My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

Similar Questions

• ePrint HP Officejet 6500 All-in-One-Drucker - E709a

  Hello

  Is it possible to use ePrint with HP Officejet 6500 All-in-One-Drucker - E709a?

  Thanks Chris

  Hi Chris,

  The HP Officejet 6500 (e709a) does not support the HP ePrint service, that you will find listed in the following link:

  http://support.HP.com/us-en/document/c03722645

  Kind regards

  Shlomi

• Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

  I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

  When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

  When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

  The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

  Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

  I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

  My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

  In addition, perform both of these resets and I would like to know how they are!

  All-in-one HP printer reset - HP Officejet 6500 - YouTube'

  Have a great day!

• HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help

  HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works.  I looked for help & tried repeatedly, & am willing to renounce HP.

  Hello

  Thank you for using the HP Forums.

  You can try this alternative solution to Scan:

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  Let us know if it works.

• OfficeJet 6500 all-in-one - black line down page

  Our newly purchased Officejet 6500 all-in-One is the production pages with thin black lines down the page about 2/3 of the way through the page (right side of page).  Is there a solution to this problem?

  This was only happening with ADF.  After several cleanings with no changes, I found this forum.   After reading the plug on the glass, I went back and really clean the glass.  This has allowed the problem.  Thanks for the forum.

• My hp psc 1350 all-in-one has suddenly stopped working.

  My hp psc 1350 all-in-one has suddenly stopped working. I can no longer open the software by clicking on the icon in the dock.

  Sorry, but I thought that I had reported my all-in-one had started working again. Unfortunately, I can't say what went around, because I don't know.  I had only a small part of the way towards what we'll fix me it when he started to work again. I remember that there was a step that I have been unable to finish, and when I asked how to overcome this problem, it started working again. I don't even have the chance to follow the final instructions. I would rather know what was wrong and what are the fixed elements, but I'll have to settle for a working machine.

• My OfficeJet 7130 all-in-one wireless

  Dear reader,

  Currently, my OfficeJet 7130 all-in-one is connected to my PC computer by a USB cable and everything's fine.  I am planning to buy a laptop PC that will integrate a wireless installation.  To use my OfficeJet all-in-one to computer PC and laptop, I think of a print server with the dongle in a USB in my PC computer, will be necessary.  So far my research discovered only the HP Q6259A print server according to availability.  Unfortunately, my 7130 all-in-One is not listed as compatible with the HP Q6259A!  I would like suggestions as to overcome the difficulty.  My thanks in anticipation of useful answers.

  Kind regards

  BlackAndWhite.

  OK, just be wary that some USB hubs can create problems of connectivity between computers and printers.

  As the use of the printer is concerned, you can always give it to a local school to keep it in service.

• All-in-one Deskjet F3335 allows to print "black only" on the profile of a user, no other

  Hello

  I have an annoying problem with my all-in-one Deskjet F3335.  I print a lot of documents on my printer.  Rarely do I need to print anything in color.

  Since the acquisition of a computer running Windows 7 (x 64), I was not able to print in "grayscale: black cartridge only" on my profile; the only option is 'high quality '. (see image below)  I thought it was a systemic problem until printining something user profile on my husband.  His profile will allow for me to select "black cartridge only."
  

  I tried to uninstall and reinstall the software and updates. This did not help.

  Hoping someone out there might have a suggestion for me on how to solve this problem (and stop wasting my color ink)! Thank you

  As I understand it, you can change the printer to print in only black and white on a profile, but not on the other on the same computer. Is this correct?

  This type of question usually depends on the permissions available on each profile. I would hazard a guess that your husband is a Director or that there privleges more than your own profile. I check to make sure that your account is set up as an administrator first.

  Secondly, I would also check the 'Advanced' tab, that sometimes you can change the settings for printing color black and white or grayscale.

  Let me know!

• Will be A Officejet 6500 all-in-one printed my pictures from my camera using my sheets of Photo 4 x 6?

  Using Windows 7 64 bit and my all in one HP Officejet 6500 a can print photos from my camera on my HP 4 x 6 photo paper?

  The printer handle sheets of 4 x 6 because I do not see a photo paper tray I had in a previous HP printer all in one?

  Thank you for your help. Websites that recommend you explained what I needed to know.

• OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

  Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

  I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

  I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

  I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

  I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

  Am I the only one having this problem?

  I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

  Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

  http://support.HP.com/us-en/document/c02790693

  You can also reset you router. Unplug it for 30 seconds and plug it in again.

• OfficeJet 6500 all-in-one: Digital Imaging Monitor

  Is it possible to install only the HP Digital Imaging Monitor for the all-in-one printer 6500.

  Or is it possible to find it on my computer.

  I did the complete basic installation and this is, but then I lost it.

  I had to do a full download / install drivers, who worked...

• Can not reinstall the software/driver for the Officejet 6500 all-in-one

  I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all.  Installation stops at about 80% complete giving the error: Network Installation fails.  I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works.   My printer is detected by the computer and he "wants" install, but nothing works!  Wi - fi is on, and the only thing that I miss is the driver.  What is the secret of installing the HP online support site?  With the help of Windows OS 8.1.  Thanks for any help!

  Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong.   It turns out that I solved the problem myself with a lot of trial and error and perseverance.  The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.

  The computer has been grateful to the printer, but few of the functions of the printer did not work.  I kept getting notices that I need to be connected to Internet... and yet I was.   Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr.   The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.

  The error kept showing a network connection problem, but I had already restarted the router several times.  When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing!  Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page.  All is well again.

• HP Officejet 6500 All - in - One 709 a printhead printer resolution

  I want to thank Bob Headrick for his suggestion to soak the print head in warm water for 10 minutes.  It was a fantastic idea.  It does not solve the problem with my printer.

  I'm glad that I could help him.  For others looking for the solution for black not printing on the Officejet 6500 a, see the document here.  (Be sure to check the events on solution 6.)  If this does not resolve the problem then soak the printhead as shown in this post can help.

• HP Officejet 7410 all-in-One (wireless) will not be in service - seems frozen

  This afternoon the power came out in my office at home and after it was restored that my 7410 all-in-One printer stops working (bought in 2005).  I have unplugged and replugged and all I get is a blue screen on the digital screen with a circle with a line at 12:00 and the number 00000020 on the bottom.  The slight camera close the slots for memory cards also flashes on and outside.  No other light.  (Earlier the digital monitor comes to show the HP logo and a kind of hourglass linear downstairs).

  The Start button does not, not even if I press on during a long period.  Is there a way I can manually reset the printer?  Help, please.  I need to get out a presentation tomorrow!  Thank you very much.

  Yes, press on and cancel at the same time.  Got the FixYa.com site response.  Good luck.

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.