My high interest reading Test failed

Similar Questions

• Hardware diagnostics: "SMART short Self Test - failed" and "targeted read Test Failed.

  Original title: "SMART short Self Test - failed" and "targeted read Test Failed", all the patches?

  When using PC checkup of Dell I get the following errors; during the analysis of the material. "SMART short self-test - failed" and "targeted read Test Failed", all the patches?

  Hello Duane,

  Teke section of the Web site that speaks of similar problem.

  http://forums.techguy.org/hardware/906455-smart-short-self-test-fail.html

  The problem is with the hardware and you can get in touch with Dell computers.

• Targeted Read Test failed [error code: WHD16-CSB]

  I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)

  The unit has reported the following State: the previous self-test completed having the read element of the test failed.  The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)

  Please help me find a solution.

  The reader is 23398 market h years.  Thats 974 days or years 2.67.   If the drive is probably dying if not dead.

  Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.

  The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
  you do not have a retail receipt.

• Hard drive failure: targeted read Test failed, SMART short self test FAILED

  Suddenly, I get this popup to My Dell saying that my computer has failed two important tests and the hard disk failure is imminent. It scared me so much I almost fell of my computer Chair, so I came here to help... my computer is a Dell Inspiron 15R 2012 5520 and error codes are:

  

  I saw the other topics on this, but just in case, I wanted to do this one. I'm really afraid that all my files will be lost, because I don't have anywhere to store up to. I tried the cloud, but my connection is not good enough and it is really slow and sometimes just will not work. Also, sometimes when I press my ear to the laptop, I hear a soft grinding, which I guess was the failed hard drive. I don't think I've heard that noise before, but he could have been there since I bought the laptop.  Any help would be greatly appreciated.

  UPDATE: I ran CHKDSK and it only took a few seconds for him to know that my hard drive is fine, although my Dell seems to think otherwise. What should I trust?

  4590 X

  You will need to replace the hard drive failed, followed by reinstalling windows.

  If there is a warranty from Dell, contact Dell technical support for replacement drive, no guarantee, you will need to purchase a laptop SATA, 9.5 MM x 2.5 "hard drive.

  With regard to the recovery of the data files and folders, you can try attaching the failed hard drive to another system that works using a similar to THIS USB adapter and see if you can transfer files and folders.

  Applications and programs need to be reinstalled from their records, or downloaded from the website of the Publisher.

  Bev.

• Dell Latitude c400 laptop IDE Disk/IDE reference check tests fail

  Hi, I'm not a technical expert, but a student of the University 1 forty years. I hope someone can help me. My laptop was fine when I went to bed, when I woke up it was a blue screen with a message about it. with something like the checksum does not match, I ran the diagnostics tree test and the results were:

  IDE Disk Read Test Fail - Error Code ofoo:0244 message block-24794619

  IDE Verify Test Fail error code: ofoo:1 A 44 message block-24794619

  Floppy drive has a line - 1100:012 error Code

  My friend tried to re start for me using an external disc drive, but can't the words show drive not executionable. the external hard drive, I borrowed was a yamaha.

  Thank you for your time: womansad:

  
  

• Targeted Test read and Smart short self-test failed!

  Help, please! Is there something to fix the underside of chess? Product: XPS 435 t/9000.  Western Digital: WDC WD5000AKS-75V0A0. The crash occurred after that my Tripp-lite didn't work properly in a power failure. Targeted reading test
  Test started		17/09/2013-09:22:13
  Error message:	Error reading sector 27214298.	17/09/2013-09:22:34
  Error message:	The test found errors in sector 1.	17/09/2013-09:22:34
  Completion test:	Failed (error code: WHD20-B3A)

  Short what SMART self-test
  Test started		17/09/2013-09:25:03
  Error message:	The unit has reported the following State: the previous self-test completed having the read element of the test failed.	17/09/2013-09:26:15
  Error message:	The first default LBA value is 27214298 and the failure occurred after that the device was working since 13979 hours under tension.	17/09/2013-09:26:15
  Completion test:	Failed (error code: WHD16-3DY)

  Jan

  It is likely that you will need to replace the hard drive.  To confirm, press F12 at startup, enter the Dell diagnostics.  Run an extended hard drive test.

  If the system is under warranty, logs the error and contact Dell for a replacement drive.

  If the system is out of warranty, any standard 3.5 "SATA drive will work as a replacement.

• SQL Developer: Failure-Test failed: IO error: got at least one by a CA read

  SQL Developer: Failure-Test failed: IO error: Got minus one since a call to reading
  
  Hello
  
  I'm sorry I know this is probably more frequently asked question, but I have no idea what I should get.
  I looked at the error message above to see if I could find a solution, but unfortunately I do not have.
  
  Right let me start with I'm a Total Noob... Well it terms of having to install Oracle 11 g myself.
  In my University they welcomed a database and we assigned to a user & pass it's how I was using SQL Developer,.
  but since I'm no longer a student at the University. I need to use the Oracle database.
  
  So I downloaded Oracle 11 g Enterprise installed on my laptop that I don't use much.
  Name of the database: Christiane
  
  It of the entire facility and seems to have succeeded, I went https://localhost:1158 / em (although not sure why em? what's the deal with that?) I thought that it would be Https://localhost:1158 / Christiane) anyway...
  Connected with the user of the System .
  Went to users and creates a named user: RUDUHR
  
  Thinking Yes its not work... go my other laptop open SQL Developer.
  
  Connection created with the following settings
  Name of con: RK
  User: RUDUHR
  Pass: TEST
  Con type: basic
  Role: by default
  Hostname: 192.168.0.8
  Port: 1158
  SID: Christiane
  
  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.
  
  I even tried to use SYSTEM user to connect, but same error
  also tried to change the SID to em, it made no difference I get the error message status: failure Test failed: IO error: Got minus one since reading call
  
  So are am clueless... LOL I only know how to create tables and stuff not how to set up a database.
  and just to let you know that I transfer the port on me correct portable router.

  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.

  It's because you read the documentation.

  1158 is the default port for Enterprise Manager
  1521 is the default port for Sqlnet.
  Your port number is incorrect.

  Of course, you can create your tables in EM too.

  As by the Forums of the label of the post (first link when you arrive at this page) it is recommended that read the documentation before asking an another Doc issue yet.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• SMART short test failed

  Under hardware Maintence diagnosed and he tells me that the SMART short Test failed what it means and how to fix this

  I think that trying to DEFRAGMENT a hard disk 'default' is the wrong thing to do.

  Compare to the conduct of a dirt road with Bald tires - while the Bald tires may be OK on a dry, paved, road between them work "hard" will result in a failure of the tire.

  Similarly, many files on the hard drive when it is expected to be soon to fail, is also a bad idea.

  Any small computer boss store can sell you a hard drive brand new and may try to "clone" of 100% of the hard drive of the 'old' drive on 'new' disk

  Price?  It depends on the capacity (250 GB? 500 GB? 1000GO? 2000 GB?).

  About US $100, you will have a new disk drive with a capacity greater than your current drive.

  Add $50 to $100 US for the technician:

  Open the computer case,

  * Check the physical size and the capacity of the old-disk drive, to recommend a "compatible" replacement

  * Fix temporarily the new discs,

  * run the software "-disk cloning."

  * delete the old records (and he will give it to you, so that you can literally hammer it, so that no one will ever be able to read one of your folders – think 'security'),

  * connect permanently the new disks.

  * close the computer case,

  * test it.

  It also depends on the "age" of your computer.

  If it is still running Windows XP or Windows Vista, it will be over ten years - REPLACE a computer of this type.

  rather than spend more than US $150 to keep until something else died of "old age".

• SMART extended self test failed

  Is this what can I do to repair my disk hard when diagnostics the system returns this error message?

  The read element of the test failed (error code: HD521-3W)

  Is there available utilities to diagnose the problems of internet connection on HP?

  Thanks for any help anyone can give me.

  Michele

  Unfortunately, the result of this test tells you that the hard drive has failed, you will need to replace the hard drive.  You can save your data by installing the drive on another PC using one of the spare hard drive SATA connections, if it is a SATA or IDE secondary connector if the drive is IDE and try to read the disc in windows, but it depends on how much the failure of hard drive is. The reader may not even be readable.

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• I spent my evening together on this: status: failure Test failed: ORA-01017

  Hello my friends!
  
  I do not know why this error pops up, but it's here: status: failure Test failed: ORA-01017: name of user and password invalid; denied connection+.
  
  Oracle works well but I can't get SQL Developer to play ball (log in). I have not used the 32 no chance and I tried 64 with the JDK, no luck.
  
  What did I try?
  
  * 1. Google search for hours
  * 2. Tried more than 50 proposals *.
  * 3. Uninstall / re-install *.
  * 4. Change password box *.
  * 5. Check the operational database and listener has the right name in it.*
  
  I read an article about password being truncated box so I change the case.
  
  I read hundreds of threads.
  
  Does anyone know how can I fix?
  
  
  I thank everyone!
  
  
  JMan

  Just what gave you the idea that a computer name is a user name?

  Try the system.

  And I suggest you to read some documents.

• The user equivalence test failed for user 'oracle '.

  Hello
  
  I try to install the Clusterware Oracle 10g as part of my RAC installation.
  I have configured in RHEL 4 to 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the error below:
  
  [oracle@rac cluvfy] $./runcluvfy.sh stage pre - crsinst - rac n, rac2
  Conducting due diligence to install cluster services
  Audit accessibility of node...
  Check for accessibility of node is passed node "rac".
  Verify the equivalence of the user...
  The user equivalence test failed for user 'oracle '.
  The test failed on the nodes:
  RAC
  CAUTION:
  Equivalence of the user is not defined for nodes:
  RAC
  Audit will proceed to nodes:
  Rac2
  
  The problem is that with the first node (rac). The second node passes.
  SSH works fine. Don't know what the problem is!
  
  Thank you!

  Have you set up SSH for the equivalence of the user?
  Or
  Did you establish the user equivalence?
  If Yes... Please check...
  $ ssh hostname rac
  RAC
  $ ssh hostname rac2
  Rac2
  You should establish the equivalence before user...
  exec/usr/bin/ssh-agent $SHELL
  / usr/bin/SSH-Add

  If you do not configure ssh for the equivalence of the user
  http://www.Oracle.com/technology/pub/articles/smiley_rac10g_install.html
  Or
  read the SSH user equivalence is not defined on the remote nodes

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Pavilion p6330f PC: SMART Test: SMART short Self Test FAILED

  I had so many problems with this computer. Whenever I have turn it off then go turn back will go to Recovery Manager. I did run the computer health check and did the basic test and Test drive both hard say Test INTELLIGENT: SMART short Self Test FAILED. What does that mean?!

  Hello

  It simply means: the HARD drive is about to die. Please save all your data if you could and be prepared to replace the HARD drive. Is your machine still under warranty? If so, please contact HP for replacement

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Kind regards.

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K