My HP Pavilion a 6130n shows no video

Similar Questions

• I have a HP Pavilion a1700n it shows the necessary updates, but its does not download

  I have a HP Pavilion a1700n it shows the necessary updates, but its does not download

  There is a program that addresses this issue.  It's called the system update tool.   Please select the correct version.

  The original specifications of this computer is Vista 32 bit.

• How can I set up the filter to just show me videos?

  How can I set up the filter to just show me videos?  Thank you!!

  HI Timothy Drury,

  If you know the file extension, you can apply the text filter, or you can sort the files by file type.

  Concerning

  Sarika

• HP Pavilion 500-164, upgrade the video card.

  I replaced the power supply in this area for a graphics card into the PCIE slot. I put a Nvidia 9600 GT in the box, not changed no settings, tried to start, and I get no bios and 6 beeps. Any advice?

  Based on specifications, your desktop HP Pavilion 500-164 has been bundled with Windows 8 installed and has a feature called 'Secure Boot'. You must DISABLE "Secure Boot" and ACTIVATE the standby mode 'legacy' in the BIOS before the computer will start with the nVidia 9600 GT installed.

  Please, remove the video card, make changes to the BIOS and turn off the computer. Then, reinstall the video card and turn on the computer. Your problem should be solved.

  Please see Computer Does starts is not after the installation of a videocard (Windows 8) for more information on the subject.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP PAVILION DV4-3008TX: cannot detect Video card (Radeon 6750 m)

  Dear Sir.

  I would like to know why my laptop can't detect my graphics (Radeon 6750 m). It shows that construction graphic card intel. I already try to use system restore and restore the original factory mode. It will appear but after updating my drivers and restart my laptop.  My laptop cannot detect the video card again.

  Please help me solve this problem

  for you reference

  http://Tinypic.com/r/2it67ex/8

  You will need to activate the card Radeon HD using the Catalyst Control Center.

  Once you do that the adapter appears in Device Manager.

  If you use the Intel HD graphics card, only the graphics card Intel will be seen in Device Manager.

  I know that may seem strange, but it's one of the features of having a switchable graphics capable laptop computer.

  The following URL goes to a switchable graphics overview. Take a few minutes and read it. It should help to simplify the understanding.

  http://support.HP.com/us-en/product/HP-Pavilion-dv4-entertainment-notebook-PC-series/5048648/model/5072629/document/c03048374

  Not install the Intel graphics driver separateely!

  This interrupts the switchable graphics feature.

  Install only the HP ADM ATI graphics softpaq. It will install the two drivers automatically and allow you to use the graphics switchable featrure og your laptop.

• text indicator showing in videos full screen

  So now it starts to appear in videos to youtube from tonight, it's really a little anyoing when you see a box at the bottom of the video showing "data transfer of...". "even if it's not doing anything you download a box DONE right on the play button. If you try to click on it, it it hover over on the right side.

  Do you use the extension of the status 4 Evar? If so, see: How to stop 'video data transfer' display on full screen shaking?

• Adobe Flash Player 11.4 leaves work, shows no video even after reinstalling.

  Adobe Flash Player 11.3 r300, and she had stopped showing videos, etc. in Firefox a few days ago. Now, I installed v 11.4 r402 and it still gives the message error "Adobe Flash Player... has stopped working." I uninstalled, downloaded again and reinstalled - with the same result. No video. Firefox Plugin check page shows it installed correctly. All solutions?

  11.3, one of the solutions was to disable protected mode. See this article from Adobe support under the heading of 'Last resort': Adobe Forums: how to fix protected Flash Player for Firefox mode? It still seems to be applicable in Flash 11.4.

  You might also consider back to Flash 10.3. However, some content may require new features of Flash 11.x. This article has the steps: Adobe Flash plugin has crashed - avoid that it happen.

• Yahoo News videos give the message "Sorry, this video is no longer available" in firefox. Chrome will show the video

  This happens everytime I try to access the video. Interestingly, it will show you advertising that plays in front of a video.

  I thought that the problem could be a plug, but plug-ins are up-to-date and I guess that Chrome uses the same plug-ins. I also had a problem trying to attach a file to an email in Yahoo. When I used Chrome there was no problem.

  It seems that there is some kind of problem with the way Firefox refers to Yahoo.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Unable to show youtube videos

  Failed to load Youtube videos. Am able to view with IE on the same computer. Have uninstalled and reinstalled latest Flash. Don't get not healthy. Only a black screen where the video is supposed to show. Can see the ads and Youtube Web page.

  Responses in this forum have shown different things worked for different people.

  For some compensation YouTube cookies and the cache solves the problem. For more information on how to do that see https://support.mozilla.com/kb/Deleting+cookies and https://support.mozilla.com/kb/How+to+clear+the+cache

  Others had to go further after deleting cookies from YouTube and block YouTube to save cookies. On the Tools menu, select Options to open the Options window. Go to the Privacy panel and make sure that it is set to "use the custom for history". Click on the Exceptions button, type http://www.youtube.com and click on the block

  Another option is to disable hardware acceleration for Flash. To do this right-click on a Flash video, select settings, go to the first tab of the option enable/disable hardware acceleration for Flash settings. This is something recommended by YouTube for those who have problems - http://www.google.com/support/youtube/bin/answer.py? & answer = 1209379

  You can also try to change the secure site of YouTube, https://www.youtube.com

• Pavilion H8 - 1160T: upgrade the video card

  My AMD Radeon graphics card failed (empty 1 screen, 2nd all the vertical lines on the screen) and upgrade to a 900 NVIDIA graphics card.

  As I understand it, my motherboard is a legacy bios and cannot support video cards that need a bios, UEFI (which would include 9XX NVIDIA cards).

  Based on the info below my first question would be... my bios from the motherboard to reset/upgrade of a UEFI bios?

  And second, if not, what would be my best option for a NVIDIA card?  6xx series? (game video and moderate flow)

  Thank you!

  HP Pavilion CPE series H8 - 1160T

  MB-IPISB-CH2 (Chicago) 16 MB of Ram

  AMD Radeon HD6850 graphics card

  Intel Core i7-2600 [email protected]

  Delta 600W power supply

  Bought: 26 Nov 11

  @55LongShot, welcome to the forum.

  55LongShot wrote:
  

  My AMD Radeon graphics card failed (empty 1 screen, 2nd all the vertical lines on the screen) and upgrade to a 900 NVIDIA graphics card.

  As I understand it, my motherboard is a legacy bios and cannot support video cards that need a bios, UEFI (which would include 9XX NVIDIA cards).

  Based on the info below my first question would be... my bios from the motherboard to reset/upgrade of a UEFI bios?  No, the motherboard may not be upgraded in the UEFI.  This is possible at the factory.

  And second, if not, what would be my best option for a NVIDIA card?  6xx series? (game video and moderate flow)  Yes, the latest video cards do not for UEFI were the GTX 660/670.  I suggest that you pick a card mamufacturer and contact their Technical Support for assistance.  MSI has a GTX 750Ti which is equipped with a switch so that it can be used with a Legacy BIOS.  You can check with them to see if will work with your motherboard.

  Thank you!

  HP Pavilion CPE series H8 - 1160T

  MB-IPISB-CH2 (Chicago) 16 MB of Ram

  AMD Radeon HD6850 graphics card

  Intel Core i7-2600 [email protected]

  Delta 600W power supply

  Bought: 26 Nov 11

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion Elite HPE-210f: update video card

  A PNY gtx 950 should physically be in a HP Pavilion Elite HPE-210f? I already know that I have to upgrade the power supply, but before shelling out more money, I figured I would see if anyone knew if the card fits?

  KKingotu, welcome to the forum.

  The problem you will have with the GTX 950 is, it requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on February 5, 2010.  There is no way to update the UEFI BIOS.  You can contact Technical Support PNY to see if they have a VBIOS update for the video card that will work with your motherboard.

  Meanwhile in the space provided, you can measure e/s rear plate on the front of the computer case to see if any of the components.  In addition, it is a wide double card (two locations).

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Desktop HP Pavilion 500-223w: upgrading my video card

  I have a desktop HP Pavilion 500-223w with integrated graphics card intel. I want to install a 3d ready geforce graphics card in the pci expansion slot. How can I disable the integrated video card? I went to the bios Setup, but has not seen something on the video card.

  Hello:

  When you add a video card in this model, the integrated graphics card is automatically disabled as it is on most of today's desktop PCs.

  If your PC came with the factory W10, you need to change two other BIOS settings.

  See this guide for what settings change... This applies to every PC comes with Windows 8 or newer installed.

  http://support.HP.com/us-en/document/c03653200/

• HP Pavilion Elite HPE-400Y no video output.

  Hello

  I have a HP Pavilion Elite HPE-400Y computer that I had stored (unplugged) in a bedroom closet bedroom for almost a year.  It was working fine when I put it in storage.

  This past weekend, I wanted to use, so I plugged in and connected to an analog VGA monitor well known on the integrated motherboard video VGA analogue connector.  When I turned on, there is no video on the monitor.  I searched the HP support site and found a statement that said "built into the graphics card or the card PCI Express x 16 slot are usable at once; they are not usable at the same time. "This computer came with a 5450 PCI express X 16 video card installed.

  However, the 5450 PCI express X 16 video card only has a digital DVI and I wanted to use a loose analog VGA monitor.  So I powered it turned off and physically removed the 5450 PCI express X 16 video card.  Then I unplugged the power cord and removed the CMOS battery for a few minutes.  Then I replaced the battery and applied again to power.

  I still do not get all analog VGA video out of the motherboard, not even the BIOS messages it is first energized.

  I also tried to integrated edge connector with a DVI equipped, monitor.  Still, there is no video output.

  So I removed the power and re-installed the 5450 PCI express X 16 video card that has only a DVI connector.  I connected to a monitor DVI equipped and applied again to power.  There is still no video output was two well-known instructors.

  When I turn on the computer, the fan power works, processor and fans of casing run, the blue led on the switch is lit and not blinking.  The Green LED on the motherboard is on.  The Green orange and activity led Ethernet link light are on.  There are no beeps.  I can hear the hard drive starts to work.  I have no video output.

  I use a HP USB keyboard and a USB mouse.  The red LED at the bottom of the mouse is not on.  The shift lock and lock lights number do not light when you press the corresponding key.

  This computer has spent more time of storage that it has been used.  It worked even when stored in a bedroom closet in bedroom.  I checked all the wire connections on the motherboard, with no improvement.

  I would like any suggestions to get this working of the computer.  I wonder if the motherboard has somehow that went wrong.

  Thank you for your help.

  Hello Big Dave,

  Thank you for answering my question / problem.

  I am aware that I can not use an analog VGA connection on the motherboard for a digital DVI input on my LCD monitor and vice versa.  I tried two different montors both analog and digital connections on the motherboard.  I tried to communicate clearly, but I guess that I don't have.

  It is unimportant, now that I've found that HP recognizes that my computer model had a drawing or a manufacturing defect that causes the exact symptoms I am having.  There is here a link to HPs extended warranty program that describes the patterns and symptoms:

  http://support.HP.com/us-en/document/c03199423

• Pavilion HPE 440F: need new video card for HPE-440F

  Salvation;

  The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

  I'm running Windows 7 x 64.

  Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

  For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

  Can someone point me to a list of compatible video cards for my system?

  Thank you

  Ubuntu_Kid

  p.s. My Linux box is not an HP.

  Ubuntu_Kid, welcome to the forum.

  The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

  Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion Media Center m8430f Desktop video card replacement

  For about a month now my desktop computer Pavilion Media Center m8430f is at the origin of the yellow spots, blue stripes and dots to arrive on the screen then the computer hangs. Moniter is a G185h Acer which I use from 2010 when the original monitor is released.  I also get yellow wavy lines then in safe mode.

  So the thought is the video card went bad and needs replaced.  I picked up a Galaxy GeForce NVIDIA GT 610 to replace the NVIDIA GeForce 8500 GT. Two questions - will be my Pavilion Media Center m8430fbe to handle this card? How could I go on install?  I checked the instructions to install a new video card, but none of them relates to my machine.

  I thank you in advance for any help or insght, you can give in this case.

  According to the specifications of your desktop PC and your new GalaxyTech video card, it should be a good fit and work without problems.

  You connected a different view to make sure that was not the view South instead of the video card prior to purchase of the video card?

  I will try to find a video for you on how to replace the map.  Fact!

  The video I found must be adapted. Your original PCI Express X 16 video card not a probably not power connector 6 pin which is described in the video, or the connector on the fan.

  The video author does not mention it, but for safety reasons, remove the power connector. Unplugging everything. Working with the PC as it does and use a table or a workbench with everything external to the offline desktop.

  How to open the case