My HP envy rattling m6 fan

HI, I had my HP envy m6 since may, and yesterday, I noticed that instead of the fan being quiet and pleasant as ot usually was vibrations. So I was sondering if he just needs to be cleaned or if it needs repair.

Take an air cartridge and blow out all the dust bunnies and see if make a difference. If not then you can try to clean it up, but if you're going to disassemble your strengths so replace it so that they are usually not very expensive.

___________________________________________
* Click on the star of CONGRATULATIONS on the left say "thank you."
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

Tags: Notebooks

Similar Questions

  • Fan of Sleekbook 4 HP ENVY rattling noise

    Product name: HP ENVY Sleekbook 4 PC
    Product number: C2K72UA #ABA
    64-bit Windows 8

    So I've had this laptop since November and it was fine, until a few months ago, when he started to make this fort of the sound vibrations in the upper right. Sometimes he'd stop, then rattle noise would come back in a few seconds.

    What should I do?
    [I don't have a warranty on this laptop]

    Hey jennyydang,

    I'm sorry that you run into a problem with the fan. You may already be aware of this but the laptop comes with a standard 1 year warranty (free repairs for non-customer - damage caused by). Which is included in the price of the laptop if you bought new or is less than a year (even if it was, say, given to you... If it is less than a year, he got a guarantee). If it's less than a year, I suggest strongly sent the repair. The fan noise of rattling is normally fixed by simply replacing the fan.

    If the laptop is more than a year, you could bring to a repairman or replace the fan on your own. (It's a very tedious job, and at least that a repair like this is a hobby for you, it's worth the price you pay someone to fix it)

    Envy 4 Service and maintenance Guide - Fan of the manufacturer 691641-001 page 55.

    HP parts store - 800-227-8164

    I hope this helps! Please let me know if you have any questions on anything

  • HP Envy: Updated, now Fan always on top

    It used to be that if the fan was running upstairs, I closed just a few apps and it would immediately slow down and be almost inaudible.

    Now the fan is always on (and the air coming out is hot enough) even when no apps are open, and the room is 62 degrees.

    I did all the standard things:

    • Updated the BIOS
    • Cleaned all vents
    • Disabled indexing
    • Off many other features
    • Turned Coolsense works

    I have to just live with the extra noise?

    Al

    TouchSmart HP Envy 17
    Windows 10 worm 1607

    I went to this page:

    https://www.wintips.org/how-to-fix-Svchost-exe-netsvcs-memory-leak-or-high-CPU-usage-problems

    Finished and disabled the windows update and a few other things, and now the CPU usage dropped by 20 percent to about 2 percent.

    I don't know exactly which thing solved, but now the fan is nice and quiet.

  • Envy 17 3D: fan runs constantly and slows down the system

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Kelvin1 wrote:

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Means that your mouths and radiator has more than dust on them and the fan does not work correctly. You have to disassemble and clean the fan and vents to let him work again properly.

  • ENVY 17-K112NL: fan stil running and power led is on after stopping down

    Hello.

    After that windows 10 updated my laptop was not completely down.

    The screen goes black but the fan still works and supply line is turned on. To turn off, I press the power button for 5 sec.

    I tried to update the BIOS to change the BOOT order - doasn can't work.

    Can you halp me?

    Problem solved. Solution found here

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-10-laptop-won-t-go-into-sleep-mode/TD-p/5171069/page/116

  • HP Envy H8-1534: fan motor turns

    Is noticing in the last 14 days of the fan motor works sometimes continuous, this engine indication starts to have some problems/replace, concerned can cause problems with the system?

    I am surprised at Best Buy - Squad Geeks do not have one, but they are easy to find.  IE: AMAZON or the FRYwould be able to match it.

  • HP Envy 15-q667nr: Fan of replacement/upgrade for HP Envy

    Hey, my laptop recently had a 90 b error and stopped working. We tried everything on the internet but nothing worked. So I decided to replace the fan. So what would a fan that fits in my PC. What updates you would recommend? Any good tutorials on how to do this?

    @Huffer

    He should be able to order the part through HP PartSurfer. I just checked and it's there. Use the 15-q667nr , then the specific product number, which is T0W20UA.

    http://PartSurfer.HP.com/

  • replace the fan on 20-b013w Pavilion

    I have went through all the suggestions to appease the fan, now I have to replace it. Anyone know

    to do this?

    You can delete your personal "stuff", re - install the operating system and send it back.  OR

    You can try to do. What I'm saying now you is not political, and I do not suggest.

    How to get into the case and search for fan http://h10032.www1.hp.com/ctg/Manual/c03598525.pdf bindings

    The only reference is a http://partsurfer.hp.com/Search.aspx?SearchText=H3Z14AA CPU fan

    # 691593 001, as seen here, the fan is for your Visual recognition only. Please rate it. http://www.eBay.com/ITM/HP-691593-001-genuine-envy-23-system-fan-genuine-system-fan-HP-envy-23-AI-/181127595129

  • CqQ56-115DX: cooling fan

    Obviously need a new fan as parts rattling inside fan error and get... How can I know if the fan is a 3 PIN or 4-pin without opening unit before ordering?

    Mary

    Data sheet: http://support.hp.com/us-en/document/c02542735

    It's your laptop repair, go through the page 18, 71: http://h10032.www1.hp.com/ctg/Manual/c02657369.pdf

    You need HP 630722-001 part number, comes as heat sink

    From what I could gather info on this part, I think the cooling fan is 3 PIN type.

    http://m.Newegg.com/product/index?ItemNumber=9SIA3DY1RR8485

    http://www.Amazon.co.UK/630722-001-606609-001-cooling-heatsink-CQ56-100/DP/B00H43L7RG

    http://m.eBay.com/ITM/original-new-HP-617024-001-630722-001-617029-001-CPU-cooling-fan-3-pins-/310775378145

    http://m.eBay.co.UK/ITM/original-new-HP-CPU-fan-compatible-with-630722-001-595832-001-606573-001-/161141503915

    http://www.Amazon.com/HP-630722-001-thermal-mod/DP/B008FQP5UG

    Concerning

    Visruth

  • Envy 14: HP Envy running very hot (slows down periodically during the video)

    Hello

    I would like to get information on how to properly clean my HP Envy 14 laptop fans, number of product B4B14UA #ABA. I tried to use boxes of air through the ventilation openings, but I'm able to accomplish turns too fast the fans. I'm unable to remove dust. It is a laptop I've owned for about 2 years.

    I suspect that the fans/vents are blocked because the winds blow warm air and the base of the laptop is almost too painful to sit on my legs. The upper part of the keyboard runs hot along the strip of aluminum above the function keys.

    Although the use of the battery for several hours, now it takes an hour, running minimum settings due to the heat. In addition, while playing video, the computer will freeze and cause the video to stutter occasionally. I tried a computer laptop cooling pad, but it doesn't seem to be the problem.

    So, in summary, I would like to know whether or not to clean my laptop fans would void its warranty (if it still exists) and whether or not fans of cleaning would be possible for a layman.

    Thank you for your time.

    @Penvy,

    Hello and thanks for posting on the HP support forums.  Here is the link to your manual of maintenance and Service.

    HP ENVY 14 Notebook PC Maintenance and Service Guide

    This will show you how to access your motherboard and so on so that you can clean your system.  If your system is under warranty, but I would contact HP support for service options.

    Please use this link to contact HP support.   www.HP.com/contacthp/

    Please let me know how things are going.  Thanks again for posting and have a great day.

  • omen of HP: rattling sound of the fan

    Hi all

    I bought my Hp Omen in December and were treated like gold since, but whenever my is is on a flat surface the infallibly good fan made a rattling noise that only becomes stronger when I have the game. I have updated the bios and try to keep my software constantly updated, and none of this has anything fixed.

    I havn't cleaned the fans, because I don't know how to on this laptop and two, because I don't think I'd need 5 months, but I'm not an expert and I'm wrong.

    It's really very annoying and I want to get this resolved as soon as possible. So if anyone has any advice, please let me know.

    Thanks for the help in advance!

    Cleaning is not necessary short time unless you use it in a sawmill. Unfortunately, a rattling fan needs to be replaced. The unit should still be under warranty, so I recommend you call HP service under warranty on it.

  • Fan of 7214nr HP DV6 Envy stop working!

    Hello

    I have a HP DV6 Envy 7214-nr. It is a nice laptop. recently the fan stop working. I mean his work at first boot and then its only funtion to speed very very slow and barly... .barly you can hear it working. not like some months ago.

    usually, I heard the noise of the fan when I play games and generally it works charger if I turn on HP CoolSense. Games become very slow after the first 4 minutes and I can't hear the fan working not at all, and I can't smell even fan works when put my hand near the vents. When I restart my laptop I got this error:

    Hi there @shadad,

    Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I looked into the issue that you mentioned in your post on the Forums of HP Support. I understand that your fan does not work on your HP dv6-7214nr Notebook PC ENVY , and you receive an error message at startup upward.

    Please take a look at this document, called System fan (90 b) error message at startup. You will find that the document said to try the following steps when you receive an error stating that "the system has detected that a cooling fan does not work correctly.

    To resolve this error, follow these steps:

  • HP Envy 23 all-in-one. : HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs.

    HP Envy 23 all in a single C030. Blank Screen, power light, the fan runs. After that I opened start legacy and power cord from my puss. Help me please.

    Hi there @ZiECloNE,

    Welcome to the Forums of HP Support!  I understand that you are no longer able to boot your computer after a "event for pets.  I'm happy to help you with this.

    Don't forget to check all of your connections, power cord, power adapter, and maybe try another outlet and a direct connection to wall.  If there is no change then the following test: desktop HP - computer starts not (Windows 10.8)

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • HP ENVY 750xt Office: Office PC fan upgrades?

    I have just recived a HP ENVY 750xt desktop PC is brand-new in the Friday mail!

    I wanted to upgrade the case fan and add a case of PCI Slot Fan!

    I can add a fan to the RAM & update the heatsink fan!

    All of you who have this model or a model close to him.  Can you tell me what type of fan upgrades you did, that you have used the model fans and how it worked for you, and where you have been!

    Also, feel free to tell me anything else about this upgrade did it worked for you, or did not work for you!

    Thank you

    This particular model is a slimline form factor, these units are limited in space.   If you want to cut back to allow a bigger case fan, add a slot fan and a larger radiator, go ahead.  If the real purpose was to add a graphics unspecified, you never mentioned.

    Good day!

  • HP envy 15-j140na: maintenance of fan for a hp envy 15

    Hello.

    I am the owner of a HP Envy 15-j140na and wonder about the maintenance of my computer, I had the laptop for over a year and the warrinty has expiered, unfortonatly is when defects and problems begin to occoure in my computer, like the fan. The first thing I would like to talk about is what to do if something is stuck in the box fan that I hear a ratteling in this area as well as the sound of a small object occasonal felt road by the fan. The second is the progressive of dust in the computer collection as it's notable vagually because of me constantly on the road with my laptop,

    Some advice for what would be good.

    Summary: to the fan in laptop, done occasonal noise, dust problems?

    Notes; object can be in the position where he is sucked to the fan only to be hit by far later.

    @Fellx

    Taking into account of the laptop is no longer under warranty - and that you are interested in taking on the task of opening the box - then you can take a look at the Guide of Serviceand then decide your best course of action.

    Section: Removal and replacement procedures preliminary requirements

    Chapter 4, Page 34

    Section: Removal and replacement procedures for parts of service provider approved > Fan

    Chapter 6, Page 62

    Fan of repairs and repairs of this type in general, are not generally prohibitive compared to some other things that can happen.  Repair times, assuming that nothing else is wrong, definitely not months.  I should wait a few days, if that, would be required to complete single fan related repairs.  Of course, if something is wrong, the cost and the time required to complete the repair could change.

    I do not recommend, or I say otherwise, that you should or should not try to fix it yourself.  It is entirely your decision based on your skill set, your level of interest in the task once and your determination to avoid that the work done by a reliable repair home.

    Avoid the sprays of chemicals - compressed air is not always just air.  Read the label before applying any substance to your computer.

    Good luck.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

Maybe you are looking for

  • Restore Time Machine wifi data in neutral

    Help! Today I return MacBook Air of my wife in an Apple Store. They fixed a software problem. Apple wiped the hard drive, but the Air has been saved our Time Machine network. Apple has installed the latest OS X, but not the data of my wife. This, I t

  • LabVIEW 2010 crash when calling user32.dll

    Interesting LabVIEW 2010 'characteristic', I discovered this morning. Attached are two identical screws, a registered in 2010 and a registered in 2009.  These screws have been written specifically to demonstrate the bug, I came across this afternoon.

  • Media Player 11 and Windows XP

    I downloaded a. MP4 video. How can I get into Media Player and run it?

  • D3drm.dll is not loaded, this program requires a component missing windows

    I'm trying to run a program of simulater of flight that I have used before and I get this message. If anyone can help me with this it would be greatly appreciated. I've looked everywhere but can't find. Thank you.

  • BlackBerry Smartphones from scratch?

    Hello. You seem a nice bunch and good mood! I would like your collective advice if you have a moment. I'm English, on Hill - 80 years old and I must have upset my granddaughter who presented me with his Blackberry 8820 scrapped. It's a great piece of