MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

Hello

You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Several good info here:
http://Club.myce.com/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

----------------------------------------------------------------------

Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.

Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.

Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.

Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.

Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • external dvd writer dvd1260i & it does not read any cd or dvd

    Mr President, I bought (1260i) writer, external dvd hp with one year in a store approved hp

    now it does not read the cd or dvd & it's within the warranty period. I want to repair or replace the product.

    Mr President, I also went to E-48/4, OIA E-44/2, OKHLA, BUILDING CARDINAL-JASOLA, GARDEN RAJOURI C-4 but they said that "we ddo does not address of office and its peripherals, we repair only portable and tablets.they send me to the other.

    "i.e. okhla jasola, jasola to rajouri garden & new garden rajouri to okhla.

    but nobody has solved my problem.

    so

    Sir please tell me the address of the appropriate service center & contact no.. in delhi & help me solve the problem

    Rajat salhi

    [Personal information]

    Sorry for the delay. I spoke with people in the service center below. Please visit them with the reader and the proof of purchase.

    Jabil Global Services India Pvt Ltd.

    107-A, first floor, cardinal Aurum

    Jasola District Centre, Jasola

    New Delhi 110025

    Contact: 8130496898 / 8130496899 / 8130496896

    Service level: carry - in

    It may take 3-5 days to get the replacement if necessary. Let me know if the issue not resolved.

  • Carpet * a DVD-ram uj 820 does not read anything

    Hello everyone,
    My problem: the DVD player and CD used to run perfectly since 2 years ago, I bought the laptop.
    A week ago the driver suddenly stopped reading and not reading any CD or DVD, no music, no data.
    Nothing...

    Can someone help me?
    Thank you, J.

    Hello

    It is possible that the drive is faulty, but to confirm this, the drive must be verified by the service. It will be interesting to know what exactly happens when you try to use certain media. Is the absolutely silent drive with no activity or the control LED lights up and car tried to read the media? What is the status in windows Explorer? If the list, what happens when you click on ODD? Is an error occurs?

    What you can do is:

    Remove the drive from Device Manager, and then restart the device. After this check the functionality.
    Try to clean the lens
    Playback option with CD or DVD original only test
    I'm not sure this will help, but if it happens all of a sudden try to restore the operating system by using the system restore utility

    It is really not easy to tell what the problem may be, but it is really possible that the drive is dead.

  • Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

    Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

    Hi jsims313,

     

    Welcome to Microsoft Answers Forums.

    We would like to get more information about you to help solve your problem. You better, please answer the following questions.

    ·         What is the format of the movie saved project file?

    ·         When you get this error message?

    To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

    1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
    2. Open a project in Windows Movie Maker.
    3. Click file, and then click Publish Movie.
    4. Click DVD, and then click Next. Creation of DVD Windows opens.
    5. All the steps to create a DVD using Windows DVD creation.

    Publish a movie in Windows Movie Maker

    http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS BLANK, PLS HELP ME?

    MY DVD RW OPTIARC AD - 7710H IS NOT READ ANY DISC, IT SHOWS THAT THE DISC IS EMPTY

    ago nero essential is installed in my laptop, I sort my problem that I did not use my dvd rw for many months, because of which some dust particles accumulated on the lens, and when I cleaned it with clean cloth, it worked, and now my dvd rw works properly, anyway thanks for your help @vijin v...

  • Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

    Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

    Hello.

    I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

    The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

    The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

    I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

    Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

    What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

    was soon Dan

    Hello

    Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

    Completely remove the Upperfilters and Lowerfilters from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
    and restart the laptop

    See also this article from the Toshiba FAQ:
    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

    and the Microsoft Knowledge base
    http://support.Microsoft.com/kb/314060/en-us

    Good bye

  • Satellite 5200-903-drive DVD not reading any type of CD

    My old 5200-903 Satellite with multi DVD doesn't read any kind of CD; material and pilot test shows no failure; What can I do else?

    Have you noticed the same test with DVD?
    I can't say for sure, but it may be that the optical disk drive is defective.

    It may happen that the calibration of the lens is defective and objective cannot be calibrated to the CD, but with DVD works perfectly.

    Check it out.

  • DVD on Satellite 1800 movies are not read correctly

    I bought a Satellite 1800. One with processor Intel 1.1 ghz, 256 MB ram and 20 GB HARD drive.

    The DVD drive seems to work fine, but not with DVD movies. I tried various movie playing software, and each of them are not played correctly in the graphics and sounds. For me, it looks like a problem with the graphics display power rather than drive. If this machine must be able to play movies with standard charts, etc.?

    Thank you.

    Hello

    Firstly: have you installed the LATEST drivers offered on the download Drivers Toshiba site? Must check out and make updates if not already done. The other thing is: you have tried different players and they didn t give you the you´ve of quality of reading expected.

    So now try THIS player: www.videolan.org

    VLC player wins the best out of your equipment of machines even if you´ve had an older system. I played movies Divx and DVD on pentium 3 and pentium 2 machines, so your machine should theoretically able to do.

    Welcome them

  • can not start any other os that mac os install dvd

    I can not start any version of windows or ubuntu on my mac pro 1.1.

    Tried:

    Windows 98

    Windows 2000 Professional

    Windows 2008 Server

    Windows XP home

    versions of Windows 7 Professional 32 & 64

    Ubuntu 10.04 lts 32-bit

    Ubuntu 14.04 32-bit and 64-bit

    most will show a cd when you hold down the ALT to start up

    and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

    searching the Internet, it seems many people have this problem.

    Details of my machine:

    Model name: Mac Pro

    Model identifier: MacPro1, 1

    Name of the processor: Dual-Core Intel Xeon

    Processor speed: 3 GHz

    Number of processors: 2

    Total number of Cores: 4

    L2 Cache (per CPU): 4 MB

    Memory: 16 GB

    Bus speed: 1.33 GHz

    Boot ROM version: MP11.005D.B00

    Version of the SCM (System): 1.7f10

    Chipset model: NVIDIA GeForce 7300 GT

    Type: GPU

    Bus: PCIe

    Slot: Slot-1

    The PCIe track width: x 16

    VRAM (Total): 256 MB

    Provider: NVIDIA (0x10de)

    Device ID: 0 x 0393

    Revision ID: 0x00a1

    ROM revision: 3011


    The system version: Mac OS X 10.7.5 (11 G 63)

    Kernel version: Darwin 11.4.2

    Boot volume: OSX

    Boot Mode: Normal

    Ensure the virtual memory: enabled

    64-bit kernel and Extensions: No.

    We window directly on the hardware, you must install via Boot Camp

    http://www.Apple.com/support/Bootcamp/

    a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

    The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

    http://Forum.Netkas.org/index.php?topic=1123.90

    Also:

    https://help.Ubuntu.com/community/MacPro

    http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

  • DVD RW drive (D :) will not read or write DVDs)

    My computer can not read and write DVDs and CDs.  Please tell me how to solve the problems.

    Thank you very much!

    Sue

    Hello

    Someone helped me to fix my computer, the problem disappeared.

    Thank you very much.

    Sue

  • DVD RW CD RW does not read CD ROM or Audio CD (XP Pro)

    I tried the fix option, tried to find out if it is activated, etc. Still not reading.

    Problem is the CD Player reads only DVDs (takes a minute to load) it won't read/write on CD or open the CD. The CD is not corrupted I used them several times before and others are empty. When I try to burn something using Nero 7 on an Audio CD it just keeps telling me to insert a CD R/RW blank, even if it is present in it. It makes a click noise all few seconds, but is never to play the disc, or accept it has a vacuum in and let me continue to burn files that him.

    When I tried a CD Rom it just stopped after trying for 30 seconds and has not loaded.

    When I tried a legitimate Audio CD (bought) he did the same. Ever, loads the data.

    When I try a DVD it works however it takes about 30 seconds to load this feature.

    Any help much appreciated.

    Thank you

    Chris

    The disc is a failure and the laser that handles CDs is completely dead. Replace the drive. It is a simple and inexpensive hardware solution. MS - MVP - Elephant Boy computers - don't panic!

  • Movie burned to dvd, projection of film, but not the photos

    I burned the dvd and it is to show the film, but not the photo at the end.  When I look at the menu, it is to show the photo are on the disc, but when I play it is just a black screen.

    In addition, the dvd play on my dvd player, but will on my pc.

    Thanks for the reply.

    The pictures are all JPEG files.  Does make a difference?

    I created the movie in windows movie maker, and when you select burn to disc, it directs you to the creation of windows dvd.

    =================================================================
    In Movie Maker... try Publishing (save) your movie in .wmv format in a folder on your drive hard.

    Windows Vista-
    Publish a movie in Windows Movie Maker
    http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

    Next... Open the .wmv file in creation of DVD and try to burn a video DVD.

    Windows Vista-
    Windows DVD Maker to burn a video disc
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

    Good luck...

    John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • DVD writer detects cd but not dvd

    My HL-DT-ST DVD - RW DL DVD on my Dell XPS400 burner has stopped recognizing DVD + r Discs. It won't read DVD + r discs that I have previously Burn successfully. Discs that I've already burned can still be read from my dvd player.  But not the burner.  When I start Roxio Creator Dell edition IO and insert a DVD + R disc, it says 'no disk in drive '.  If I insert a cd + r it shows I have 650 Meg of space and I can burn with success.   I did a system restore to return I can go without change.

    Concerning

    Pawgy


  • Pioneer dvd rw dvr - k16 ata device.

    missing or damaged driver code 39.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi mybugatti,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. you have any third-party DVD burning software installed on the computer?

    Method 1

    See the Microsoft article and run the fixit tool available below.

    If the fixit tool does not help, then try the manual steps, mentioned in the article below

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Method 2

    If the previous step fails, then I suggest that you update thefirmware of the drive and check if it works.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Bluetooth disabled after el capitan 10.11.4 updated updated

    I just did the mandatory update to the Version of El Capitan 10.11.4, my system now I have no Bluetooth available, everything Bluetooth hardware and services disappeared due to its update. Ideas please have correct?

  • Buy recovery CD, from where?

    Hello Somehow I lost the recovery partition. I would like to buy recovery CD or get the Windows operating system CD, because I still have the product key. My laptop is out of warranty, so can I still buy them somewhere? Or I have to buy a new OS? Tha

  • Updates configuration error

    Installed upgrading Windows 7 from Vista and things cost very well the first day. The second day when I had enough, there were 20 updates important and 4 not if important, so I let it update and went. I forgot and came back the next day and the scree

  • Map chart AMD 14 ZBook and docking station

    I have problems with a ZBook (AMD grahics version) 14 and an ultraslim docking station. HP two monitors are connected to the docking station with display ports. I can say that I have the latest BIOS, drivers and firmwares installed. I am running wind

  • How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

    I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I