My guest can not see the host or cannot communicate with the network, networking is set to bridged, host operating system is Windows XP sp3

Similar Questions

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• VMKernel can not see the network...

  I have 4 NICs, 2 NICs service a vswitch with a service console and VMkernel a.   The service IP console works fine but I have no network connectivity for the VMkernel on the same vswitch with a static IP address.  If I set the VMkernel for DHCP, it gets an address of 169.x.  esxcfg-switch - l & esxcfg-NICS - l show no problem.

  Hello

  It seems the two network adapters that you use with that one VLAN configured on the pSwitch.

  • Try to configure vSwitch with a single NETWORK card, which saw Service Console PortGroup and confirm the S.C having connectivity

  • UN-Link the NIC of the vSwitch and add the second NETWORK card and confirm the S.C with connectivity.

  If you have a connectivity on both network adapters, and then in the pSwitch problem seems to be.

  • Troubleshooting above with VMKernel PortGroup and confirm - there is connectivity to the other host via the vmkping command.

  • If doesn't work then be sure to there is a circuit in the pSwitch or not.

  • If you have chutes, make sure the tag pSwitch Port.

  • Put the VLAN ID in the VMKernel PortGroup.

  • Put the VLAN ID in the Service Console PortGroup

  If you are not sure, connect two VMKernel network cards to a crossover cable and try the connectivity tests.

  Best regards

  Hussain Al Sayed

  If you find this information useful, please give points to "correct" or "useful".

• Hi, just sign for a package monthly, received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I connect.

  Hi, just sign for cloud of plan monthly photoshop, has received a message from the Bank that I already paid with my credit card for the first month, but I received no email / can not see the plan when I open a session.

  There is no serial numbers for products Creative cloud,

  Sign out of Creative Cloud App and sign in the back once

  http://helpx.Adobe.com/creative-cloud/KB/sign-in-out-creative-cloud-desktop-app.html

  If the trial warning still appears, then make sure your hosts file once entries

  Log, activation, or connection errors. CS5.5 and later versions

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.

• Can not see the images of the patent (i.e., D/359 691) on research of patent USPTO.gov, it tells me I need a plugin (7.7.1.0 Quicktime) that I've already updated.

  Can not see the images of the patent (that is, D/359 691) on USPTO.gov patent search, it tells me I need a plugin (Quicktime) that I've already updated.
  In the 'quick search' I give terms & it compiles a list. I have then cross to every doc and look to see the doc and associated drawings. I don't know what to say at this stage.

  Thank you.

  QuickTime cannot handle images in TIFF format.

  You can watch AlternaTIFF - http://www.alternatiff.com/

• Hi I can not see the App health or my pulse in the looks on my watch even if she is selected to appear on eyes on my phone?

  Hi I can not see the App health or my pulse in the looks on my watch even if she is selected to appear on eyes on my phone?

  Hello

  Slide your finger left or right on the screen.

  Also go to ibooks on the user guide iphone download Apple Watch is free.

  See you soon

  Brian

• Import photos no problem can not see the photos on iPhone

  I upgraded my MacBook Pro to El Capitan.  Since moving from iPhoto to Photos (even before I updated the operating system) when I plug my iPhone 5 to import pictures in the selected library I do not see the photos appear in the import window so that I can select for imports.  I literally had to email it to myself, and then import it into the e-mail.  I work with different libraries within pictures, so I excluded it only love the library system.  Same result, can not see the photos.  Also, I have unplugged and replugged in and tried the other USB port to rule out hardware, while the Photos could force them to see the device as new, and that does not work either.  I tried something another user who had to open Image Capture to see if she could see all the pictures on my phone and it doesn't work, I found (theory was that opening would make Photos recognize as well).  However the Image Capture wouldn't add a USB scanner so I think it's not worthy of trust.  Photos only setting I have enabled is the automatic update to iCloud.  Otherwise, I don't know what another parameter to seek that could block it.

  When the phone is connected USB the phone reboot - many have found this will clear this problem

  LN

• can not see the BTH003 on my Qosmio laptop bluetooth headset

  can not see the BTH003 on my Qosmio laptop bluetooth headset

  Hi koko,.

  Welcome to the Microsoft Community Forums.

  According to the description, it seems that you are facing problems that Bluetooth headphones are not detected. I'll be happy to help you with this problem.

  (1) what is the exact error message / complete you receive?

  (2) what operating system is installed on your computer?

  (3) what is the brand and model of the Bluetooth headset?

  (4) have you made changes on the computer before this problem?

  I suggest you to follow the steps from the links and check if it helps.

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• BlackBerry smartphones can not see the maps on my "BOLD"?

  Hello

  I just theBold on Orange in the United Kingdom and I do not see the maps app anywhere.  I can see it listed as version 4.6.0 under the list of Applications but can not see the software somewhere?

  I'm mean't to enable it somehow?  Also can not get the GPS function works as it says "failed to update GPS location" when I click on refresh?

  Any help would be really welcome

  If your provider blocks the passage of the icon (like AT & T) to another theme (Options-> themes) and see if you can find it. You may also download. Check mobile.blackberry.com from your BB browser.

• I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  I get an error message of complete storage - please backup and remove your something online (can not see the full error message) when converting PDF reader to point rower inacrobat DC. Help, please

  Hi debg25514049,

  You will not be able to export your PDF to PPT using the service Adobe export in PDF format.

  You'll need subscription to pack Adobe PDF or the Acrobat application to convert PDF to PPT.

  Kind regards
  Nicos

• When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image

  When you try to crop an image in Lightroom develop I get a blue screen of overlay and can not see the image. I uninstalled and reinstalled but same result. How can I get this reset to display the selected image and handles of the crop?

  Go to your Lightroom preferences, the performance tab and uncheck the box "use GPU processor."

• Can not see the Spot Healing Brush Touch tab. Shows only the tab for the corrector.

  Can not see the Spot Healing Brush Touch tab. Shows only the tab for the corrector.

  Try right-clicking on the Healing Brush tool in the bar of the tool or SHIFT + J to switch tools...

  

• Can not see the whole clips on DVD

  Hello

  I recently created a project and it was engraved on a DVD. I can view the DVD very well, but can not see the entire width of the clips. I can see the entire width of the clips during playback on computer and TV. Any help is greatly appreciated.

  Is the DVD 4:3 or 16:9 wide screen? What type of display you're displaying on - an old 4:3 CRT or a screen flat 16:9? What image is missing? Some televisions show a picture of overscan, part of the meaning of the image is lost under the bezel, unlike most computer monitors showing each pixel on the screen.

  Thank you

  Jeff