Aero theme Blu - ray game discs?

    In this case, I would recommend the DVD Player update. Just check for an update from Toshiba Web site:
    http://EU.computers.Toshiba-Europe.com

    Have you tested other players? Toshiba DVD player in my opinion is not important. I use VLC media player because he can play audio and video files more! :)

  • I renewed my subscription with a new bank account, he said 24 hours to reconnect. The money has not been picked on my account yet and I can't log on, what can I do to get it working again TONIGHT?

    I got a new bank account and had to renew my subscription, I shouldn't have waited until the last minute, but we had just moved. Now that I renewed it, there were 2 which weighed charges yesterday, now, today they have both been credited to my bank account. I am getting very frustrated because I have pictures to change. What should I do to get this support and get my operational photoshop?

    The CC bought in January 2015 has expired, you must buy because it can not be activated again, about not imputed credit card, contact Bank for the exact reason for her.

    Concerning

    Stéphane

  • CD/DVD drive reads all formats of DVD and regions

    Hello
    My Teac-dw-224th-a bed not all formats DVD and regions.
    It reads CD but not DVD at all.
    No DVD - R and DVD not yet regular. I checked the DVD region.
    I reinstalled the driver and also tried with different software.
    What can I do?
    Help, please!

    Hello

    It is possible that your DVD drive incorrect region settings.
    In this case, it is not able to watch all possible movies to DVD from different regions.
    Of course, you can change the settings for 4 times. But after this change, the parameters have been set and it is not possible to change more.

  • Satellite A60-122 CD/DVD Player reads no more CDs

    Hello

    I have a problem with my cd player. It is capable of reading DVDs, but not more than CD?
    How can I change? where is the problem?

    my computer: Satellite A60-122

    Thanks for help.

    J.E.

    Hello!

    Have you tested different s CD? Check it!
    It could be that the drive is defective but try more s CD. Maybe some are rough.

    I had similar problem a year ago. My CD/DVD drive didn't read any DVD's I tried all DVD s I had but without success.
    At the end I have to replace the drive. :(

    Good bye

  • Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

    Hello

    I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

    I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

    I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
    Thank you

    Hello Rafael

    I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

    Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

    I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
    You can replace one. It's very simple to do.

Maybe you are looking for

  • video driver updated, Mozilla still does not?

    I tried all the fixes and Mozilla will not charge. It shows in the taskbar, but not on the screen? I and map of old Nividia fx5200 graphic that has worked well until yesterday?

  • M200 continually crashing

    My M200 has been crashing at least once a day for the last week as I' will was. Here are my coordinates. I: 1.6 GHz model with a 60 GB hard drive, 1.25 GB Ram (1 G + 256 MB modules). Windows XP SP2 is installed. I updated the nVidia drivers and utili

  • Unable to connect to the remote Mitsubishi OPC server using datasocket

    I can read OPC items locally using datasocket, however if the customer is in another PC I get error 1184 when I try to connect to an element. The datasocket select URL works well. Both computers are Windows 7 machines in the same workgroup sharing th

  • After you install Windows Live Mail, he keeps trying to attribute the .eml file type to itself.

    On my office workstation (Windows Server 2008 R2), I use Outlook 2010 to network and business-related emails.  I installed Live Mail 2011 for my personal mail (hotmail, gmail, yahoo, etc) in order to keep it separate and open it only once or twice a

  • My XP computer will not see my computer 7.

    I have set up my work network and made sure all the computers are on the same workgroup.  My XP computers saw the 7 computer beautiful day that I put in place now, they won't see the computer.  They are always on the same workgroup. Help, please.