my e drive won't read my popular dvd set, but did not work
can not play dvd does not read that the reinstalled dvd optiarc didn't always help ran set yet, it does not play, but he will play cd
Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems
CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/
Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems
Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.
Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.
Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
My cd/dvd drive won't read any cd and its lack of not my computer.
When I insert a cd it will read her, I checked whether its lack on my computer and it isn't and in Device Manager it says the drive works properly.
Hello, Ines Alteir,.
Thank you for your message. Firstly, have you tried using different CD? If Yes, are you encounter problems will be all the CDs? If this is the case with all CD, try the following, otherwise, it could just be a damaged or scratched disc.Click HERE to run the Microsoft Fix It!If you're still having problems, you may need to go to the web site of the manufacturer of your computer and download/install the latest drivers from your computer's CD/DVD.Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
DVD +-RW ND 3650 a unit is not reading or writing to the media. I tried the diagnosis MS-Fix - it, but he could not solve the problem. I am running MS7 Home Premium SP1 (build 7601) on a Deminsion of Dell E520 with 4 GB of RAM with 2.13 Ghz Intel Core 2 Duo processor. I ran MS-Fix - it, but it didn't Fix it. Mgr. said device the device works correctly, it is not. I checked for updated drivers and the drivers are up to date. I checked the internal connections and everthing looks good. Before installing a new optical drive can anyone lead me to a solution?
Hello
Don't forget to check the diagnosis with Dell Support, their documentation online, and ask for their
Forums about known problems. Dell has a few good methods of troubleshooting on their site.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/
=======================================================Even if you did some of them before you begin please from the top and work
down, jump, nothing, until the issue is resolved or these methods have been exhausted.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://Club.myce.com/F61/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
iPod screen won't go to the homescreen tried restart did not work
my ipod touch generation 5 restart I tried from 4 to restart when a black screen after I was on who's who and now I can't go back to my home screen normal my screen is black it turns on when I take my volume buttons and my button poower andi will still get the black screen help
Have you tried to press the sleep and the keys to the House for 20-30 seconds? Once you see the silver Apple, let go and let restart
-
My driver CD won't read CD or DVD what can I do?
My CD driver on my laptop won't read CD or DVD what can I do? The drive will make noise but nothing happens and can not open the DVD to play or whatever it is there at - it an update I don't know everything? Sometimes on the CD and DVD. Help!
Hello
Try to check the links below. :-)
FixIt CD and DVD Player - http://support.microsoft.com/gp/cd_dvd_drive_problems
Also, try to check the Device Manager, you may encounter an error in code for the reader, once you have confirmed that there is an error code, please refer to the link below on how to fix the error code.
-
Continue to try to turn on my firewall, but won't automatically and using the manual option does not work either. Can repair you.
HelloFollow these instructions:Download and install Windows Repair:When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:-Reset the registry permissions-Reset the permissions of files-WMI repair-Repair Windows FirewallThen click Start. Once it is finished, restart your computer. Let us know if that helps you.Brian -
I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:
LIFT, DRAG, THRUST and GRAVITY
If I run it on a machine with Win 7 there is no problem.
Richard Grosser
Hi Richard c. Grosser,.
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.
http://social.expression.Microsoft.com/forums/en-us/categories
-
Blocks - Spooler subsystem or the display driver did not work properly
I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?
Hello
1 when was the last time, he did not work properly?
2. the accident happens at random or when executing a particular task?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Check if the problem persists, if she does not follow the steps in method 2:
Method 2:
This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.
I also suggest you to follow the steps mentioned in the link and check.
Do not operate the automated FIXIT. Follow the manual steps and check.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894/en-us
(Also applies to Windows Vista)
Method 3:
You can also update the display drivers on the manufacturer's Web site or use the link below.
Updated a hardware driver that is not working properly
See also:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Hope this helps and keep us informed if you need help.
-
Driver for 2 GB AMD Radeon HD M 8730 does not work. Dell Inspiron 3521
my laptop is brand new. 1 week and I cannot get my Radeon 8730 M graphic card work. laptop model is Dell Inspiron 3521. I tried to install the original driver from the dell support page. I tried with the pilots of the AMDs website. I have installed and uninstalled the drivers at least 10 times. When I run the catalist of amd installation configuration shows that all the drivers and the software is correctly installed and up-to-date, but Device Manager shows something else. also, I have absolutely no option available in the catalyst software. my windows system note (index) is 1.0 due to the graphic performance. any ideas?
return with good news.
I formatted the partition on the witch my windows was installed. re-installed windows and all the drivers. I started with the AMD driver but I was disappointed. It still did not work. then I thought, maybe there some co-drivers with some chipset drivers, so I downloaded and installed all the drivers. including the Intel HD 4000 driver. I think it was one that has not been installed correctly and the Radeon card because of the witch did not work. so if anyone else has this problem, don't forget to uninstall the driver amd and intel driver hd 4000 and then install again, it should solve the problem.
Thanks for the help.
Norbert
-
* Original title: stand alone single Drive & WIN-7
I have a model of disc hard SimpleTech #96300-41001-170 stand alone. I can see it in the devices & Printers. but will not work. It has been designed
to work with Vista, XP & 2000. I am running Win - 7. Help, please!
Thank you!
Mike
Hi Mike,.
Thanks for posting your query in Microsoft Community.
Since it has been designed to work with Vista, XP & 2000, it may not work in Windows 7 due to incompatibility problem. Therefore, I suggest you to visit the Web site of the manufacturer of the hard drive and download the driver available for the latest operating system.
If the driver is not available for Windows 7, download the compatible driver for the previous version of Windows and I install it in compatibility mode.
a. do the driver installation file right click and select Properties and then tap or click on the compatibility tab.
b. check in the run this program in compatibility mode for: box.
c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
d. try to install the driver and verify.
Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
I tried to create a partition on drive D, but did not have the letter D.
* Original title: Windows 7 and D drive
I tried to create a partition on drive D, (don't use it on my computer) through disk management, complete the Wizard but did not have the letter D. I'm curious to know why this is happening.
It could belong to a shadow drive or Player cards on the machine. Simply use the next available letter...
I thought that this might be the case, but I wasn't sure. I have software from our parent company in Asia and must be run on drive D, great pain. they want it distributed in North America, but our clients would not want this restriction. I try to explain the powers that they need to return to square one on this.
I appreciate your comments.
You can see the disk manager in Control Panel. If there is a hidden D: drive, it will display here. My guess is the drive letter is not assigned or assigned to the next letter somewhere down the line. If there is no D: drive you can assign the D: drive in there. You can change the drive letters in there also. give it a try.
-
I created a Javascript script that adds a watermark on the document action "paper print". This works in Acrobat Pro, but does not work in the drive. I am a novice using Javascript, so what am I doing wrong?
Cannot use either addWatermarkFromFile or addWatermarkFromText methods of document with player as shown in the documentation. You can hide/display the form fields and the existing layers, so consider this approach.
-
I went in lightroom and can't find my photos. I lost the link before and did the right click to find and they have been found, but it's different.
I bought an external hard drive and copied some elements but did not cut their. I did a back up on my external hard drive, but even once did not move them. I did the simple troubleshooting and it doesn't work. I'm trying to find the original by right clicking the? on the folder LR and once I find the file it tells me that Lightroom has this file already in the catalog - and I want to merge. I tried one and it disappeared or moved. Help!
Use the file Explorer to see if the images are still in their original location. I suspect that move instead of copy them. This can happen if you drag you the.
I found that it is best to use either right click on a file or folder name and select copy then right click on the drive-destination folder and select Paste or use keyboard shortcuts to copy and paste folder and files from one disk to another. The keyboard shortcuts are the CTRL + key C to copy and Ctrl + V to paste in the selected destination folder-drive.
-
My CD/DVD driver won't read any disks. (windows Vista Home Basic)
My driver CD/DVD does not read discs. Whenever I have insert a disc into my CD/DVD player, absolutely nothing is happening, as the drive is not yet there. I tried to get gpedt.msc as help Windows said to me, but the file is not found. Can someone tell me what's wrong and help me fix?
Hello
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack.Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
I have this CD/DVD which will play normal CD but will not play any DVD (DVD + R, DVD-R). I noticed that the DVD would not work when I was a BONE
RESETTLEMENT. I put in my Windows XP restore disc, and installed successfully. Then I put in my drivers disk that was on a DVD-ROM drive and it wouldn't work!
I could hear the spinning, but it sounded abnormal, and nothing appeared in my computer. Not open same AutoPlay. Frustrated, I decided to get the drivers of
sites of different manufacturers, including the driver of CD-ROM to see if I could start the DVD. Even after that I installed the drivers for the hard disk, DVD will not play again.
Any ideas?
Hello
I suggest you run the fixit and see if it helps:
http://support.Microsoft.com/mats/cd_dvd_drive_problemsIt will be useful.
Maybe you are looking for
-
Why can't me and my wife receive photos of my sister in law and brother in law and can not see or receive but between me and my wife, we see and receive photos between us. then between my sister-in-law and brother-in-law, they can send and see the ph
-
HelloMy camera no longer works. When I opened the camera, the screen remains black. The front camera works. If I use the diagnostic centre, the app crashes. Does anyone have this problem? Thank you
-
Buying a new XPS 8700 or try?
I'm an old customer of Dell. I have 4 generations of Dell Office wrapped around me that I work, which dates back to the Dimension XPS Gen 4, until my last 9100 XPS. I started having a few problems with the 9100, so I started to look at the XPS 8700.
-
I have 4 GB of RAM installed.
-
Hello Thank you for taking the time to read this! Yesterday that I tried to connect to an HDTV using VGA instead of someone else, worked well. Buy a vga cable today and connected to my 1080 p full hd Phillips and got a BSOD almost instantly. I tried