My hard disk crashed - I have questions about the network now.

My hard drive crashed on the computer that was the computer on which the files shared.  We had a T: climb together on this computer where we recorded the files and programs that we wanted to share.  My questions are this... We have replaced the hard drive on this computer.  Do I need to set up the drive w: in this computer once again, on the other computer as well, since I'm not there, and if so how do I?  Thank you.

Hello

Yes, you must redo the sharing.

Most of the network news are stored on the system which is located on the drive crashed, and now he's gone.

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • Re-Setup: Educational Version of CS6 after the hard disk crash. Serial number of the access problem.

    I have an educational version of Photoshop CS6. I had a hard drive crash and you need to reinstall the product on a new drive. I received original, the original CD and a product code. How can I get the serial number? Although I register the product when you buy in 2012, when I connect with my Adobe ID there is no trace of the recording. I can't all talk to him on the phone, and the adobe Web site is a nightmare that is enough for me round in circles.  Someone please offer advice on that.

    Hi hemdani,.

    Please see the download link for Photoshop CS6 below.

    Download link: download Creative Suite 6 applications

    We also have you sent an email with the serial number on your registered e-mail address.

    Hope that helps.

    Kind regards

    Mohit

  • I have questions about the use of Microsoft Windows for computer repair purposes...

    I'm about to start a computer like Geeksquad repair business. If I need to re - install Windows on computers is a specific copy, I need to get Microsoft for use of technician? I want to make sure I'm following all the recommendations of Microsoft.

    Hello

    I suggest you to post your questions in the TechNet Forums for a better answer.

    http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  • Photoshop CS2 began to have questions about the other windows.

    About 2 months ago, I started to notice that Photoshop CS2 has started to have problems with me open or do it before all other windows, such as Explorer or Chrome for example. This is what my PS normally looks like:Clipboard01.png

    and if I try to bring another program, it will act as if I clicked on the start bar and the PS is more picked up (you have to click the program again to interact with him)

    Then when I go to color/clear/do almost anything on the Web, my tools will vanish like this:Clipboard02.png

    and reappear when I click on the gray background of the PS window. They may not be disabled.

    Sometimes, and I don't have a screenshot because I can't reproduce right now, the new program (Chrome, Explorer, etc.) is displayed, but the windows tools will remain.

    I dealt with it for a while, but I would like to first of all streaming my art and I won't continue to happen. I like to use CS2, so please don't recommend just other programs unless it is just absolutely not repairable.

    I ran CS2 on this computer since September of the year last with zero problems, so I don't know why it started

    Thank you, I'll check the wire, but I tried to reset my default preferences, and that seems to have fixed.

  • Questions about the network resource class.

    I am running Windows 7 Enterprise x 64 SP1.

    In Windows Explorer, if I click on 'Network' in the navigation panel, it will browse the network and show me resources available network (see photo).

    The resources are grouped into categories, such as 'Network infrastructure', 'Media Devices', 'Storage', 'Computers', etc.

    I have two network storage devices: one of them is Western Digital MyBookLive (host name is "MyBookLive"), the other is QNAP TS - 469 Pro (host name is "QNAP").  I can access both by UNC (\\MyBookLive\Share, \\QNAP\Public, etc.).

    I noticed that 'MyBookLive' shows in the 'Storage' category, which is the desired behavior.  But "QNAP" shows as "other devices."

    My question is - how does windows rank network resource?  How does Windows know if a resource is 'Storage' vs 'Network Infrastructure '?

    Thank you very much!

    Hi Mihcael,

    Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet forums.

    http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

    Hope this information helps.

  • I have questions about the backup of Windows 8.

    Original title: backup of Windows 8

    Hello, I have two questions regarding windows 8 backup (office). I just bought a new laptop hard drive WD to use for the backup of my computer. Until I plug it to my computer, are there recommendations on what to do for any software that could be on this drive. In previous portable drives that I used, when I plug in they usually form any software that is used for the default backup. According to me, a mark was memeo. I would avoid any conflict with the windows backup software that is part of windows-8, so I ask for advice before I plug this new drive.

    The second issue is that I probably backup my computer so that I can do a clean install of my OS of windows 8. What is the best way to prepare my hard drives so that I get the best possible instillation? The instillation of my previous is considered to be defective and I don't want to wear one of these errors in the new instillation. It would be appreciated also all the tips on how to deal with the backup for this project and transfer my files on the computer. Uses the best utility to backup windows to do this, or is there another type of software I should use? Thank you.

    Salvation of the brain,

    Thank you for the update.

    In case you experience other problems with Windows in the future, feel free to post your request here on Microsoft Community Forums, we will be more than happy to help you.

  • Have questions about the stop "". HPCMPMGR ". EXE"does not, as CCSVCHST. EXE - does not

    Is there a way to correct these mistakes with out having to rebuild the entire machine? Causing sytem and performance problems crashes. Thank you

    Visit this link... http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=OJ-22424-5

  • I have a question about the network configuration

    Hello

    I'll set up a network with 8 computers. My logic is correct?

    I have an internet connection by cable to come in the main office. I was going to plug the BEFSR41 "Router EthernetFast cable with switch 4-port" to the internet. Then plug 3 computers and an ethernet cable that relate to an EG008W "Gigabit 8-port Workgroup switch". Then plug the remaining computers to the EG008W.

    What is the correct procedure?

    Thank you

    Greg

    Thank you!

  • We intend to upgrade little welcome vpshere 5.5, I have question about the license

    Dear team,

    I just want to understand, we have 10 esxi host runing esxi4.1 now we are palnning to upgrade the two esxi host at 5.5U1 or U2.

    4.1 license will be apply to 5.x host?

    can we share license 4.1 with 5.x host?

    do we need to buy a different license for host 5.x?

    need your urgent help

    concerning

    Mr. VMware

    This 4.x licenses can be applied to a version of the host 5.x, in this way, you have two options:

    1 move licenses 4.x to version 5.x on MyVMware agreeing with the link I provided in the previous post, the host upgrade to version 5.x and apply this license upgrade;

    2. upgrade the host to the 5.x version and this host in 60 days and before the 60 days trial mode expires, apply licenses for version 5.x.

  • Newbe question about the network configuration of ESXi 3.5

    I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

    I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

    My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

    X vmnic0 embeeded nic1

    NIC2 integrated vmnic1 used by vswitch1

    I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

    Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

    vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

    Haven't you set up this? If this isn't the case, I would get with one who did.

    Order "the great vSwitch debate" parts 1 and 2 to start.

    http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

  • A question about the network card set

    Hi all

    In the vSphere Client, I can not change the type of a network card. But with PowerCLI, in case of power off the power of virtual machines, I can execute the following line:

    get-vm <virtual_machine_name> | get-networkadapter | set-networkadapter -type "vmxnet3"

    Is it correct method to change adapter type? (I need to keep tha MAC address)

    When you change the type of NETWORK card, Windows treats it as a new device.

    You will have to redo all the IP settings on the map 'new '.

    The easiest way is first get IP parameters, with the Get-VMGuestNetworkInterface cmdlet.

    Then change the type of NETWORK adapter and then redefine the IP parameters with the Set-VMGuestNetworkInterface cmdlet.

  • Try to reinstall my original Adobe CS after a hard disk crash need help, download again doesn't accept serial number CS?

    Hi, I'm late to the game here, I am trying to reinstall my original Adobe CS after a hard disk crash.  I know that the activation server has been stopped, so I went and downloaded the CS2 version that doesn't require activation.  The problem is my serial number CS is displayed as invalid on the CS2 download, can someone help?  I saw not just a download CS anywhere and their cat had is shown to be completely useless as agent just brutally told me time and again «we don't support that more»

    CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    .

    You MUST use the special version and the serial number on the page, not your original drive or serial number

    .

    NOTE that CS2 will not install on a "modern" with an Intel Mac

    When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

  • Questions about the Windows Feedback program Fullfillment

    When will I know if my fullfillment of windows feedback program is over, that I have installed on my PC?

    Hello mpic16,

    If you have questions about the Windows feedback program, you will need to respond here.
    https://WFP.Microsoft.com/welcome.aspx

    You can send an email to: * e-mail address is removed from the privacy *.

    They would be better able to answer your questions and concerns.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Factory installed Windows XP OS on a Dell laptop and have a hard disk crash. How can I reinstall windows when there is no CD?

    Factory installed Windows XP OS on a Dell laptop and have a hard disk crash.  How can I reinstall windows when there is no CD?

    Order Dell backup discs for the specific Dell computer model you have. Carey Frisch

  • A few questions about the defrag and hard space as I get a notification saying my hard disk space became full of drive

    I have problems with my hard drive. I got a notification saying that my hard disk space became full. So I cleaned a lot of programs and files of the irrational. I've freed almost half of it. Then I had another notification a few days later and realized that I had less than 1 GB of free space on my hard drive 600 g. I cleaned more and went to defragment my disk. It is set on a calendar, but I don't think that he has never been defragmented. He ran for about 2.5 days until the cord is unplugged and the battery is dead at 91% consolidated. Do I have to start again and wait again 2.5 days before I little hard drive space open? Or progress in the early days of 2.5 will remain défragmentée? In addition, defrag and do a disk cleanup will stop my hard drive to fill almost instantly after deleting and uninstalling programs? I'm running out of things to remove and I am a full-time student full and really need a computer in operation, please help!

    Defragmentation is complete, will continue from the left point last time. Therefore, if you raise, he will continue that 91 percent (of course, it will start from 0%, but the scan will go up that 91% and continue with the rest of the space on the hard disk, that 91% of surface of the hard drive has been defragmented already).

    Yes, you can delete all the files inside the Temp folder. TEMP folder is a temporary storage place used by some programs to temporarily store the files/folders. Some programs remove the files/folders after working, but some retain them, causing space problems.

    You can use disk cleanup, on occasion, to delete unnecessary files from the hard drive.

Maybe you are looking for

  • Toshiba virtual Store account Reset - 33012

    Hello I have created a personal account Toshiba today and after updating the app, I get white screen... Help, please... Personal account 33012

  • HP 1513: problems for drivers installation

    Hello! I have Windows 7 64 and printer HP 1513. Program and I wanted to update the drivers for my printer. Downloaded from the HP Web site for the latest driver, started installation, but there is always a message: hrzpr40.exe file not found. What sh

  • Adding an e-mail link in my signature in Windows Live Mail

    I have a signature in my Live Mail in which I would like to have an answer email ([email protected]***) such that when it is clicked on will open a new window of outgoing mail.  There be an easy way to achieve this.  I appreciate your help.

  • BlackBerry Bluetooth of Q10 streaming audio question

    When my Q10 connects to my deck (shortly after I start the car) the phone connects to the car without problem. I can make calls, receive calls, etc. - works flawlessly... BUT when you use streaming audio, either through BB Media Player or neutrons MP

  • How do would you recycle HFM

    Dear experts,I read somewhere that the HFM recycling procedure is the following:1 - Stop services HFM2 - kill process cassecurity.exe hsvdatasources.exe and other HFM taskmgr exe3. perform an iisresetHowever, 2 and 3 are manual steps and my client is