My HP ENVY Sleekbook CTO 6z-1100 does not recognize my bluetooth speakers

Similar Questions

• My bluetooth does not recognize my bluetooth phone?

  For some reason, my computer does not recognize my bluetooth phone. How can I fix this problem and how can I be sure that my bluetooth works on this computer?

  Everything and allllllll help appreciated...

  Rick

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  How to setup a Bluetooth connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

  Using authentication keys compatible Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  The problems with Bluetooth devices

  Read the above and, if necessary, contact the manufacturer of the phone.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite C660D-178 - Linux does not recognize the Bluetooth

  Hello!

  I just bought this laptop big. I do step by step installation of my linux machine :-).
  The wifi worked well, but the system does not see the bluetooth device.

  If I understand correctly, the bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  Help, please.
  Here is the output:

  # lspci
  00:00.0 Host bridge: Advanced Micro Devices [AMD] device 1510
  00:01.0 VGA compatible controller: ATI Technologies Inc device 9802
  00:05.0 PCI bridge: Advanced Micro Devices [AMD] device 1513
  00:06.0 PCI bridge: Advanced Micro Devices [AMD] device 1514
  SATA 00:11.0 controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40)
  00:12.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:12.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:13.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:13.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:14.0 SMBus: ATI Technologies Inc. SBx00 SMBus Controller (rev 42)
  Audio device 00:14.2: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
  00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host (rev 40) controller
  00:14.4 PCI bridge: ATI Technologies Inc. SBx00 PCI to PCI Bridge (rev 40)
  00:18.0 Host bridge: Advanced Micro Devices [AMD] device 1700 (rev 43)
  00:18.1 Host bridge: Advanced Micro Devices [AMD] device 1701
  00:18.2 Host bridge: Advanced Micro Devices [AMD] device 1702
  00:18.3 Host bridge: Advanced Micro Devices [AMD] device 1703
  00:18.4 Host bridge: Advanced Micro Devices [AMD] device 1704
  00:18.5 Host bridge: Advanced Micro Devices [AMD] device 1718
  00:18.6 Host bridge: Advanced Micro Devices [AMD] device 1716
  00:18.7 Host bridge: Advanced Micro Devices [AMD] device 1719
  01: 00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8102E/RTL8101E PCI Express Fast Ethernet controller (rev 05)
  02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 002 Device 002: ID 04f2:b1d6 Chicony Electronics Co., Ltd.
  Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.

  > If I understand correctly, the Bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  You are right, that the BT is integrated with the smart WiFi ATHEROS WB195-HMC
  I have not much experience of Linux but BT and WiFi must be activated by FN + F8 (using Windows)
  Eventually, you need to enable this as well on Linux

• iMac does not recognize the external speakers

  After working flawlessly for two years, my iMac (running Mavericks) now does not recognize my speakers B & W MM1.  I restarted my iMac, unplugged and reconnected my speakers as well from the electrical outlet and the USB connection, but nothing has worked so far.  All other connections are solid.  Any suggestions?  Thank you.

  Hmmm. These speakers are USB, so they should be relatively problem-free.

  Try to disconnect all your USB devices, restart, and then reconnect the USB devices again. It remaps the USB.

  In addition, make sure the configuration under the system preferences/Sound/output is correct.

• HP envy sleekbook 4-1115dx: Audio does not

  PC audio does not work after update to 8.1 windows.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp60001-60500/sp60188.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63640.exe

  Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight and then click the set as default (if the button is dimmed so it's set by default alreay) - check if you now audio.

  Kind regards

  DP - K

• IPad 2 bluetooth does not work with bluetooth speakers?

  iPad 2 bluetooth does not work with my bluetooth speaker? What should do?

  to connect a bluetooth headset or a speakerphone with a device, it has not been used with before the bluetooth headset/speaker should be placed in the pairing / discovery mode, how do we do everything therefore in the manual of the bluetooth headset / speaker

• Satellite A100-786: Win XP does not recognize the Bluetooth

  Hello

  When I had Windows Vista Home premium on my laptop, I used the bluetooth device normally.
  But I had to install Win XP and now he don't even know that I have a bluetooth device!

  Any help would be appreciated.

  Seems that you have not installed the driver of BT stack.
  This driver can be downloaded from the Toshiba page!

  You choose the Satellite A100 series form of the driver and download the BT software.
  Select it with FN + F8, and then follow the instructions on the screen.

• My PC does not recognize the Bluetooth headset (JBL Clip +)

  Hi all, I have a JBL CLIP + Microphone/Speaker Bluetooth, which works fine when connected to my smartphone.

  

  The problem is when I try to connect the Clip of JBL + to the PC, because, if on one side the Bluetooth connection let the device be installed and visible,

  

  on the other side, I can't select the device in order to to use with Skype, MS Lync or just as an external speaker for listening to music.

  It is not present in the list of audio devices. Only the internal speaker is available

  

  I have red on others encounter the same problem, but the solution will not work in my case.

  Someone know how to that the device Bluetooth JBL Clip + appear in the Audio device list?

  It should appear as a headset with speaker and a built-in microphone inside.

  My configuration is:

  Laptop HP ProBook 645 G2 (Broadcom Bluetooth V4.0)

  Windows 7 Enterprise SP1 - 64 bit

  JBL Clip + (Bluetooth version: 3.0;)  Support: A2DP AVRCP V1.4, V1.2, HSP, HFP V1.6 V1.2)

  Thanks in advance

  Enrico Dario

  Venezia

  Italy

  Hello

  It works if you use other applications apart from Skype or MS Lync?

  We suggest that you uninstall and reinstall the Bluetooth card drivers and see if the problem persists. To uninstall the device, follow these steps:

  1. press on the Windows key + R, type devmgmt.msc.
  2. develop pilot Bluetooth adapter, click on the drivers.
  3. click on Properties, click on Uninstall.
  4. click on OK.

  You can run the hardware and devices Troubleshooter by following the steps below:

  1. press Windows Key + R.
  2. tap Control Panel.
  2. next, type Troubleshooting in the search box and press ENTER.
  3. Select the material and audio in the utility window.
  4. Select hardware and devices.

  You can also consult this link for troubleshooting steps more on the way of difficulty Bluetooth connections and audio devices and wireless screens.

  Let us know how it goes.

  Kind regards.

• I just installed Windows 7 and it does not recognize my HP2009m monitor speakers.

  I just installed Windows 7 from Win XP on my desktop that is connected to a HP2009m monitor with internal speakers. Win7 does not recognize that the speakers are connected, so I have no sound. How can I get Win7 to recognize speakers monitors? I need drivers? I have download the drivers for the monitor get Win7 recognize correctly.

  Thank you - that was where my thinking was going as the solution too - an I updated the video drivers, the sound started working!

• My computer does not recognize my speakers...

  I have a desktop Pavilion with Windows 7.

  Several months ago, I bought a speakers 'Bose Companion 5' system, which is compatible with Windows 7. It worked beautifully until about four weeks when all of a sudden the computer decides that she does not recognize the Bose speakers. After trying several times to fix the problem, I just unplugged the speakers.

  Then, a few weeks ago, I took a chance and reconnect the computer and heckling speakers! It worked!

  Well, long story short, when I logged on to the computer at night last Windows made one of their 'critical updates'. After that my computer was freezing every few minutes and my new speakers Bose were not recognized by computer!

  I did a system restore, but I had to restore it to a date where the speakers weren't working. And of course, they are not recognized.

  It drives me crazy! There is absolutely no reason that my computer recognizes no not my speakers!

  I wonder if the problem is with the USB port and if it is, does that mean that the ports will all fail?

  Can someone help me here please? I am so tired of fighting with the computer!

  I'd appreciate any help I can get.

  Thank you for hearing me.

  Niam, welcome to the forum.

  I'm jealous of your speakers.  In my opinion, they are among the best.

  Have you tried plugged into every USB port on the computer?  Sometimes it will work and another will not.  Also, have you looked at the "Control Panel / Device Manager / Universal Bus USB controllers" to make sure that they are all recognized and there is no yellow exclamation through them?

  For future use, when the application for aid, you must always include the brand / model of the computer or the monitor. This information is necessary for us to review the specifications for them.

• ITunes does not recognize my device. I have windows 10 on a HP Envy.

  I recently bought a HP Envy and it came with the operating system Windows 10. Whenever I plug my phone the phone companion rises and ITunes does not recognize my device.

  All the patches?

  Install the latest version of iTunes on your computer.

• HP 5600 Envy: I had to get a new laptop - it has Windows 7 and does not recognize my HP Envy 5600. Help!

  I just use the indications given on the support forum.  Error message was: "Printer not installed."  Not much to do!  My old laptop fell and broke, I got another one with Windows 7 too.  But it does not recognize my HP Envy 5600.  I have a wireless connection and a WiFi network in my house.  1 thing: it installs it as a scanner, but not a printer.  Please help me - it ' for 3 weeks and I can not print!

  Thanks in advance to anyone who can help you with this!

  Thank you.  In fact, I did a download of the printer driver for the HP Envy 5660 and let him take his time.  It installed perfectly and now I am running, printing, scanning and copying everything on Pinterest to get my house and my world a more beautiful place!  Thank you very much for your help!

• ATI radeon x 1100 does not not in win7 (32 bit) HELP!

  Hi all, I have recently updated for Win 7 (HP) and it does not recognize my graphics card. Win7 detects a "standard vga adapter" and not the ATI Radeon Xpress 1100 which is actually there (and has worked with Vista). I tried to download and install the driver vista for it, but he won't do it for me. The stabdard VGA card is that it will detect.

  I have a little technical sense and can operate normally these things, but in this case I'm just going around in circles. I searched every forum out there, and although there seems to be some suggestions, I have not found a solution. Basically, I want just a step by step procedure to get my Radeon x 1100 work in Windows 7.

  Can anyone help?

  Thanks in advance,
  McB.

  p.s. Sorry - I have a laptop Asus X50RL, running Windows 7 32 bit.

  The Windows 7 solution involves Asus publishes a full range of Windows 7 drivers, which one would be for the video. Did you ask Asus if they're going to do this? What did say?

  The current solution to "the video to work as it should" leads back to the original operating system...   Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• HP Envy printer 5540: printer does not recognize paper 8.5 x 11

  I removed the paper 8.5 x 11 and printed several photos 5 x 7. I removed the paper photograph 5 x 7 and reinstalled paper 8.5 x 11 in the main tray. Printer will not recognize paper 8.5 x 11. I removed the paper and slid back the paper guides and reinstalled the paper. No change in the problem. When I select "Copy" on the screen of the printer and go to settings, it displays "tray and main paper tray: 5 x 7" if I try to print from the computer and select 8.5 x 11 paper, the printer does not recognize that size paper and continues to display paper 5 x 7.»

  Hello

  Open and close the paper tray, here, it will show on the screen of the size of the paper.

  Click on modify and change paper size we Leter and the type of paper, such as plain paper, then check all difference.

• 8.1 Windows does not recognize the Touchsmart

  8.1 Windows Pro does not recognize the Touchsmart. This work like a mouse when I click on the screen. In the properties of the system, said that will not have a pen and touch. Someone knows how to solve? Thank you.

  Edit:

  "HP ENVY 15t - j100 Quad Edition CTO Notebook PC (ENERGY STAR)
  Product number: F5G56AAR

  Hi, I am a new customer of HP products. I made a mistake, my Ultrabook is
  HP ENVY TouchSmart 15t - j100 Quad Edition CTO Notebook PC.

  My touchscreen stopped working, because I had updated the drivers using a 3nd software named 'Slim Drivers'.

  This program was updated to some instances of my integrated video (HD 4600) and that make unrecognizable touch screen and display the touchdo has not worked.

  I reinstall Windows 8.1 again and has been updated disks directly from the HP website and the problem was solved.