My HP dv4-1145go is dead - no lights, no video, nothing.

Similar Questions

• The motherboard number dv4-1145go (p/n FR920UA #ABA)

  My laptop dv4-1145go has a mother totally dead - no lights, no fans, dead. I need the number of the motherboard reference, hopefully without disassembly.

  Is there a site I can access this information?

  Ah, Ha Ha... Mr. Martin... You make me sound really old. You can call me Jeff...

  Even if you had the equipment to shoot poorly the real problem with a Board, 99% of the time it is not worth fixing, it's always cheaper just to replace it with a used or a new.

  I just wasn't a bad stick of RAM, sometimes a machine will appear dead when RAM is bad.

  Good luck with this Bill!

  Keep me and the posted forum.

• NSLU2 Dead - no lights, power seems to be OK.

  Hi all

  My long in the tooth nslu2 (2006?) has abandoned - he was out of the network this morning and won't start at all.

  No light, no sound - nothing.

  Food seems to be dishing out about 5.3V - so I don't think that.

  What are my options?

  Thank you

  Tony Jewell

  Has taken apart - if two jumps of the electrolytic capacitors. All is well again.

  I hope that this is not part of electrolytic defective batch - if our slugs could be reached end of life.

  Before:

  After:

  

• My Sony Vaio model PCG - 61611L Green LED lights up but nothing happens

  When I turn on my Sony Vaio model PCG - 61611L, the Green led lights up, but nothing goes well. The laptop is 2010 and is never abused, so I don't know what happened. It just started this making times and now I can't turn it on at all. Any suggestions?

  shoemanfl,

  It seems that you have no POST issue.  Is it the caplock/numlock light up when you press it?  Did you try to connect to an external monitor to see if it's a matter of display dim?  If this is no a POSITION, try reinstalling the ram or using one at a time... you can also remove the optical drive and hard drive to see if you can start any found nail system.  If you can not always unity would require service...

• Satellite A300 is completely dead, no lights, no power at all

  I checked th AC and power cable adapter, but the unit does not power upward. There is no sign of it being connected to a power source.

  No light. The plug of the power cord plugs into is wiggle a little put the PIN is stable.
  Any suggestions?

  > Any suggestions?
  There must be a serious problem with electronic power (motherboard) so I guess there is nothing you can do about it. Bring it to the Toshiba service and ask for help.
  In such cases mainboard needs to be replaced, so it can be very expensive for you.

  Maybe it's time for the new laptop computer.

• WRE54G dead - no lights on

  I have a WRE54G and yesterday I noticed that my connection was very poor, so I checked the Extender and the two blue lights was on but I decided to hit the button Configure and see if this helped (have done it before).  When I did the two blue lights exploded, I tried pushing the reset button but it did nothing.  I have a second extension, so I plugged it in and it worked fine all day and night but this morning I had a blue light and a red.  Yet once I pushed the button set up and all the lights went dark, ideas, that can bring this back to life?

  Try this-

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your Expander, wait 30 seconds and reconnect the power cable...

  1 connect your Expander to a computer, click the Start button > settings > Control Panel > network connections - right click on the Local area connection icon and go to properties - in the "Général" tab select "TCP/IP Internet Protocol" and click on the button properties-select "Use the following IP address" - IP address: 192.168.1.5, subnet mask - 255.255.255.0... Click on the Ok button to save and click 'Close' in the main window of properties - provide...

  2. now, open a page of wired Internet Explorer browser on your computer (desktop). In the address bar type - 192.168.1.240.
  Let the empty user name & password use admin lowercase... It should open your Expander installation...

  3. Once you get to the configuration page, you can follow this link to change the settings of Expander...

  NOTE: The link also says to check the settings of your router wireless...

  4. While changing the Expander settings, please make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on the two devices (router and Expander)... Also be sure to change the default IP of the Expander to match your network and gateway address must be your router address... e.g. Expander IP address: 192.168.1.240(assuming adresse IP par défaut de votre routeur est 192.168.1.1) subnet mask: 255.255.255.0 default gateway: 192.168.1.1...

  5. After configuring the Extender, you must disconnect from the computer and go to the Local network connection TCP/IP properties and set it back to get automatically the IP addresses... Disconnect the Extender from the computer and the two devices (Expander and router) power cycle... Your extension must be configured...

  In case if you do not get the Expander set up just to leave connected to your computer and reset it for 30 seconds and follow step 2, step 3, step 4 and step 5...

  I hope this helps.

• dv4-1365dx caps and scroll lights Flash 4 times.

  When I turn on my computer, the hard drive starts but stops. The lights on the bar (next to the power button) turns on, but the screen does not work. Then, the caps lock and scroll Flash 4 times in sequence. My warranty expired last year, what should I do to fix my problem?

  Thank you for your help, you two. I had already tried a hard reset, without success. On the advice of another forum, I have remove and reinsert the memory sticks in the back of the computer. I think they must detach when it filed on an accident. In doing so, I restarted the laptop and now it works fine.

• Pavilion dv4-1145go: software for the "other devices" in the Device Manager in a new installation

  After having rebuilt the laptop above with the new motherboard and the hard disk, I loaded a new copy of Vista using an ISO Setup disk and my COST. Everything seems perfectly.

  But I can't connect to my router, LAN or wireless. Realtek RTL 8101 E NIC driver appears to be installed correctly, but the network controller and several "other devices", for example: device Base system, SM Bus controller, etc need drivers.

  My dilemma is that I don't know what (s) to search for.

  In addition, while searc hing of HP Web sites, I was not able to locate the drivers available for this model of Pavilion. Just Web sites ask me enter the model number, then display the image of this model and ask again the model number. Pilots locations have changed on the HP Web site?

  Any help I can get will be greatly appreciated.

  At any time.

  Glad to be of assistance.

  Try the driver wifi directly from Intel.  You want the driver of first or second in service if you're running Vista 32 or 64 bit. Then download and install the first driver on a Web page.  You don't need the software if you let Windows manage wireless connections.

  14.3.0	09/03/2012	Windows Vista 32-bit	Download
  14.3.0	09/03/2012	Windows Vista 64-bit	Download

  ACPI\HPQ0004:

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3688870 & swItemId = ob_81492_2 & swEnvOid = 2096

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-61697-2 & CC = US & DLC = in & LC = on & os = 2093 & productOid = 3795304 & sw_lang =

  Semper Paratus!

• MAC mini (late 2012) OS 10.11.6 intermittently has no video. CK of hardware is ok. Computer chimes and the light, no video. Close and wait a while for the most part solves the problem. Monitor is ok.

  Mac mini (late 2012) OS 10.11.6 intermittent video on turn on. Only when you quickly turn off. Lights, chime occurs, but the video remains black. Monitor is ok. Usually can recover if it is closed for a while, then restarted. Verification of the material is good. (extended) First aid disk shows no problem.

  Any ideas?

  Have you tried another cable?

  Another monitor?

• Re: Satellite P100-188 shows no display, lights flash, but nothing

  When I start the laptop, flashing the light turns on but the screen remains blank.
  I see a cursor flashes at the top left of the screen for 2 seconds but then nothing. No logo, no MESSAGE, nothing at all.

  External monitor is the same as the simple fact that while the cursor blinks on the screen of the laptop, it only flashes on the external monitor.

  I tried to put in the next fresh RAM modules, tried, unplug and take the WiFi card and then put in a new RAM but nothing changes the situation.

  It is known problems with some laptops with nVidia in them chips. One of these problems is exactly what I am experiencing, however, to the best of my knowledge, this model is not a nVidia GPU in it.

  Any ideas or thoughts would be very appreciated.

  > I see a cursor flashes at the top left of the screen for 2 seconds but then nothing. No logo, no MESSAGE, nothing at all.
  Sounds bad!
  It looks like a hardware problem, a part of the motherboard.
  In the worst case it could be the motherboard itself I thought it might be a RAM problem, but it seems that you must check this already...

  I think that the motherboard must be verified
  I doubt that you have a few tools that are needed to check the motherboard, so I recommend a professional who could the fact for you

• Light Room video - .mov and .mp4 - saying video not supported in developing

  Hello

  I have a movie of drone that I'd love to put in ambient light. I have the .mov file, and I converted it to encode in .mp4 media. LR is saying: "Unsupported Video in develop."

  Can someone tell me why a simple video cannot be imported? in .mov or .mp4 format?

  Thank you!

  Hello

  Just to clarify: your video has been imported in effect. This is different to being supported in the develop module. Lightroom does not allow you to use the module development with any video; It is not a video editor.

  However, there are workarounds where you can apply the development parameters to videos. See this link, for example:

  http://LightroomKillerTips.com/another-way-edit-video-clip-Lightroom/

  If you need more than that, you should consider using a tool like first or Premiere Elements video editing.

  Mike

• Dell Dimension 4700 solid Amber Light but now nothing

  A few months ago my Dell Dimension 4700 does not, he just had a solid clear amber.  So I read on the forum and I replaced the memory and the computer booted.  It lasted for about 6 weeks, and then I got the amber light again.  So I moved the memory and used an eraser to remove static.  Still had a yellow light.  Then a few days ago I had no amber lights - nothing.  So I bought a pwer supply and installed today and it still does not work!  Any suggestions?

  Thanks a lot for your helo!  I bought a power supply, but was still the question, so I bought a motherboard and my computer is a race!   Thanks again!

• Portable light for video editing?

  Hello

  I'm going on a long trip to Asia where I'll do a video on the go a lot. I'm open to Mac or PC, with a preference for PC. Can anyone advise me on the best weight for the compromise of performance?

  I thought I'd go for a Dell XPS 13 with this configuration:

  • 3rd generation Intel® Core™ i7-3537U processor (4 M Cache, up to 3.1 GHz)
  • Windows 8, 64-bit, English
  • 13.3 "FHD 1080 p
  • 8GB¹ DDR3 Memory SDRAM at 1600 MHz
  • 256GB Solid State Drive
  • Intel HD 4000
  • 2.99 lbs

  I'm a bit wary of the Intel HD 4000. The rest looks pretty good to me, what do you think?

  I don't need first-class performance, but I don't want to fall asleep on my Pad Thai in waiting for the rendering of base effects.

  Thank you very much

  1. A laptop is always a compromise and can not outstanding performance.
  2. Only 8 GB of memory is a serious drawback, 16 GB would be much better.
  3. Only a single SSD is not enough. You need at least one other 7200 RPM (e) SATA disk or drive USB3 for media.
  4. You need a power outlet to power the additional disk and one for the laptop, because the battery is not the last long enough under the heavy.
  5. The Intel HD 4000 card STINKS for video editing, especially compared to 1 + GB VRAM and nVidia with CUDA.
  6. The i7-3537u is only a dual core 2.0 GHz.

  The best you can expect is a system that is part of the bottom 5%, at least 30-50 x slower than a fast system. Be aware that when a fast system needs an hour to export a timeline, this laptop will need three or four days for the same work. Another reason, that you need from this socket. See reference PPBM5

• firmware for the iPhone bluetooth headset original work with the 5s iPhone

  Hello to our community,

  I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221

  This helmet does not work correctly.

  When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.

  When I disconnect the headset no lights are bright and the headphones does not work.

  After charging more then 1 hour the same answer.

  When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.

  When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.

  Is there a possibility to reset? A new firmware? An Exchange program? Any help?

  Max

  The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.

• Satellite A210-12U - no lights come on or anything like that

  I have a Satellite A210-12U who died on me. I wasn't doing anything special, just posting on a bulletin board, one just like this and the power died, almost as a power cut, without warning. It was plugged in at the time. And now it is completely dead, no light doesn't come on or anything like that. Power cord is fine, just like the battery because the two work very well on my L500-11N. I tried out the battery and the power cord, hold the power button for more than 30 seconds and the replacement, but he's still dead. Is there some sort of internal fuse?

  I thought it might be some sort of internal fuse, but have no idea if she has one, it is unlikely, if yes, can I change myself, and where can I find?

  Thanks in advance.

  Hey Buddy,

  I had a similar problem last year and I did the following steps:

  -Disconnect the battery and the AC adapter
  -Wait at least an hour or over night for example
  -Reconnect the two (battery and AC/DC adapter)
  -Try to start the laptop

  If that doesn t work, this seems to be a malfunction of the equipment. Maybe the card mother, AC/DC adapter or something else
  You should ask your local ASP help ;)