My firefox does not display the icon fonts!

Similar Questions

• Firefox does not display the changes on the site after the remote host; Refresh does not work

  I recently had to reinstall Windows 7 on my machine, and since it has been wiped off I installed CS5, reconfigured my Dreamweaver site and made changes to our page index.html (so far).  After you put the files on my remote server, I noticed that Firefox does not display the changes I made to this file - it is to show the page previously recorded on my CS4 version.  Thinking it was a cache problem, I emptied, refreshed/reloaded several times, restarted Firefox - nothing has worked.

  I checked the page in IE8 and all changes are not displayed correctly.  I used BrowserLab to display a preview in IE, Firefox (same version 3.6 which I use) and Safari, and all 3 display correctly version update of the page.  Visualization in 'live' of Firefox seems to be the problem, and I've looked everywhere for answers. Help is needed and appreciated!

  It is possible that you redefined the site incorrectly and put the files to the wrong address on the server. Carefully check both your local and remote sites definitions.

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• When you visit some Web sites, Firefox does not display the topic sites and sometimes the text correctly. It seems broken and unreadable.

  I reinstalled a new version of Firefox and set all of the default settings, but the problem still persists. Running Windows 7 and I have tried several different browsers (IE, Safari, Chrome and Opera) and all seem to work well. Only problem is with Firefox. The only time it works great is when I do not allow the site to use their own fonts. For any help or suggestion would be greatly appreciated.

  These sites use the Helvetica font?

  There has been problems reported with older versions of the Helvetica font bitmap or Geneva or fonts (bitmap) that Firefox cannot display in this size.
  
  Firefox cannot display some old bitmap fonts in a larger size gibberish and display instead.
  
  You can test in zoom out (view > Zoom > Zoom out, Ctrl-) to make the text smaller.

  Uninstall (remove) all variants of this not working do Firefox, use another font or see if you can find a version of real type that does not show the problem.

  There was also the fonts with a reported Chinese name who self-identify as Helvetica, in order to check that as well.

  See also /tiki - view_forum_thread.php? idforum = 1...

• Firefox does not display the URL selection window.

  About 30 minutes ago, I clicked on the update Firefox button (3.6.6) I clicked on restart when the update has been completed. The new page in Firefox IS NOT display a window to enter a URL or one of my frequently visited URL that I choose to. I rebooted by phone, but Firefox page does not appear always to a window to enter a URL or choose my URL of frequently used sites.

  This has happened

  Each time Firefox opened

  == I've updated today 7/16 Friday (Taunton, MY) about 15:30

  • If, under Windows, Firefox 3.6 the menu bar is hidden, then press on and hold down the ALT key, or press F10, which should make the "menu bar" appear
  • Go in "view > toolbars" and tick "Menu bar" with a click on it to make them permanent. See what happened to the file, edit and view menus?).
  • Make sure you have the "Navigation toolbar" and the "Personal bar" visible: "view > toolbars".
  • Is he missing elements then see if you can find them in the window "view > toolbars > customize.
  • If you see the item in the window customize then bring her back in the window, customize one of the toolbars.
  • So, in "view > toolbars > customize", you do not see this item and then click the button "Restore Default Set.

  See also back and front toolbar buttons or others are absent and controls, buttons and Toolbars Customize Firefox
  See http://kb.mozillazine.org/Toolbar_customization

• iPhone app does not display the icon during installation

  Hello

  We have developed an iPhone application using flash builder. We used the following icons of the resolution.

  <>icon

  < image29x29 > assets/images/x_29px.png < / image29x29 >

  < image57x57 > assets/images/x_57px.png < / image57x57 >

  < image72x72 > assets/images/x_72px.png < / image72x72 >

  < image114x114 > assets/images/x_114px.png < / image114x114 >

  < image128x128 > assets/images/x_128px.png < / image128x128 >

  < image512x512 > assets/images/x_512x512.png < / image512x512 >

  < / icon >

  The icon appears correctly in iTunes and also icon in the device after installation. but the problem is during the installation of the application in the device, it is show Virgin icon.

  The app is only specific to iPhone devices. for example,.

  < iPhone >

  < InfoAdditions >

  <! [CDATA]

  < key > UIDeviceFamily < / key >

  < table >

  < string > 1 < / string >

  < / array >

  []] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  Please help me how to display the icon during the installation of the specific application of the iPhone.

  Hello

  The icon is not displayed during the installation of the application of the ad hoc package. Now, we have published (same code game) app in the Apple iStore and no problem icon with the distributed version (the application that's iStore).

  Thank you

  Chandrashekarreddy Muthumula

• Firefox does not display the Images selected from the Google search results!

  I'm a recent new user of Firefox, since my IE8 on XP does not work with certain sites.
  I am now on Firefox 25.
  Firefox has a couple of mixed content settings, and in fact, some changes have gone with 25 who has been registered to be in 24, but was not (I read).

  Anyway, my IE8 and IE9 on Windows 8, I believe, have a warning that appears in a box when I go to a web page with mixed content, so I can decide whether to allow the display of mixed content, and I make the judgment, if I'm on a bank or other secure site, etc.

  This mixed content WARNING CHOICE seems to be missing in Firefox, and I'm surprised!

  In any case, in Firefox 25, mixed the active content is blocked, and when I do a google search on '2014 Nissan Rogue', successes were few images called images.
  When I click on any of these images, a blank page appears, with no way to allow the image to display. Help!

  Looks like 25.0.01 that came out a few days ago has fixed the problem that existed in 25 delivered a few weeks before. Thank you!

• 12 Firefox does not display the favicons site by url bar constantly, how to fix?

  I am a webmaster so I have access to insert icon into a joomla website, the pages all have
  < link rel = "shortcut icon" type = "image/x-icon" href = "' / favicon.ico" / > "
  adding anyway since it is a Joomla 2.5.

  icon shows ok for domain name page which is a simple index.htm, without the code above! but no favicon for all
  domain name/index.php page... even with the code added above.

  bookmarks newly taken on the pages of the site are empty favicon too,

  pre-upgrade bookmarks are kept as any favicons of websites you visited before upgrading to v12

  How to fix the blindness to the site favicons?

  as far as I know it's a 16 by 16 pixel favicon, it was produced in line.

  I have no problem with seeing favicons on three sites in your PM on the tab bar (future versions of Firefox 14 + will not show the favicon on the address bar).
  
  They all send in the Content-Type: image/x-icon by the server.

  I note that there are two different favicons for the first two links you provide.
  Your page code specifies /templates/pulsar/favicon.ico (a star shaped icon; Content-Length: 1150), but there is also an another favicon (Content-Length: 894) in the folder root of the site that seems different.
  
  I do not know which favicon you intend to show up (Firefox displays the star icon specified for me).

  No problem with the S-shaped icon on the third link either.

  You can try to use the Live Http Headers extension to check if there is a demand for the favicons and the sending server response.
  
  You can also check out the tools > Page Info > media to check if the favicon shows up.

  You can make a standard test for problems with the images.

  Is he missing pictures then make sure you are not block images from certain domains.

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  Make sure that you do not block the images of third parties, the pref permissions.default.images must be 1.

  • http://KB.mozillazine.org/Images_or_animations_do_not_load

  There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox does not display the pages correctly.

  Images are not displayed. It works if I start in safe mode, but I don't know what extensions or plug-ins is causing the problem. Tried to uninstall and reinstall, but all the same plugins and extensions are always there. I can't remove the extensions or plugins.

  Have you tried disabling hardware acceleration?

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Firefox does not display the printable credit card statements

  I get paperless credit card statements and I always print a summary of one page of the statement. I access my credit account and select view/print statement. It appears in PDF format, but Firefox shows just a blank page. There is no error dialog box. If I followed the same procedure using Internet Explorer, it works very well. This happens with my Visa and Discover cards. My current version of Firefox is 28.0. The operating system is XP and this is the current version with all updates installed. Sites secured for two credit cards work fine. I can view my statements OK, but cannot view the printable version of the statements. Why do IE, but not Firefox?

  Dave W

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  But it also might make you Windows xp support has ended. But try this first.

  This solve your problems? Please report to us!

  Thank you.

• 9.0.1 Firefox does not display the entire Web page

  The latest version of Firefox has developed an intermittent bug on my desktop computer. Especialy after a full stop, the program stops displaying many, but not all, the content of the Web page on most Web pages. Drop-down menus and buttons in the sidebar seems particularly prone to this problem, but large chunks of main content also fails to display on most Web pages. It's as if the page only partially loaded, but the loading process has effectively ceased.

  Uninstall, reboot, and reinstall temporarily solves the problem. but it comes back.

  Follow the suggestions mentioned in the following articles:

  • Clear the Cache and Cookies
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Check and tell if its working.

• put a press photo card in a slot SD/MMC-MS/pro does not display the icon of the use of the slot. any idea will be useful.

  After the entry of a multimedia card in a slot SD/MMC-MS/Pro, does not show on the taskbar. When I got here how I stopped it to remove safely.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can follow the instructions below to eject your SD card safely.
  In Windows Explorer, right-click on the drive letter for the SD card, you want to remove and select Eject.

  You can also consult the suggestions provided by Kevin D Souza responded on 23 June 2013 and check if this information helps:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/safely-remove-hardware-of-SD-card-disables-card/0a5641af-8b55-4C3E-9ddc-158f877e3631

  See also the advice given by guenoun in the thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/safely-remove-hardware-icon-missing-and-cant-eject/e9fda0a2-C308-4853-BF1D-a3926ff0fcd1

  I hope this helps. Just reply with the results.

• My screen does not display the icons, when I start standby or hibernation. Make it unusable.

  I have a new desktop computer with windows 8. When the computer goes to sleep or turns off, and then I press a button to turn it back on. Desktop does not show icons, rendering it useless.

  Hi Mike,.

  Thank you for bringing the matter to our attention.

  You said that you get not all icons when you start the computer after the sleep or Hibernate mode. We need more information to help you in a better way.

  1 you did all the software and the hardware on your computer changes?

  2. What is the brand and model of your computer?

  3. do you get an error message? If Yes, what is the error message?

  4. When you say that there are no icons, it is a black screen?

  5. are you able to see the icons when you restart the computer?

  Please, try the following steps and check if that helps resolve the issue with icons.

  Method 1: troubleshooting to be able to run and check if this help.

  a. press Windows + W on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click Power, will new popup window.

  e. follow the instructions on the screen.

  Method 2: try to start the computer in safe mode and also check in the boot.

  Step 1: Try to start the computer in safe mode and check if you still face the question.

  You can check the link below

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  Note: Please restart the computer to start in normal mode after a repair.

  Step 2: Try to clean boot and check if you still face the question.

  Please see the link to start the computer in a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to start your computer in normal mode by following step 3.

  Method 3: Run SCAN SFC. To run SFC / SCANNOW Please follow steps.

  a. press the Windows key + X, and then click command prompt.

  b. type the command: sfc/scannow , and then press on Enter.

  c. restart the computer and check.

  Note: The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

  I hope this helps. If the problem started after the "standby mode", please get back to us. We are here to help you.

• Monitor does NOT display the icons on Start Up, after the fashion 'sleep', etc.

  I recently bought my computer (last Monday) and the monitor turns on so I can see the wallpaper. However, no icons appear! If I unplug the monitor from the power supply and then plug it back it, is! the icons!

  I wanted to post here before contacting HP, because it can be a quick fix and I can't sit on the phone for who-knows-how-long.

  I have the HP p7-1234 and the monitor model number is HP2011-xi. I have Windows 7. Any help would be appreciated.

  Thank you!

  So... Guess what I learned?

  How many cables you have plugged into your monitor?  All came with a white and blue, and I connected the two.  Apparently, this causes the problem, as the two cables are designed to provide both screens.

  Disconnect the blue wire from the computer and the monitor, and then press the "Windows" key with the letter p at the same time.  Make sure 'computer only' is selected in the pop-up window, and then press ENTER.  This, according to an HP support technician, should fix the problem.

  The instructions should make that more clear that the two cables must not be connected on a single monitor, but it can also be common sense for those who have experience with two monitors.

  I've yet to leave my computer unattended to see if that solves the problem, so let's keep our fingers crossed.

• InDesign CS4 does not display the icon in the shape of triangle for the images changed into links

  My InDesign crashed the other day and now it gives me is no longer the yellow triangle icon in the links Panel to indicate that image has been changed and must be updated. I generally do not connect the image to the original through Indesign, but work independently in Photoshop. This has never been a problem. After that I updated the image in PS, the triangle appears instantly in ID in order to be able to click on it and update the image.

  I can always click on the Refresh button to update the image, but I wish that these rear indicators because it helps me with older documents - so that I can know what are the images really need to update and which are not.

  I restarted the Panel and launched and closed the bridge such as suggested in other older discussions, and he has not made a difference. I also noticed that if I try to open the original image by ID with open with, the icon for the PS, for example, doesn't think I'm in PS (it opens the image in Windowd Paint). It makes me wonder is the whole connection between ID and PS is messed up. How can I correct this connection?

  Have you tried to delete your preferences?  How it is here.