My F4135 printer cannot scan and print from a copy

Similar Questions

• HP 8600 Pro: lines on paper printed from a copy

  I also have the mentioned lines previously, but with a slightly different twist. I can scan to a computer of the ADF or the drink with zero problems. When I COPY the glass and feel, it looks like I have the longitude on my copy. Fine, I can print. I can scan to a computer very well. I can't copy and print from the glass.

  I cleaned the scanner glass, I cleaned up the white plastic, I cleaned the short glass in front of the scanner glass. Variations null.

  If it's something that I need to replace I'm not sure it will be with a HP. This is my fourth all in one I have owned, and I did have problems with none so far. I am open to suggestions and if possible, an explanation of why I can scan to a computer out of the window, but when I copy the glass to print I get longitude. Yes, I scanned and printed with just a piece of plain white paper to make sure it wasn't some kind of copyright protection. I am at a loss for an explanation, but would like to hear the why of this...

  Hi @Photo8620,

  Welcome to the Forums of HP Support!

  I see that you are unable to copy from the glass of the scanner. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Usually, when you see this type of lines, it is caused by something on the glass a shadow. Because you do not get the lines during the scan from the scanner glass. I'm more inclined to assume that there is something else causing the problem. As the current or a firmware issue.

  Please confirm that you are able to scan using the scanner flat glass without producing lines.

  Follow the steps in this guide:

  • Vertical stripes, lines or streaks on Copies, faxes or scan

  I would like to do a hard reset to see if that will solve the problem.

  1. Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  2. Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  3. Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector).
  4. Try another outlet to current/piece.
  5. Try a different power cable.
  6. Try to copy a blank sheet of paper.
  7. What were the results?

  What operating system do you use?

  • Mac OS X: how to find which Mac OS X Version is on my computer?
  • Windows: How to find the Windows Edition and the Version on your computer.
  • Depending on the operating system you are using, click here to locate, download, and install the update of the firmware of the printer.

  If the problem persists and that lines when copying using the scanner flat glass. I have recommended to perform a reset complete semi. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Cannot scan to or from Mac to C4780

  I had problems to blur or no image when scanning. I used to use an option to scan HP on my Mac. But I updated the drivers for OS X 10.9.3. I have more drive full version.

  Help! You will need to scan some pictures and documents to be sent offshore.

  Thank you.

  Hi VegasMav,

  I want to help you get your Photosmart C4780 all-in-One printer scans to your Mac. I see that you are running the operating system new version Mavericks now. I'm sorry to hear you had problems of blur or not image when scanning. Let us ensure that you can scan first, then we can guarantee that your scan quality is satisfactory!

  Please open the following document. This document explains how to install and use the printer with 10.9. It also includes a frequently asked questions section which covers;

  • What happens if there is no update available in Apple Software Update driver?
  • What else do I need to know the Apple Software Update driver?
  • How to scan with the Apple Software Update driver?
  • What happens if I upgraded to the Mavericks of a previous operating system to Mac address?
  • What happens if I got an error trying to install an earlier version of the software of my printer?

  V10.9 OS X Mavericks: installing and using the printer on a Mac

  Please let me know the results of these efforts. Thank you. I look forward to hear from you.

• I created just scan and fax from windows. When I try to fax it always says line busy. I can receive faxes, but not to send them.

  When I send a fax, it connects then rang several times and then says line busy. I can hear the ring tone on the line, and this isn't a busy signal. I tried a few different numbers and I get the same thing. Can anyone help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

  Send a fax

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-your-computer-to-send-and-receive-faxes

  Configure your computer to send and receive faxes

  Read the info above from Microsoft.

  In addition, read the info on the links to these sites.

  See you soon.

  Mick Murphy - Microsoft partner

• Attachments and notes from a copy of an instance

  We want a split N allows to make copies of an instance to go to 3 different roles at the same time.
  When a role 1 person attaches a file, or creates a note other copies will be able to see it as well?

  When you add a note or an attachment to a copy of a division in 10g, the other copies automatically can see and edit the note or seizure. The reason is that the notes and attachments are actually added directly to the original instance and not the copy generated by the separation.

  You can try this yourself by downloading and import the project on http://www.4shared.com/file/119123762/849e0e1a/SplitWithAttachmentsAndNotes.html

  Note that this behavior works the same way for a Split, a Multiple (Split-N in previous versions) and a Split or. When the original instance exits the join, the original instance carries the notes and attachments added.

  If you're curious how copies or filed by divisions, multiple and splits refer to the original instance, read the last post on the thread in multiple split with DTA of the participant

  Dan

• scanning and emailing multidocument

  I use a s 6830 model HP laptop with Windows Vista op system Business and a model HP 6210 all-in-one printer, Fax, Scanner, copier. I'm having a problem scanning and e-mailing several pages of a document. Some of my recipients receive all pages OK but some receive only the first page. If I scan and email from several pages to myself, I get all pages, but another customer who just bought a new computer advise he gets only the first page. He also tells me that he gets several pictures of his family while he insists on the fact that there is something wrong with my computer. Is there a way I can set up my computer to send all copies of the scanned several pages to all recipients? Or is it something I could suggest to those recipients who are unable to receive several pages to properly configure their computer?

  Hi intrepid5,

  For more specialist on this question help, you can post your query on Office Forums.

  Office forums
  http://social.answers.Microsoft.com/forums/en-us/OutlookSend/threads

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 6700: Win 10 HP Scan and Capture will not install

  I'm trying to install scanning and Capture from the Windows store, but it hangs just for long periods of time to say 'work' and doesn't seem to install it.  I tried to restart, the store told me I had the app and can install it, but when I press the button install, it goes back to "work".  Any help?

  Hello

  Have you installed the software and driver on your computer yet? It supports only when

  NOTE: The correct HP drivers for your scanner must be installed from the Support of HP Web site.

  Kind regards.

• HP Officejet Pro 8610e: cannot print documents I scanned and saved as pdf files

  All of a sudden I cannot print I scanned and saved as pdf files.  I get a message indicating that the printer is "Impossible to convert the PostScript file.  Don't know how to handle, but I have to be able to print the docs I'm scanning and saving in pdf format.  Can someone help me?

  Thank you

  GTR

  Hi @GTR3,

  Welcome to the Forum from HP Support.

  I see that you are unable to print the PDF scanned documents with your HP Officejet Pro 8610 e-all-in-one printer. I would like to help.

  You are able to print any other format PDF on the Mac, or the question is just limited to your scanned PDF files? Whether the soft friendly PDF work with - Adobe Reader or Foxit Reader?

  In the meantime, I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Photosmart Premium c309g-m: cannot print from word and excel files

  Hello

  My question previous (25/02/2016 09:44) problems with the HP Solution Center has been resolved today - I can open the program and I can scan.

  But now I can not print word and excel files - the paper is completely empty. I can print emails from google, but they are difficult to read.

  In Control Panel, devices and printers, I have until now had a HP printer: HP0BAC44 (HP Photosmart Premium C309g-m) but now I also have the printer: HP Photosmart Premium C309g-m (Standard). Who would have something to do with the problem? I tried printing from two of them, but the result is the same as mentioned above.

  Can you help me please?

  Thank you

  Peter S.

  Hello

  Bought a new printer (Envy 5646), and all my problems are solved.

  Thank you

  Peter S.

• HP 6520: Cannot print from 2016, Word and PowerPoint 2016 but may leave Excel on HP 6520 2016

  Have charged the current driver... Can print from Excel 2016. But can't go to Word or PowerPoint-2016. Paper goes through but not print.

  Hi @Hopefully5,

  Thanks for getting back to me with this information.

  The first thing I would do is check the software and printer drivers. This can be easily done by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many software issues of print and printer.

  Please let me know if that solves the problem, or if you need assistance.

• How can I scan a document from the printer to my pc and find it once it is scanned

  I need basic step by step, I'm a newbee how scan a document from the printer to my pc and then find it once it is parsed on eprint D110 HP photosmart wireless

  Thanks for any help you can give.

  Press scan on the printer display, and then select the computer once scanning is finished it should open automatically with a default name for example scan001. If it's not automatically, you can find it in My Documents > my Scans

• Cannot print from Internet Explorer, I get the message ' in the script on this page' line 2107 and url://ieframe.dll/preview.js.

  Original title: cannot print in Explorer

  Hi, I have a new Packard Bell PC and everything was fine, then I ran an update and that he now refuses to print from the Internet Explore.  When I try and print it there is an error: 'in the script on this page"line 2107 and url://ieframe.dll/preview.js.  If I click Yes or no to the question application that it still does not print.  I have to lower the load and then printing that isn't always possible.

  Pins to the ie9 with 36 votes useful Forums:

  I get a script error when printing of IE9
  http://answers.Microsoft.com/en-us/IE/Forum/IE9-Windows_7/i-am-getting-a-script-error-when-printing-from-IE9/ce6e8366-8be9-4F86-92BA-cf6d172635e3

• HP DeskJet 3525 - how to scan and send the email from the printer without a PC

  Hello

  I would like to know if the printer HP DeskJet 3525 can scan and send by e-mail, by itself, without being connected to a PC. WiFi connectivity works.

  THX

  szekelya

  Hi @szekelya,

  I see by your post that you would like to know if you can scan to be sent from the printer display. I can help you with this.

  With this model, you can scan from the printer to the computer, there is no option for scanning to email from the printer.

  I have provided a document for how Scan: from the control panel.

  Here is a document for scanning the computer. Scan.

  Just select your operating system. There is a section for scanning to e-mail, via the HP software.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  If you need help, let me know.

  Good day!
  Thank you.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Incompatibility of printer Kodak 3250 reviews and cannot scan pictures

  Tite Originla: programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I am running Windows 7 and a Kodak 3250 printer that was working fine until recently. I get a finding of incompatibility and cannot scan pictures.

  Hello

  · What is the exact error message that you receive with error code if any?

  1. I suggest you to run the printer Troubleshooter and check if it helps. Reference link: open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

  2 remove the printer drivers and reinstall the drivers. Follow the steps below:

  a. click on start

  b. type cmd in the start search

  c. right-click on the option of cmd.exe and select run as administrator

  d. type: printui/s/T2

  e. opens the printer server properties page

  f. press CTRL + mouse click, and then select all the printer drivers you wish to uninstall

  g. Select Delete

  Links to install the drivers:

  KODAK all-in - One Printer Home Center software (including drivers) - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17138/selected/true

  KODAK ESP 3250 all-in - One Printer Firmware - WINDOWS operating systems: http://support.en.kodak.com/app/answers/detail/a_id/17438/related/1/selected/true