My Epson Stylus 610 says to replace the ink cartridges, but I just put in new cartridges Epson

Similar Questions

• printer says to replace the ink cartridge, even though it is new

  Hello!

  Could really use some help with my printer. I recently bought new ink cartridges and I replaced the "old", but then my printer started to show on the compensation carriage jam error messages, even though it was clear and since then, he has constantly shown this error message on ink. He wants me to replace an empty ink cartridge to continue printing, it won't work otherwise.

  Ink, that I placed in the printer is totally new and authentic, but there is no answer, he displays the same message to two ink cartridges, which makes me realize that it of not really discern who is new or empty.

  If I remove them both, it tells me that there is an empty ink or damaged.

  I tried the reset of the printer, stop it down and turn, but the same message is displayed immediately. The light next to the screen flashes all the time.

  When I replaced the old cartridges I did not process the printer, I replaced them all first and then let him treat. Maybe it was wrong to do so?

  Any help is appreciated!

  It seems to be a problem with either the hardware of the printer or the replacement cartridge. If it is the cartridge, it should be covered by warranty (if it's authentic HP) given that you bought at just. Now, I think that your best shot would be to contact HP Technical Support to see all the other possibilities for you.

  The only other option would be to try an another new cartridge replacement for rule in or out the cartridge at fault.

  If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• I need instructions for replacing the ink cartridge on my color laserjet pro 100 mfp175nw.

  Can you please send me instructions to replace the ink cartridge on my color laserjet pro 100 mfp175nw.  I have a 126 a cartridge.  Also, where can I get a full manual for my printer?

  Hello revammann

  You can find instructions for the replacement of the cartridge to print here and you can find the user manuals here.

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• The documents don't print well after replacing the ink cartridge

  Original title: HP 6980 printer

  I just replaced the ink in my HP 6980 printer; now all my documents are dirty printing

  Hi, Annette.

  Manually clean the cartridges

  Scroll down to "remove the duplexer.  Clean the rollers alike.

  5 easy steps to clean inkjet printer

  Print quality problems

• Replace the ink cartridges and not shown on the new copy of the outs ink

  I have a HP 8500 printer a9110. I just replaced all ink cartridges 3 colours (black cartridge is always good). After replacing, I tried to print and all that comes out are white print out without color or very light tone. I tried to go to tools clean and align the heads. Cleaning worked but received failure on align option. I turned off and unplugged the unit kidnapped and released new ink cartridges. Also, I removed the two heads and cleaned with a soft cloth. Everyone knows this problem before. Any help is appreciated.

  I don't think that should have used a lot of ink.

  Although it shows that 60%, I think you should be able to print as well.

  Sorry I don't really have much information on it, but I'm glad you were able to solve your problem!

• OfficeJet 6600: Error general printer after replacing the ink cartridges

  Since the departure of cargtrides of ink is "Printer failure" and "there is a problem with the printer or ink system" and after pressing on "?" shows only "printer General error" without error code.

  I did all the steps he says I (reset the power) but the problem persists. Ink cartridges are new and HP.

  What could be the problem?

  Hi Chris2612,

  Thank you for your answer!

  I would definitely say to change the cartridges, if that does not solve your problem, then please call our hotline to the 800-474-6836 to get help. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• what I need to replace the ink cartridges to scan?

  I have a HP officejct pro more than 8600. I need to know if the empty ink cartridges need to be replaced in order to scan.

  Hello

  During the warm-up routine, it will check all THE components, including the inks. It may stop here that something is missing or not right. My Photosmart 7510 can read and copy (white) with cartridges empty ink, but in general and to protect the life of the printer, I couldn't do that, only for the test. Please see the discussion that follows for your printer:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/do-i-have-to-buy-color-ink-cartridges-HP-OfficeJet-Pro-8600/TD-p/1706711

  Kind regards.

• How do you replace the ink cartridge in my Officejet Pro 8600?

  The mechanism of cartridge is a little different in the Officejet Pro 8600 compared to previous models of HP printers.  The cartridges are spring instead of the snap-in cartridges previous style.

  There is a video, see below, available which shows how to install and replace the cartridges in the 8600.

  HP also provided a document containing pictorial information on how to change these cartridges out.  Click on the link below to access this document.

  OJ8600 cartridges

  Hope it will be useful for people.

• I replaced the ink cartridges, but the printer still shows empty black cartridge. How can I reset?

  I have a HP Deskjet 3050 a - J611j all-in-one printer.  I use Mac OS 10.7 Lion.   I replaced the empty ink cartridges.  Now it shows the color cartridge is full, but still shows black cartridge empty.  Is it possible to reset it?

  Hi Shanmarie1103,

  If the cartridges are rebuilt you will not get a read out on the ink levels. You will need to use a new OEM cartridge with a new chip for the ink levels. Click on the links below for more information.

  The truth about remanufactured ink and toner cartridges

  Price of ink

  

• replace the ink cartridges and now I get no output black (although the colors seem to work). Help?

  With the help of a printer C410e/HP Photosmart Premium e-ALL-IN-ONE, I went through the original ink cartridges without any problem.  I have received warnings that the ink was low and bought the HP 564XL cartridges and installed according to the instructions.  Now, the output seems only to print the color inks, but not black.  After trying help indicating to try pulling the plug for 30 seconds and then plug, I got about 2 pages of output stained and white pages and then again.  Any suggestions on how to fix this?

  I solved this by buying another cartridge of black ink.   Guess I got ripped off on my previous purchase.  The two were the same shop HP ink cartridges.

• Replace the magenta cartridge on the HP Officejet says 6600 still needs to be replaced

  Impoverished cartridges must be replaced before printing. Because, for the first time and still have the same error. I already have market power. What's next? I use HP ink cartridges

  I spent a frustrating hour and a half with a similar problem.

  Install cartridges were exhausted, so I bought new ones. The replacement, he kept complaining the magenta one not recognized or is damaged. I am worried because my new cartridges were not original HP.

  Sometimes, he tells you to power off the printer, and at other times, he said you turn off may damage.

  I put my old HP original magenta cartridge in and it came with the same message. I was afraid that the device had been fried. In desparation, I thought that maybe it's all just bad contacts.

  I did a small wedge of paper folded twice and laid it gently between the new ink cartridge and the small black plastic on the top right tab that serves as a guide when you replace the ink cartridge in the slot. This gives a bit of pressure to push the chip at the top left of the ink cartridge to make contact with the indication on the printer itself. Now he reads both cartridges without problem, and it prints like new.

  Without paper, I could manually gently press the cartridge to the left and it would only print a page before she herself back in place in a position where it cannot be detected anymore.

• HP ENVY 5646: Replacement of the ink cartridges

  Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp.

  I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the printer.

  So - I replaced the color ink cartridge is 'no snapshot' with the color cartridge instant I received a few weeks ago, when I signed up for the instant the ink plan, my question is: should I also replace the ink cartridge 'snapshot not' black now with the black cartridge of instant or wait until it is empty?  Is it true that I should replace the black cartridge and color at the same time whenever one runs out of ink?

  Thank you very much for your reply - much appreciated.

• replacement of the ink cartridge

  How will I know when actually replace the ink cartridges?  When is it really happened?  Of course, low ink message seems to go faster than expected.

  Hey,.

  That is a good question.  Low ink warnings are warnings.  They are there just to let you know that you are getting to the bottom of the cartridge.  Think of it as a fuel of low light as in a car.

  I replace cartridges when the printer tells me that it is empty, or once I noticed a deterioration in print quality that the routine of cleaning will not solve.