My hp C309g printer range fails to align. just changed the ink cartridges. Works on Windows 7.

Similar Questions

• printer-i just change the ink cartridge, but the light is always hide

  I just changed the ink in my printer cartridge, the light which shows needs to be changed is still. Can someone help me, please?

  Contact the manufacturer of your printer.  It is a hardware problem that neither Microsoft nor Windows caused or can solve.

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• How can I change the ink cartridges in a printer f380 all in one?

  I bought this printer with a computer years.  Given that I had a printer I liked, I never hung until recently.  I have no idea what I did with the booklet that comes with it, and now I need to change the ink cartridges.  I don't know how to change them.

  Any help would be greatly appreciated!

  For more information on the change of the cartridges, see the document here .

• Printhead 7510 gliding is more to the center when I open the printer to change the ink cartridges.

  I have an all-in-one Photosmart 7510. My slides print head is no longer the center when I open the printer to change the ink cartridges. It remains in place on the right side. I can't access the cartridges. Otherwise, the printer can print pages without problem - it is not blocked when printing. I have had this printer for during 9 months - it is a new problem.

  Thanks, but I returned the printer for a replacement - it was still under warranty.

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.

• Printer HP Officejet 6100; Win 7; Access the ink cartridges

  Printer HP Officejet 6100; Win 7;  If the ink cartridge access door is opened with the printer, the cartridge printheads do not change access.  No error reported.

  Well, couple of questions:

  First, they move with the door closed while printing, I want to say it actually prints, which would indicate that the transport is not stuck on the side? If it does not move, it may be blocked behind the paper or something inside the printer. It is not recommended to reach into the printer.

  Second, is there an indication (light/message) which shows the door is actually open? Otherwise, there is a tab inside the right side of the door near the label to ink cartridge number? It is located on the edge of the door, and goes into the printer indicating open or closed to the printer.

  If all this seems correct, try a hard reset on the printer. Powered on, unplug the power cord of the printer, wait at least 30 seconds, then plug the power supply cord. Turn on the printer and see if it will allow access to the cartridges.

• Maxify MB2320 will not print after changing the ink cartridge

  I just changed my black ink cartridge last night and now it won't print. B504 code keeps coming up and I followed these instructions to restart the printer. Whenever I turn on the printer, it spits out 2 pieces of paper, so the paper is not jammed.

  Hi GinaC,

  To resolve the error B504, contact technical support directly. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays).

• printer all-in-one PSC 1315: check the ink cartridge light flashes

  the last time I printed the page came out very laboriously and slowly. The next time I turned on the print cartridge check printer is flashing. My specific request is the medium that contains the cartridges is a little loose (up and down) approximately 1/16 "or more. Is this normal? Thanks in advance for any advice...

  It is normal that there is to play in the transport. Slow printing is caused by the failure of one of your cartridges.  The document here may help address the error lights.

• I can't go to my printer. It will not recognize the ink cartridges are full!

  My epson 7400 has not been used for 6 months. I cleaned and aligned the nozzles and it used 2 full cartridges. I installed new ink cartridges, and he says they are empty. Now none of the buttons work, it does not seem to recognize all commands. What should I do?

  Hello

  Turn the printer off

  Unplug the printer from the computer and the wall outlet

  Reinstall the cartridges

  Support all the ink cartridges until they snap into place to make sure that they are well housed

  Close the cartridge cover and push it down until it snaps

  Close the scanner

  Press on the Stop button to start loading of ink. It takes about 2 minutes.

  When the the light stops flashing and remains on, the ink load is complete

  	Caution:
  Never turn off the Epson Stylus CX while ink is in charge or you'll be wasting ink. If the ink light flashes, press on the Stop button and lower all the cartridges safely Manually clean the print heads Plug the printer into the wall outlet and the computer.  Turn it on and try printing again. Updates

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• The documents don't print well after replacing the ink cartridge

  Original title: HP 6980 printer

  I just replaced the ink in my HP 6980 printer; now all my documents are dirty printing

  Hi, Annette.

  Manually clean the cartridges

  Scroll down to "remove the duplexer.  Clean the rollers alike.

  5 easy steps to clean inkjet printer

  Print quality problems

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• "You are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator.

  XP Pro, SP3. I downloaded the free Bullzip pdf printer. Somehow my old printer pdf in my printer disappeared list which I have used for years. I get this message when installing - "you are not allowed to change the settings for this printer. If you need to change the settings, contact your system administrator. I click ok and it ends, but it doesn't work. It does not appear in the printer control panel as a printer to change anything.

  I built this computer at home and I'm the only one using it. What is this function 'administrator '? I've never had to administrator on any program. Never. That is what it is?

  CNET is infamous for the grouping of things in its downloads as much a / v programs report as junk (I went through the same thing using eSet NOD32 has / v).  I seem to remember that if you ignore the warning and download the exe file and then use a tool like the free 7-zip to extract only the file necessary to run the program you want, you can work around the problem.

  For a pdf printer free which is not CNET - and works well - go here--> http://www.cutepdf.com/products/cutepdf/writer.asp

  EDIT TO ADD A LINK:

  See, for example, http://forums.cnet.com/7723-12543_102-582307/safe-downloads-cnet-com-sorry-but-not-anymore/

• Photosmart 6520 print not in black after I installed the new cartridge.

  I just replaced the black cartridge in a Photosmart 6520, and it will not print in black. Color cartridges print very well.

  Appreciate any help.

  Thank you

  Summer2

  Thanks to YouTube, I have set the printer. The screen under the black cartridge has been blocked. He just needs cleaning.