My DVD s not of readng__

Similar Questions

• Installation DVD does not recognize my internal HD on a 2008 iMac

  I'm looking for suggestions here.  My 94 year old mother has used the iMac 2008 8.1 for internet e-mail.  We needed to upgrade its OS X 10.5 to be able to upgrade to a new version of safari to access some banking sites.  I upgraded the memory.  Sister has an iMac with OS X 10.6.2 Installation/restore dvd 2010.  I went to update.  I have caused the initial problem because after reading info seemed I could create a second partition on the hard drive of 250 GB and use Time Machine to back up before preceding.  See not all the warnings on the addition of the partition. (Yes, if I had not forgotten my external hard drive I should not try that, but I forgot it.)  Things seemed to make the partition, but time machine bogged down and hung up.  After trying many things, I found myself deleting and resetting on the internal extended (journaled) using HD, recreating a single partition using the guidelines GUID, thinking that I could just do a clean reinstall.  BUT, while I can check/fix delete etc the internal disk utility when HD started from my external hard drive so I boot from the OS install DVD it does not recognize the internal HD.   ? ? ?   Gives cannot update this post Mac.  If I run the Setup from the beginning of the disk upward once again, no offers to go to in the installation program.  I can access everything in THE RUNOFF when the post boot drive.

  Why THE works on the internal HD of the post start up (which was made with the 10.6.2 installation DVD), but not when started to leave the DVD left me puzzled. The DVD is not just see the it.  When it is started from the DVD with the external drive, he sees very well.   You are looking for ideas, thank you in advance.  By the Way the machine had no problem before starting this :) live and learn!

  If I understand what you were doing, you tried to use a Mac installation disc and to update another Mac? Is this correct?

  If I am not mistaken, which simply does not work. The installation provided with Mac discs won't work on another Mac, the original installation discs are machine-specific.

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Satellite C855 - 17M - CD/DVD does not work

  Hello

  I have a Satellite C855 - 17M. nd that the cd/dvd is not working.
  I tried upper and lower in regedit but the file is missing, and said it also the format is not supported.
  Any 1 help me pls pls.

  Thank you very much

  Hello

  What exactly do you mean by not working do not?
  You have problems reading the disc or write data on the disks?

  Which discs have you tried and you have a few problems with the disks?

• Satellite Pro L100 - DVD will not turn even upward

  My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.

  When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
  Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?

  I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
  If this is the case why Windows XP does not recognize a DVD - RW?

  If someone sees something I missed please?

  Hey,.

  Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.

  The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.

  Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)

• Satellite A100-709 - DVD RW not writing DVD discs

  My computer is a Toshiba Satellite.
  My DVD player is TSST corp TS-L632D CD/DVGW.
  My dvd is not written on DVd but it is the reading of dvd and cd writing. Is - this problem is hardware or software proprem.

  Thank you

  Vincent

  Hello

  What applications did you use to write on DVDs?
  I m using Nero. It s a wonderful application that allows to burn with different media.

  In addition, I found a driver DVD-RAM v5.0.2.5 on the European driver Toshiba page.
  Install it and check what is happening with the laptop.

  Otherwise, it might be a hardware problem

• Some DVDs will not play on my laptop satellite

  I was redirected here from this forum: http://forums.toshiba.com/t5/Drivers-and-Utilities/tsstcorp-cddvdw-su-208bb-failing-to-recognize-dvd/td-p/463603

  I can't read some DVD (which will play on other computers) but some DVD will not work.

  As per link above the pilot is tsstcorp cddvdw su-208bb. Tried uninstalling the drive and reboot but no effect.
  I don't know my exact model. It's just a Satellite, and this is the only information I can find.

  It is not easy to say what may be wrong with that. Try to clean the lens and check it once more.

• Satellite 1400 DVD will not play DVD

  Hello

  After cleaning the notebook of the cousin of my fiancee, who had a number of viruses, the DVD player will play is no longer the DVD (it will play data CD, however, can read data DVD as well, but I don't have any of those). When I put a movie disc, it will try and try to read it, and in the end, he gave up. If I click on the drive again, it asks me to put it on a disc.

  I tried all sorts of things to fix. The DVD-Rom is a Hitachi GDR-8081n. I uninstalled and let Windows detect it again, I uninstalled the secondary IDE channel is on, to ensure implementation in DMA mode (it was in PIO), no effect. I loaded the latest version of WinDVD, no luck. I uninstalled WinDVD and installed PowerDVD, no effect. I manually deleted cdrom.sys and had put Windows back, without result. I found an update of the firmware somewhere, but unfortunately it simply does not work (it calls for the CD/DVD is not actually present).

  Someone had a similar problem and figured out what to do? Search online for those who have had similar problems with other DVDs, the usual assumption is that it is a hardware failure. It is quite possible that this is the case, I guess, but it would really be a coincidence for making it happen the same day wherever I tried to wipe the drive, so I am doubtful.

  Any assistance that may be provided is much appreciated. Thank you.

  Hi Elio,

  From your description of the problem, I think that your DVD player has a problem with the laser. IN a combi laser scanner uses two different frequencies, one for CD and one for DVD.

  I suspect that the frequency of DVD is not working properly. The fact that the player to repeatedly try to read a DVD when you insert one indicates to me that the software works correctly, but the laser is not able to focus properly on the DVD.

  Unfortunately, your only real option is to consult an authorized Service Agent or replace the drive yourself if it is the least expensive option.

  Best wishes

• Music CD and DVD do not work on satellite notebook

  Hey people

  I have a problem. I'm not very good with computers, but I know the basics. I have a Toshiba Equium with windows XP. It of my girlfriends, so when I got it was really slow with all its stuff student.

  So I deleted everything and re-installed the computer to what it would have been when it is new, but now, nothing works. Music CD and DVD does not infact everything I put in the drive does not work. The orange light is on the cd player suggesting there is a CD player, but the computer is not picking it up.

  Any ideas?

  Thank you

  Hello Klark

  If the laptop is installed with the recovery media, there must be preinstalled WinDVD application and you should use it to watch original DVD movies. Have you already tested?

  If you try to use original music CD try to boot with Windows media player. It should work. You can also install the latest version (v.11). What is with mp3 files? You hear mp3 files? Seems works well?

• Re: Satellite Pro L450 - 13P - CD / DVD does not auto play

  Hello

  Recently, I've provided a customer with a new Satellite Pro L450 - 13P (Windows 7 Professional). He came back to me the a few days saying it was a great laptop but CD / DVD will not auto play. I googled this problem and I tried all kinds of solutions suggested, including the various changes of registry, uninstall and reinstall the device DVD driver, unchecking and rechecking always use AutoPlay box everything has failed.

  I have a Toshiba Satellite A200 (Vista) and thought I would try to insert an automatic game disc in my drive. To my astonishment, my laptop had developed the same problem, it used to auto play, but now it doesn't.

  Any assistance people can give me in this matter is accepted with gratitude.

  Thank you very much
  Mark

  Hi Mark

  As far as I know autoplay can be set to Autoplay settings (Control Panel).
  There you can define what should happen when you insert each type of media or device.
  For example, I have all the options set to ask me every time.
  Have you tried to change these settings?

  Have you tested with different media?

  If you have noticed that mean the same thing on your laptop computer you have tested with the same support as your client?

• After the BIOS update DVD driver not reading not DVD - Sat A80

  Hello

  I have a Satellite A80-131 and after bios update (latest version 2.5) by windows update procedure, my DVD do not read DVD media more. It is possible to play CD but not a DVD media.

  Can I reinstall the old bios? Can I reinstall the firmware?

  Thank you
  Ronai Lisboa

  Hello

  Strange!
  On the Toshiba driver page, you will find also 2 Firmware updates.
  Check which drive you unit and try to update the firmware.
  Also try installing the DVD ram driver.

  PS: It is not possible to roll back the BIOS or install the first version of the BIOS on the device. Only the Toshiba service partner may DOWNGRADE the BIOS

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Satellite P105-S6197 - after that the Windows XP Home edition installation DVD is not readable

  Hello everyone (sorry for my English) :)

  I buy Satellite P105-S6197 with Vista Home Premium (RUS). Immediately, I formatted the HARD drive and installed WIN XP PRO without any problem. All drivers installed, correct and in Device Manager have no unknown devices.

  But after the operation my Win XP does not read the DVD, CD - no problem. I try to boot from any bootable - no success DVD, disc not reading. In the BIOS I normally see information DVD player.

  What can I do to diagnose my problem?
  Maybe some MS updates, update BIOS...
  Please help me :)

  Hello

  I wonder what site Toshiba driver did download you the drivers?

  Mhhh is s a Toshiba model we designed and delivered by US.
  Thus, you should use the Tosh site to download driver.

  I have check the pilot US page didn t find the XP drivers and it's one reason why I asked.
  I would recommend when even update the Win XP OS on the latest state. This means that you should visit the Microsoft site and should perform a patch test!
  http://update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Please note that, sometimes, several start-up procedures are required to install all the patches

• Satellite L670 - CDs and DVDs do not work smoothly

  Hello!

  I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
  I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.

  Could someone help me with this?

  Greetings from France!

  With cups, you mean peak and its gel for a second, right?

• DVD is not recognized on Satellite L500-1XJ

  Hi all

  The DVD is not recognized when a dvd was released in the laptop.
  I tried to reinstall the driver but no luck.
  Does anyone have an idea?

  Thank you

  Gunter

  It is not easy to say what the problem is here.
  We don t even know what DVDs you are using.

  Maybe you should write a little more of everything cela and offer some fact and relevant information. You know, for a better understanding.

  Also which driver you have installed again?