My HP 3 year all-in-one C4280 shows USB not connected and "device not detected.

Similar Questions

• my all in one 2610 printer is not compatible with the imac using Yosemite

  my HP all in one printer 2610 does not seem to be recognized by my new imac and I kept problems so uninstalled. Now, I want to try and reinstall it, it says that yosemtie does not support PC applications. Is there a way around this or do I have to buy a new printer? If I can anyone recommend a good that is compatible with my iMac?

  We invite you with pleasure!

  Scanner failure indicate a hardware failure of the bulb scanner, such a harware failure is likely to prevent other features like the all-in-one device is based on one of its components and the device is ' t ready to process a print job.

  Follow these steps to disturb such a, if the question is I'm afraid, maybe it's time for a new printer:

  http://support.HP.com/us-en/product/HP-Photosmart-2600-all-in-one-printer-series/391114/model/391116/document/c00587971/

  Kind regards

  Shlomi

• 3056 A what all-in One - fine work, then not?

  I got the All in One printer it even not a month ago, and it worked very well for about a week. Now, all of a sudden, this isn't paper. It seems that the rubber rollers not grasp the paper and the bar to hold the rollers is very loose. On the rare occasions that the printer pulls a piece of paper through it tries to turn on your side and ends up increased inside the printer and do not get out of the other side. I tried all the troubleshooting and nothing works. I do not have the receipt (was a gift), and threw the box after I knew it did not work properly. Any suggestions?

  I'd take a glance at this document.  If you have performed the steps in the document then I would contact Hp support for assistance. It is not necessary to have the front desk if you are still in warranty HP could replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  Let me know how it goes.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• my hp Pavilion all in one 23-g218 can be connected to a TV

  my hp Pavilion all in one 23-g218 can be connected to a TV

  Not with the hardware you have but you do not have 2 x usb 3.0 ports and there is such a thing as a usb 3.0 HDMI adapter:

  http://www.Amazon.com/Ideashop%C2%AE-quality-adapter-converter-laptop/DP/B010S09TPI/ref=sr_1_3?ie=UTF8 & qid = 1448745297 & SR = 8-3 & Keywords = USB + 3 + to + HDMI

  It will not sound, but you can connect an audio cable, too. Also don't forget something like a Chromecast that will take what's on the computer screen to the TV via a wireless connection with any kind of video card. I think Amazon is something similar.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 1315 all in one printer: my 1315 all in one printer shows "paper jam".

  My 1315 all in one printer shows "paper jam" even if I can copy directly, and it has good connection with the computer, there is no jam. I also changed the ink cartridges to see if that helps - it is not.

  Thank you for your help. I tried everything, but it didn't work. In the end I tried to change the port to USB port on the computer and we are back in business. The printer was the problem, it is the port. I hope this helps someone.

• Before left SS USB not detected & gt; Model: 20-a220l & gt; Series of PC all-in-one HP Pavillion 20

  Dear concerned

  My PC: Model: 20-a220l > HP Pavillion all-in - one PC series 20,.

  Operating system: WIndows 7

  AV - SS USB not detected by any modem or USB key left right back side - USB 2.0 work.

  Rgds/Khalili

  Hello:

  You can have a TI USB controller.  See if this driver USB3 works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104401-1&cc=us&DLC=en&LC=en&OS=4063&product=5192630&sw_lang=

  If this driver does not work either, please complete the following steps so I can know what model USB3 controller motherboard in your PC is using.

  Go to Device Manager, find the other devices category, then click on the USB controller needing drivers.

  Then click on the Details tab in the upper part of the window USB controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

• HP Photosmart C5280 All in One printer works is not after the installation of updates

  OP: Problems with my HP Pavilion connect with my HP Photosmart C5280 All in one. Allows to work properly and after running the update something happened.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello iwasbetterbutgotoverit,

  1. do you have an update of the hardware installed on your computer?

  2. what exactly happens when you try to print from the printer?

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This automatically diagnose and fix printing problems, installation of a printer, connecting to a network printer and other related errors:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  As it was working fine before installing the update, I suggest that you do a system restore on your computer.
  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can visit the link to the KB Article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  You can use the System Restore tool to undo the system restore if it does not help.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 4500 all-in - One Printer - G510g will not print * sends an e-mail to yahoo my Yahoo or att.

  Win 7. HP Officejet 4500 all-in-One Printer - G510g does not print e-mails generated by yahoo my Yahoo or att.

  * prints the header only. OK, Juno & Hotmail prints. Have tried to reinstall the software to print, etc..

  Thank you

  Com63

  I'm sorry you have a problem with the printing of Yahoo.

  See if you can print from another program, such as, (firefox, Safari, etc.).

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• C4280 printer all-in-one: C4280 does not print

  Hi all

  I got this C4280 at a yard sale.  They said it worked, but he has not been connected over the years.  Without installing it, I tried to copy and it goes through the motions, sounds good, but nothing appears on the page.  I tried wiping and cook with the vapor cartridges.  It feels like the black, it is empty but there is no ink to color one.  Some came out when I steamed it.

  I installed the software and tried to clean without success.  I actually had a very light something out of the black cartridge but nothing about the color of one at all.  Ink levels show black as '? (probably empty) and color as most half full.  I would like to get something at least, no color?

  I have a few cartridges no HP on order, appear in the coming days. Can someone suggest that I try to copy, or give me some indication that this might actually work when installing the cartridges?

  Thank you!

  Hi @26kick.

  Welcome to the Forums of HP's Support. I understand that you have a problem getting to your printer. I would like to help.

  Lack of use could have damaged printheads. This could be the cause of the problem. Fortunately, the print head is integrated in the ink cartridges. Replacement of ink should solve the problem.

  You can also try to go through this document. Series of HP Photosmart C4200 all-in-one - output printed lines or scratches

  I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• HP Photosmart all-in-one C309a: need help Urgent! -HP Photosmart all-in-one problem C309a Incompatible cartridge - 564 and 862

  Hello everyone.

  I am a happy user of HP Photosmart all-in-one printer and for many years never had a problem.  I always bought new 862 cartridges and it worked fine.  Recently, a friend brought me to Singapore two new series of cartridges, but the owner of the store said this is the new higher capacity cartridges.  I said why not?  Even better, in fact since the printer is a guzzler of ink!

  This is, because I tried to install these new cartridges, I always get the message "Incompatible cartridge" after what, I can't not access the printer.

  Can someone help me solve this problem?  The cartridges are exactly the same, so I suspect its something to do with the chip?  I tried all possible methods such as the re-installation of the cartridges, remove the carriage and re-setup, cleaning the cartridge chip, etc.

  Since I'm brought this printer back from China to Europe, I really need to solve this problem otherwise I'm stuck without a printer.  These cartridges are not available locally.

  I would be grateful any advice!  Thank you.

  Your printer can use cartridges of 864. Unless you call HP and have them reset the printer to your new country, you live. Only then these cartridges can be used if you can find them on the spot. Call HP.

• Photosmart5520-all-in-one: printer displays is not on the computer - cannot print

  I desperately need help... I have a photosmart 5520 printer all in one for more than a year, it is set up wireless with my laptop HP and up to today, it worked perfectly. I changed the ink cartridges yesterday and did a print and everything was fine. Today, I can't see the printer on my laptop... it has simply disappeared. I tried to open printing HP & doctor scan on my desk, but it does not, is not the printer shortcut icon.

  I tried to download the driver of printer again 123.hp.com, and although he has downloaded and saved in my downloads, when I try to run it, I get then them 'extracting files' the 'permission' box, but then nothing!

  What the hell happens and what can I do to fix it?

  I have very limited knowledge of computers, then all statements must be explained in a VERY simple!

  Thanks for the tips. It wasn't the printer, it was a problem with my HP laptop. ..... Idid a system restore last week and hey presto, it's all good now. I took note of your instructions anyway, just in case I have to do a restart in the future. I really enjoy taking the time to respond to my problem. Once again, thanks a lot. Jan x

• HP PSC 1410 all in one printer scanner does not work

  My printer, HP PSC 1410 all-in-one works fine as a printer, a scanner and a copier until I had a virus and had to reformat.  I have the original HP for the printer drive, downloaded the software undated and have loaded, deleted and reloaded the software 20 times.  The printer and copier works well.  Microsoft appears saying that scanner drivers are not certified, etc. and I can't scan to work.  I had put in hundreds of hours trying to get this to work.  I am 71 years old and I already have the computer work for my company 18 years ago.  My inability to solve this problem that bothers me more than anything else.  I need some young soul to help me that whip.  I don't buy a new computer or upgrade to Windows 7 until I fix this.  It has become a challenge, but I need help.  Kenny:

  Hi KennethPlaisance,
   
  Method 1: HP has created an update to update the driver to scan and fix the problem. Check if it helps you to fix the problem.
  For more information, see:
  The digitized files disappear after scanning with HP Solution Center
   
  Method 2: Use the diagnostic utility scan to fix the problem automatically.
  Visit this link to download the utility:
  "Scanning device could not be initialized" and related scanning errors display in Windows XP, Windows Vista and Mac OS X

• my hp all in one printer/scanner is not list scanner

  I had this hpdeskjet f2480 all-in-one for a couple of years ago, this afternoon, I decided to clean my desktop computer.  I unplug my all-in-one, he moved 2 feet, cleaned my office, plugged my all-in-one, and now, it's only to show that it is a PRINTER!  I printed something earlier in the day, but I've never known this kind of thing when I dissconnect for cleaning, Help!  I know that I can't find the cd that accompanies all of this into one, so reinstall?  How would I do that?  I scan a lot of things and I need my all-in-one to an all in one!

  Hello @unicorn1 , welcome in the back

  I hope to help you with my suggestions for the problem you are having with the scanning function with your Deskjet F2480. I really don't know what could happen with what you have explained, perhaps the software has been modified in some way.

  Nevertheless, try to run the installation again to ensure that the full feature is installed, which includes the scanning software.

  Click on this link, to choose what operating system you have, click drivers and download the software. When it is finished, start the installation and follow the on screen instructions ended and the printer is installed completely.

  HP Deskjet F2480 all-in-One Printer Drivers

  Let me know the results. Good luck!

  Happy Tuesday