My Epson stylus NX300 printer is printing very light. I'm not black ink. What can I do?
The glass is normal, telling me 'copy' and 'simple letter '. When I print, it comes out grey. I can't change the cartridge except tells me the glass.
Hi Sharon
This questions the printer head problem. see the following steps for cleaning print head:
Click the Start button, if you have Windows XP. If you have Windows Vista, click the Windows icon located in the lower left corner of your computer screen.
Click on "Control Panel", then "printers and other devices. Finally click on "View Installed Printers or fax printers."
Right-click on the name of your printer and choose "Printing Preferences". This should open a new window; Then look for a tab or button labeled maintenance, or something similar.
Find the button that says "Print heads" or "Clean print heads" and click it. You may be asked to choose the print heads; Choose them all if you are. Make sure that there is no paper and ink in your printer, and it is turned forward.
Remove the page that your printer has printed and see if there are the missing gates or boxes. If it does not exist, you can just exit the program - your print heads are not blocked. If there is missing grids, then click on the "cleanup" or even button labeled.
Once you have finished the cleaning, print another page to make sure that your printheads are is more clogged. If they are still clogged, repeat steps 1 through 5 until your printer is printing clearly.
Tags: Windows
Similar Questions
-
Satellite A200 and Epson Stylus SX100 - printer, Scanner recognized not
Hello
I have a Satellite A200 (originally with Vista Home Basic) and re-installed Windows XP Home SP3 32-bit edition. Everything worked very well, all USB ports are ok (tested with PDA, webcams, USB drives...). I installed a multifunction Epson Stylus SX100 printer and the laptop only detected the Scanner, but not the printer.
This multifunction printer has been tested on a non - laptop Toshiba and everything was ok. (The same drivers from the Epson web site). If I install the CD-Rom Epson, with the ease of installation, then it asks me to connect the printer (the first driver it installs). After a few minutes, the program stops installation because it can not detect the printer. If I install it manually (sending to the printer to another port), and then install the scanner. then the scanner is detected, but not the printer.
I can't go to the properties of the printer and redirect the printer to the USB port as the port is not in the list.I downloaded the drivers for Satellite A200 WXp32 tips from the Toshiba web page.
Any idea?
Thank youHello!
Have you updated Windows with all hotfixes from Microsoft? Check the Windows Update site.
Also try the latest driver on Epson site. Maybe they could work.
And what's happened, if you delete the printer driver, and then connect the printer to the laptop?
Good bye
-
Epson Stylus dx5000 printer/copier/scanner does not print or copy, scan only.
Original title: epson stylus dx5000 printer/copier/scanner
This device is not printing or copying.
This device is only scanning.I continue to be told that the spooler does not work, then stop and restart.Did it many times.Still no results.Epson genuine ink in the printer.Hi Carolina,.
1. What is the operating system installed on your computer?
2. you get any error message?
Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer. To resolve this problem, use the following methods in the order in which they are presented. If method 1 does not resolve your problem, go to the next method.
Please follow the methods and check if it works very well.
Method 1
Follow the steps from the link:Solve printer problems
Method 2
Clear printer spooler files and select the spooler service.
Step 1
a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
b. double click on "Printer Spooler" in the Services list.
c. click on stop, and then click OK.
d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.Step 2
You must be logged on as administrator to perform these steps.
a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on Print Spooler serviceand then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
f. e. the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.For all windows questions do not hesitate to contact us and we will be happy to help you.
-
Epson Stylus sx115 printer will not pring black in XP
My Epson Stylus sx115 prints in color but not black ink. Nozzle and the head alignment are beautiful and the cartridges are full. Please can you help me understand how to print with black ink again. It cost me a lot of time and money to understand the problem. Thank you very much to all those who can help me.
Hi miltsmomxx,
See the article next to Epson Web site:
I hope this helps!
-
How to install EPSON STYLUS TX135 PRINTER
How to install EPSON STYLUS TX135 PRINTER
Concerning
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/supportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Download driver printer Epson Stylus CX4800, etc., last nite... today do not have access to the printer... Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers. What can I do to get this printer permanently replaced on the acceptable list of printers or if I should buy a new printer! This has been a problem for almost 2 weeks now... What can I do? Every time that you add the printer to the list as soon as I turn off the PC, the printer is removed from the list of Windows! Is this a defect of the windows program I or is this printer is no longer one that windows will recognize?
Help!
Hello
"Every time that you add to the list"
We do not do anything.
It is not Microsoft.
These are public Forums set up by Microsoft on their servers and animated by them.
We are mainly Windows users help each other here.
Here is the link to Epson to the latest drivers for your printer model.
Choose the appropriate operating system from the Menu drop-down.
And a Troubleshooting Guide for it.
See you soon.
-
How can I install my Epson Stylus Cx7400 printer copier when I don't have the cd 4 it?
I have the Epson Stylus Cx7400 printer copier scanner and I don't have the cd 4 it I do not had a 2 when I moved and I got another computer, I was wondering if I can install some knowledge how to get the cd out?
Above is the link to Epson for your printer model.
Choose your operating system it > download/save the drivers on your desktop > follow the Epson printer Installation Instructions.
See you soon. Mick Murphy - Microsoft partner
-
This Epson Stylus D68 printer.
Epson Stylus D68 printer. Of ink and recycles bin red lights flash alternately and the printer does not. Why?
Church salvation,
Are these lights on the printer?
Looks like it's maybe a problem with the printer hardware.
You can check with Epson to see if they have a few troubleshooting steps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Epson Stylus CX9300F printer getting the error "paper is low or empty.
I just added my Epson Stylus CX9300F printer to my laptop Windows 7 (64-bit) and the resolution of the problems are saying that there is 'no paper' in the printer... I also use this printer with my Office Windows 10 (64 bit) - and it prints perfectly fine from this source.
Does anyone have any ideas as to why there is this error display "paper is low or empty" on the laptop?
Soon :)
Hello
I suggest you try it please add the printer manually:
Click "Start" > click "devices and printers".Click on "add a printer".Click "add a local printer.Click on "Create a new Port" > scroll down to "Standard TCP/IP Port" > click "next".Type the IP address of the printer and click "Next".
The printer must be found and use the USB driver that you have already installed, if the driver is not used you will need to add the driver.
I hope this helps! -
Epson stylus DX5000 printer does not properly
My old Epson printer works well with windows 7, since I've updated from windows XP. I tried to reinstall the driver to printer without success. My attempt to buy a driver restore from a created web support over certain problems. After that enter my computer instead of what I thought, was to be a simple activation someon told me too may mistakes that they should be supported. I didn't, so I unplugged my PC because they had taken over my computer and I couldn't stop.
Moved from feedback
Original title: my Epson stylus DX5000 printer
Hello
Here is a link to the drivers available for your printer model Epson DX5000
Click the drop-down list here to select your operating system to Windows 7.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
"Someone told me too may mistakes that they had to take care of." I didn't, so I unplugged my PC as they had taken on my computer.
About the error messages and giving you remote access to someone, do the following:
You gave them remote access they may try to steal your credit card and bank information and also perform an identity theft on you.
If you do Internet banking, contact your bank, explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.
See you soon.
-
EPSON STYLUS CX4800 print the image comes out blue instead of the other colors
Original title: printer
Each time, I printed the picture comes out blue instead of the other colors, I have only blue. If I want to print a photo of family is blue spell. What can I do I have an Epson STYLUS CX4800
Hello
1. What is the color of ink cartridge in the printer?
2. the problem occurs only in print images?
You can search the print settings in the printer tool and select the color according to the requirement. Also make sure that the cartridges are properly ventilated and locked.
Epson Stylus CX4800 all-in-One Printer
You can watch the frequent question on the Epson Stylus CX4800 printer:
Epson Stylus CX4800 all-in-One Printer - FAQ
Alternatively, you can contact Epson for more assistance on the same:
Welcome to Epson support
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes&expansion=1000000
Hope this information helps. If you need help with Windows, just tell me and we will be happy to help you.
-
Hello, my epson stylus cx6400 printer prints but printing is not visible while there is ink that do please thank you for your answers
Hello
You asked your question in the English version of the Microsoft Community. Please click on the icon of a globe (change region) at the bottom left of the screen, then select your preferred language. Once this is done, ask you now ask once again.
http://support.Microsoft.com/common/international.aspx
Hope this information helps you.
-
drivers for epson stylus sx535wd printer
you just bought a new epson stylus sx535wd printer all in one, without a driver, how can I download the
You can find them in here...
http://www.Epson.co.UK/GB/en/viewcon/corporatesite/products/mainunits/support/11004
Once downloaded, it must be installed...
-
Reference Dell 2135cn print very light drum cartridge replace?
I have a Dell 2135cn printer. It is 1 year. It has started printing very light copies. I replaced the toner cartridges, but he continued to print light. I have ordered that a drum cartridge and who took care of the problem. That was 3 months ago. Now the printer prints very light once again, without success, when I replace the toner cartridges. Do I need an another drum cartridge? Is it normal to have to replace the drum cartridge so often. What else could be the cause of this problem? Thanks for your help.
I just had the same experience - called Dell technical support. I use the replacement toner. Even if my 2135cn is 3 years old, he apparently has a support life support phone. In any case, the fix was to enter in the Setup, maintenance, admin, non Dell toner - be sure to what it gives 'On '. My was not, and as soon as I changed it to, black printing went from barely legible to acceptable.
-
Printer does not print not black ink.
Printer does not print not black ink. I have a more product HP6500A # CN557A, mac OS 10.6.8. There is no error message. I'm trying to print an excel worksheet. There are 1 of red on the sheet that prints and 1 cell of green that prints but no black will be printed. It's a hp black cartridge relatively new which was printing very well recently.
Hello world
Check out the following thread below which can also help you with problems you encounter.
Maybe you are looking for
-
This is a test, I'm trying to change my post
-
Portege R400 - Windows with WAN boot / 3G
Hello I want to start windows on my portege R400, but with the LAN allows bluetooth and 3g disabled. Now all are activated after the start, and I have to stop the 3g using the cards on top of the screen. I want to just turn the turn on when I need it
-
Does not not on the AC adapter / CC, but it will charge the battery
Hi all Little annoying it... The laptop can run on current alternative at all... but it will charge the battery while the laptop is turned off. If I remove the battery it will not work for flashing the bios seems to be a fruitless task. Any ideas wha
-
Replacement of the hard disk for Equium A60-155
I need to replace the hard drive in my equium A60-155. I need to know what is compatible with this model and if the brand of the drive is important in compatibility. For example should be a drive hard toshiba or is it possible to others. Any help wou
-
Hello. I have my program works quite well in labview but when I build it, I'm having a problem. In bed software (exe), one of my screws will not work. Everything else works well. When I opened the front, it has a broken arrow and if I press it, I