My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

Similar Questions

• MAC OS 10.4 and printer Office Jet 6700 Premium

  You had to buy a new printer, Office Jet 6700 Premium. Networking Wireless with Windows PC, but cannot install Intel Mac Mini Tiger 10.4.1 running pre. Printer drivers are under MAC OS 10.5 and higher. Is there a work around? I try the installation CD without crashing the computer?

  Hello

  The printer is supported by OS X 10.5 and above, as you can see by the specifications below:

  http://www.shopping.HP.com/shopping/PDF/cn583a.PDF

  Try to set another pilot to get printing features and get a limited feature scan using Webscan via your browser.

  You will not be able to get all the features as the installation will fail on OS X 10.4

  1. In the Application's folder, go to the utilities subfolder and open The printer setup utility.
  2. In the printer list that appears, click Add.
  3. In windows, from the menu above, select default browser.
  4. Highlight the printer 6700 and spend the menu popup using Print .
  5. Select HP in this menu and then locate the HP Deskjet 6500 must fit into the operating system.

  To scan, use the feature of Webscan.

  You will need enable the feature of Webscan first:

  1. From Safari, type the IP address of the printer to enter the Web integrated printer server page.
  2. Enter the settings tab.
  3. Under Security, enter the parameters of the administrator.
  4. Check the box next to Webscan and click apply

  Now, you will be able to scan by accessing the analysis of SAP tab.

  Kind regards

  Shlomi

• Office Jet 6700 Premium: unable to print from 6700 JO unless I wake up

  Hello

  The appellant here desperate because I cannot solve this ongoing problem.

  System set up:

  Office Office

  HP Office Jet 6700 premium

  Wire in a BT Home Hub

  Laptop HP EVO, running wireless

  Problem:

  I can no longer print the laptop wireless. I need to go to my office and print something. Then only the printer seems to be "awake", and then I can print from the laptop. As you can imagine this is not how it is supposed to be and this causes a lot of frustration.

  The printer is also set for a static IP address (it was to solve other printing problems ). I also checked the firmware, and it is up to date.

  Please tell us how to solve this problem.

  Thanking you in advance

  Wolfgang

  Hi @Klee66,

  Welcome to the Forums of HP Support!

  I understand that your HP Office Jet 6700 Premium do not wake up when you print on it, unless you wake up before hand. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  There could be many reasons why this is happening, so please bear with me.

  I see what your printer firmware is up to date, which is good.

  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please try Fix It tool of Microsofts, solve printer problems.

  You do not share the printer from the computer desktop you have in sharing files and printing? Otherwise, this could cause part of the problem.

  Do you turn the printer power on and off?

  I can't see what your printer is connected to the BT Hub with an ethernet cable.

  It is possible that the laptop is connected to the printer cannot communicate on the 5.0 GHz network. If they are of the same name that will be confusing.

  Have you tried to configure the wireless and no cable connection on the printer to see if it makes a difference?

  How old is the router, have you also checked to see if the router firmware is up-to-date?

  Is the router dual-band? Two networks are the same SSID for 2.4 GHz and 5.0 GHz? If so, change the SSID to 5.0 GHz to a different name and restart all devices.

  What router do you have to BT?

  I suggest you read this article by BT, I have problems of connection of 5 GHz and features dual band wireless BT Home Hub 4 or 5 Hub.

  I see that you have setup a static IP address. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  While in SAP, open the network tab, and then select IPv4.

  Set the manual DNS on the printer.

  • Set the primary DNS as 8.8.8.8
  • And the secondary DNS as 8.8.4.4

  I would like to try the steps in this guide, HP printers - printer (Windows 8) "offline" Status Message.

  If the problem persists, please see these links or contact BT

  BT.com BT Home Hub 5 Product Details - link

  http://BT.custhelp.com/app/answers/detail/A_ID/46549/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com link - saving on the BT Home Hub 4 and 5 of Hub

  http://BT.custhelp.com/app/answers/detail/A_ID/43669/c/346/session/L2F2LzEvdGltZS8xMzg2NzczMzgzL3NpZ...

  BT.com link - what is the function of Smart Wireless BT Home Hub 3 and Hub 4 Hub5?

  http://BT.custhelp.com/app/answers/detail/A_ID/32235/kW/how%20do%20i%20Change%20The%20Power%20save%2...

  BT.com - contact us

  https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjowfQ...

  I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Photosmart 5510e printer has suddenly stopped printing correctly

  Original title: fault printer

  Hello

  I have a HP Photosmart 5510e printer that has suddenly stopped printing correctly because the black ink is not getting through.  I did everything possible troubleshooting I can and replaced all the cartridges for new ones, but nothing helped.  When I did a report print quality he had no black ink on it at all. This leads me to think that there may be a blockage between the cartridge and print head. Any ideas?

  You might want to try this: failure of black ink Photosmart 5510 e-All in one series

  Using cartridges HP no also could cause this kind of problem.  Otherwise, it is usually a sign that the printhead is kaput, impossible to replace this printer print head if the printer is also kaput, on the garbage heap, it will!  That's how it is with printers, you can either pay in advance for a printer expensive hard and has lower cost of Ink/toner replacement or you can buy a cheap and pay through the nose for ink replacement and in a year or two to mix the printer all out with the trash.

  John

• My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time. I use a new Windows 7

  My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time.  I use a new Windows 7.  Any ideas?

  Thank you, schasof

  Hello

  Maybe you can use "System Restore":

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  and the date when to use your printer worked OK.

  LC

• answering machine software for HP office jet 6700 premium?

  Hi Windows 8.

  As the office jet 6700 is attached to the phone line is a software feature (or 3rd party software) which allows the PC to act as the answering machine?

  I know that in the old days of dial-up Modem software such has been ubiquitous.

  I just want to cut my old answering machine for the configuration of the installation if possible loop.

  Thanks for your suggestions.

  Rob.

  Sorry, there is no functionality of software to allow the Pc to act as the answering machine. The answering machine is connected to the printer because it detects the printer calls.

  When a call comes, the printer reacts and reads as follows the line of the signals. He sends the call to the correct line (fax, phone or answering machine). This is the reason why the answering machine is connected to the printer. The computer will not be able to accept or guided calls or pick them up. Thanks for asking though, maybe in the future.

• Photosmart 5510 has suddenly stopped printing black

  I have a Photosmart 5510 new, which was working fine, then suddenly stopped printing black.  Replace the cartridge and still nothing.  Prints fine colour, but not black.  No error message, just jumps print anything in black.  Excluded bone by the attempt at analysis and still nothing.

  Yay! I'm happy now. I did the thing to chat online with technical support and that's what I got: on the front screen of the printer, press the arrow to the right, and you should see an icon "Setup." Press on that. Then press tools, then scroll down to "Clean print head." Press the key. When it's done it spits out a test page and voila! It now prints. I hope that this works for some of you all!

• OfficeJet 6700 Premium Cup footnote when printing from the computer

  OfficeJet 6700 Premium all-in-one - H711n - when I print wireless from the desktop (HP), I get an extra space at the top of printed pages and the bottom is cut off.   It is a new problem.  Printer did not have this problem in the past.   Scan doctor says everything is ok.

  Hi @katy36 and welcome to the Forums of HP!

  I see you have output problems.  I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.

  Mac OS X: how to find which Mac OS X Version is on my computer?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Also, do you have questions by making a copy as opposed to an impression?

  Please let me know what you find. Thanks for posting on the HP Forums!

• 6500 has suddenly stopped printing black - half full cartridge - even with 2 computers

  HP Office Jet 6500An running under Apple's OSX was OK, the next day asked to print (black only) and print completely white sheet.  Ink cartridge shows more than half full and seems OK. prints other colors without problems.  Situation is the same when you use another computer OSX. Have removed and replaced the same cartridge and have disconnected and reconnected the power.  Out of warranty (I think) and not worth hassle of maintenance.   Ideas - or replace?

  I would like to look at this document here. It deals with bad print quality for your printer model and offers some troubleshooting steps you can take to correct the problem. It will perform various tasks and provide instructions step by step for all the actions that must be performed to try to correct this problem of printing output. I hope this helps.

• Office jet 6700 Premium: printer Extra - how can I get rid of him?

  When opening HP utility for the HP OfficeJet 6700 I have two different printers.  It seems easy to remove one of them, but the Uninstall button (the sign less down the list of devices) is grey.  Does anyone know a way to undim on the button uninstall so that I can remove the printer 'extra '?

  

  Hello

  No, please keep the extra. Now you have two logical printers for the same physical printer direct printing support and the second using your wifi network. You can use both.

  Kind regards.

• Office jet 6700 Premium: Officejet 6700 on El Capitan installation generates error message

  My Officejet 6700 would print but it would print in grayscale color). I downloaded the HP - inkjet ink-SW-OSX - Mavericks_v12.34.51 (I note was released in October 2015, but also notes that the Mavericks is two itterations - old Yosemite was the next and now its El Capitan). I deleted my old HP 6700 driver and tried to install the new driver. But I get an error. I was going to attach screenshots of the error msg but do not see this option. I tried several times with the same result. Even tried to download driver HP - inkjet ink-SW-OSX - Mavericks_v12.34.51 a 2nd time.

  The driver should not be accurate for El Capitan instead of Mavericks, i.e. There are two OSs?

  I felt like I was in a 'catch 22' because I had deleted my old driver and now the new driver is not install and now I had no driver with which to print... so, I slept on it and went back just to try the 'install new printer' "printer & fax" introduced in system preferences. Here, I was introduced to here, and optionally 'Air Print', I chose! This works. Thus, it is apparently a bug in the HP - inkjet ink-SW-OSX - Mavericks_v12.34.51 driver installation routine if you attempt to add a printer during the installation / implementation, but if you install the new driver and then just go to System Preferences and add a printer, everything is ok ;-)

• HP Office Jet 6700 Premium: question of power supply?

  Printer was working fine. In the middle of the night, there was a power failure. Now, the printer does not illuminate. The power indicator led lights when the power supply is plugged into the wall. It will remain on until the adapter is connected to the printer. Then the light goes off. The light not come back up until the power supply is disconnected and then reconnected the wall. The printer is almost 3 years old in April. The brilliant minds of ideas of the internet?

  Does not look good. Be sure to try combinations of unplugging and pressing the power button to see if you can get the printer to wake up. If you are out of luck... no luck.

• HP Photosmart Premium C309g suddenly stops printing wireless

  I recently bought this printer. I've set up to print wireless. I installed and uninstalled twice b/c after about three times wireless printing, it stops wireless printing. Here is the order of events.

  (1) install the software according to the instructions

  (2) test page wireless printing, that always works

  (3) other printing things the same day wireless (works fine)

  (4) try to print something wireless as 2-3 days later

  (5) it does not. Get message of the staing HP Solution Center which is obvious: Document cannot print (duh). Through troubleshooting (Windows help). It tells me to make sure that it is the default printer (it is) and then check if it is online. It is usually not. So I choose to do the printer online (which is a sub-question, and I'm sure is related to the problem, why it keeps automatically be disconnected?)

  (6) attempt to print

  (7) message appears saying that HP Photosmart C309g-m offline (Solution Center)

  (8) read troubleshooting tips (HP Solution Center), which tells me to connect via USB to print (which annoys me because there is no available solution that tells you how to restore a wireless communication between the router/computer/printer)

  (9) which I did the first time around, but find that when I connect using the USB, it prints well. Any attempt to return to wireless printing is reflected in steps 7 and 8

  (10) check the connection of the application printer wireless network printing. Indicates that the printer is properly connected wireless. I know that my laptop is on the same network b/c that's the only one I have and my internet connection is not interrupted somehow.

  (11) get frustrated, uninstall and reinstall the printer

  Repeat step 2.

  This has happened twice already, and I bought it so that I COULD print wireless. He must be troublemaker solution Quen uninstall then reinstall the printer each time that happens (up to once a week).

  I have a laptop computer, a printer and a wireless router.

  have a Belkin g MIMO Wireless router

  I own a Dell Inspiron 1520 laptop

  I have a HP Photosmart Premium C309g (bought less than 2 weeks ago)

  I do not turn off the router or printer. Rarely I have turn off the laptop. Reset the router in the past has not helped. Turning and on the printer or the laptop in the past has not helped.

  Issues related to the:

  (1) how to prevent printing to offline on my laptop

  (2) how to restore communiucation between the printer and the laptop computer on the wireless network?

  (3) how do I keep the communication between the computer laptop and printer (and I assume that the router) to go Bye Bye?

  Thank you

  Kenya

  About what you suggest, the IP address remained the same throughout the facilities and absorption.

  However, I have thought of it. I guess that the wireless connection on the printer. I went back to the office and looked at my network settings. I needed to "find" my wireless signal. The first time that I've refreshed my wireless name does not show upward. I refreshed again and POOF! He was there! So I chose and put in my password (I think that his WPA encryption). When he finished the wireless network connection, it is printed on a network status page. Given that I printed this page so many times already I happened to have an old on my desk. I noticed that the IP address is the same (although today, I uninstalled and reinstalled again) on both forms. Anyway, when I returned to my computer (which is in my living room) HP Help Center had a giant green check mark on it and said that the printer is connected. Then I printed something and it worked! YAY! It would be great if HP put in information on the way to reconnect wireless when you get this message "the printer is not connected. Who knows maybe I needed to evacuate to understand! Laughing out loud

  So for everyone out there, if this happens to you:

  1) go to your printer

  (2) select the arrow to see the next menu. (it should be on the right side of the LCD screen, it looks like a triangle on the side)

  (3) select Setup--> network--> network wireless assistant

  (4) the printer will start to search for wireless networks

  (5) choose your network (or the network you are using...  It should be the same as your computer/laptop is on)

  (6) if it is password protected, enter the password/password

  (7) your printer will print a network status page.

  (8) your computer should "recognize" the printer on the network itself. Your HP help window can display a large green check mark (it's a good thing!)

  (9) print what you want!

  * Note I guess that you may need to do this each time the printer goes into sleep mode. Its not that boring!

  -Kenya

• I always get the internet on my pc but the wifi has suddenly stopped working on my ipad ideas. Thank you

  has stopped working on my tv too

  Contact the manufacturer of your TV and Apple.  If your Windows device works very well this means that wireless router works fine and so is your PC.

• HP 5530 e printer: my 5530 has suddenly stopped printing.

  My e-5530 not printed. The connectors are properly connected. Blu-tooth is running. I have the e-mail address of HP. The printer worked fine before.

  Thank you

  Hello AnnieRooney65,

  I want to offer a helping hand with the printing problem, that you have with the 5530 LIKE. You are unable to print, by means of printing, or you cannot print from the computer too? You have errors or blinking lights on the printer? Running the HP print and Scan Doctor can help us to determine what is happening, whether it's a hardware problem, driver problem.

  Start printing and scanning Dr. choose USB connection or wireless (based on the current connection) and allow to know the results.

  Hope to hear,