my HP pavilion dv5_1110em lap top will not start

Similar Questions

• My lap top will not start now upward

  I installed the updates using the custom option, including hardware. My lap top now not start. I use Windows XP

  Although your experience seems more severe that much, it is never a good idea to get the hardware from Windows Update updates.

  The best rule on driver updates is: if it ain't broke, don't fix it.

  This means that, unless you have a problems with a device that you know will be set with a new or replacement driver or (b) need several new features provided by an updated driver, there is no reason to update your driver.

  Now that I told you what you shouldn't do, let's see if we can get you back to where you were.

  What happens when you try to start the computer?  If you get an error message, what is it (please do not paraphrase)?

  You can start the computer Safe Mode (F8 repeatedly just to tap after turning the power on tests)?

  Do you remember what hardware updates that you have installed?

  If you can start safe mode, log on using an account with computer administrator privileges.  You can use the built-in "Administrator" account (which should show on the homescreen mode without failure).  The default password (if you did not indicate a) is empty (that is, no password).

  If you can connect to an administrator account on the computer in Safe Mode AND you can remember what peripheral hardware (s) that you have installed new drivers for, then use the "Restore drivers" function for devices that you updated.  See
  http://www.TechRepublic.com/article/roll-back-your-drivers-with-Windows-XP/1046827
  http://support.Microsoft.com/kb/306546

  If you can connect to an administrator in Mode safe account, but you can't remember what hardware updates that you have installed, things are a little more difficult.   Ago that something called 'Safe Mode with network', but Windows Update is not working properly in Mode safe unless you start messing around in the registry, you cannot use this method to return to Windows Update to see your update story and determine what material you updated.

  However, assuming that you have not disabled the system restore, which should have created a Restore Point in the framework of the installation of updates and/or new pilots.  See http://lifehacker.com/193546/geek-to-live--roll-back-windows-with-system-restore
  IF you have made no changes to your system since you installed the updates (especially if you have not installed or uninstalled applications), then log in as a user with privileges "computer administrator" and launch the system restore.  See http://bertk.mvps.org/ Pick Restore Point the most recent that is before installing the hardware updates (drivers).  If you use a Restore Point before installing all the updates of this session, return to Windows Update and update any material 'critical '.

  Note that although you can use Safe Mode system restore, if you do, you can't "undo" restore operation - which is something you can do if you use the restore system in normal mode - so keep that in mind before doing a system restore.

• Pavilion p6 - 2120t: Windows will not start with the new graphics card

  Installed a Zotac GT 740 profile down in my desktop PC graphics card HP Pavilion p6 - 2120t and now the PC does not start.

  HP Pavilion p6 - 2120t CTO desktop PC

  Configuration:
  Intel Pentium CPU [email protected]
  4.0 GB RAM
  Intel HD Graphics Driver version Family: 8.15.10.2291 dated 27/01/2011
  Motherboard: IPISB-CU (Carmel2) (1 open PCI Express 16 expansion slot pins)

  BIOS to Version 7.18

  Running:
  Windows 7 Home premium 64-bit w/service pack 1
  Two monitors (VGA, 1 digital port 1)

  Before installing the new graphics card, I replaced the power supply original 300w with a 400w power supply.

  For starters, I disabled the onboard graphics in Device Manager. Then, I opened the case and installed the GT-740 in the open PCI Express slot. I made sure that the card was fully engaged in the slot.

  I plugged both monitors to their connections voted on the new map.

  When I tried to boot the PC, the digital monitor displays the screen HP (the one that indicates which key support to achieve the start menu) and then frozen. No other entries of key or mouse have been accepted.

  The PC then sounds 4 short beeps (about 10 seconds between each beep) and then a long beep before turning off the signal to the screen.

  Then, I removed the new graphics card on the PC that starts then. I have reactivated the original graphics drivers and the PC then worked normally.

  Tried the above process two more times with the same results.

  I then went into the start menu to look at the BIOS. The menu of the BIOS shows two options:

  > Sources of boot UEFI

  Windows Boot Manager

  > Sources of boot legacy

  ATAP I CD/DVD player

  SATA2

  Hard drive

  SATA0

  Network controller (Realtek PXE B06 D00)

  PC using UEFI Boot Manager Windows boots normally

  I have not tried Legacy Boot Sources because I don't know which one to choose.

  I went to the HP site and looked for an update to the newest BIOS, but updating them is a rev version 7.16 while my PC shows my BIOS to version 7.18

  I know that others have had a similar problem but I have not seen a solution that works for my PC.

  Any advice would be welcome.
  Thanks for your time.

  Hello

  Your PC isn't spec'd to run Windows 7 using the Windows Boot Manager.  I expect to a UEFI-based graphics card likely to work on an HP PC that does not have a BIOS version 8.

  The below listed OEM HP, graphics cards should work in your PC using a normal non - UEFI W7 and W8 installation.

  

• Pavilion dv7 3003el: Dv7 will not start

  My dv7 will not today, initialize it power for 2 seconds, then stop...

  Hello @Tomsellek,

  Thanks for the quick response!

  Given that the question seems to be hardware related, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Pavilion dv6 3111st: L will not start.

  I tried to remove my pc for the cleaning of the fan. But when it was impossible. There were cables that I couldn't even touch it, so I closed it immediately. Now, it is not turning on. I see the light when I plug in the power adapter. Other than that, there's no fan noise, nothing. Please help me. It is the cmos battery or does it I've damaged anyhing? If so how can I find out what s wrong?

  It turns out that I unplugged the cable from the switch by accident. It s now correct

• Can I use a 6 or 12 battery cells in my Hp Pavilion dv6 lap top?

  Can I use a 6 or 12 battery cells in my Hp Pavilion dv6 lap top?

  Hi, Anna M.

  Yes, you can either from batteries. It depends on the available slots.  12-cell batteries may be used longer than 6-cell batteries, but 12 cells are larger and heavier than the 6 cell. You need to contact HP because the problem is with the hardware.

  For more information contact HP.
  http://h30434.www3.HP.com/

  Additional information:
  http://h18000.www1.HP.com/products/QuickSpecs/12152_na/12152_na.html

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• my lab top will not update automatically

  my lab top will not update automatically.  I tried for 3 days and it seems to work very slow or it just freezes.  can someone help me please?  I am not at all computer bum

  Windows 7 update problems? First read this.

  :)

• Photosmart 3210xi top will not close

  I have a HP Photosmart 3210xi that top will not close. It was opned the same as you would to change ink carterage

  I wish I had an easy answer for you. These hinges are difficult to reach. You could give a few quick shakes up or carefully lift the unit a few inches upward and drop the table to try to unlock the hinges. Put something to protect the scanner glass where the top down.

  I don't think that the cold would damage unless it was very cold, is it possible, that the plastic can get rigid.

• Pavilion a6327uk will not start. Light output at the rear is enabled, all the work of 3 fans, but does not start.

  I have a Pavillion equipped a6327uk for vista 32 bit. I had similar problems before and remove all cables, hold the button to boot without the power connected, reconnect the and then turn on solves the problem. I suffered a blue screen, where I was told the computer was stop and spills of memory. Then I rebooted the computer froze and since then it will not start. I led on the power supply/process button cable about 30 times more than three days without success. The computer does not go to the HP logo screen, it just stops. Can anyone help with further action please.

  It could be almost anything that prevents your computer from starting to start to eliminate things.  If the computer under warranty?  If this is not the case, unplug everything including the power cord from your computer. Unplug the keyboard, monitor, mouse, readers flash and all other connected outside of the machine. Open the unit and unplug all the devices connected to the power supply except the motherboard.  Disconnect the hard drive cable and power supply data connection, disconnect the connection cable and power supply of the CD/DVD data, disconnect any drive card reader or floppy drive.  Therefore remains connected to the power supply should be taking 20/24 pin to the motherboard and 4 or 8 pin 12V for the cpu power cable.  Remove all cards that may be in the slots, as the video card, modem, network card (if they are not built in to edge of devices.) Just the cards that can be inserted into the slots.  Make sure all items are away from the computer and cannot cause a short circuit when you use power. Look at the motherboard and see if the capacitors were bulged or rounded top and maybe even a brown substance leaking from the top.  Check the video card as well for the same and a blocked fan who may have been not turn.  Test the power supply with a volt/ohm meter if you have one. If this is not the case, turn on the power and see if the fans are running and you get beeps.  If this isn't the case, hold the power button for about 5 seconds until the machine turns off.  Try only a chunk of memory at a time and in each of the slots.  If it starts to act normally, it is probably food.  If the sounds seem normal, unplug the power cable and install one at a time from the video card and connect the monitor to it. Plug the power cable from back in and start the machine.  If you have a video, keep disconnect power, adding another device such as the keyboard and the mouse until you arrive finally to your hard drive.  Do your last hard drive because there all your important data on it and you do not want to expose to all this test.

• I nned to know the procedure I use to get can Mac 2008 Desk top that will not start. I don't know how to connect two computers, my portable Mac Air 2013 on my desk, now I need to know how get the workstation files in order to appear on my mac air so I can

  Does anyone know how after I connect to my office 2008 Mac (which will not start.) to my computer laptop (2013 Mac Air). What are the steps that I need to know to get the Desktop files is displayed on my mac air so I can copy files to your laptop, especially my Itunes folder.

  Thanks Jerri

  If you can't get the iMac began and ongoing implementation, you will not be able to use the target disk Mode:

  https://support.Apple.com/en-us/HT201462

  Then the option is to take the iMac HARD drive, install it in an enclosed, and connect the HARD drive to the MBA via the USB port.  If the HARD drive is recognized, you can copy the data out of it.

  Ciao.

• Pavilion ID46 g6 will not start

  Product: Pavillion g6 ID46

  [Edited by Moderator] Serial No.

  Product # A6Z74UA #ABA

  OP sys: Windows 7 Home Prem OA

  Pavillion G6 my husband will not start. What happened: returned to the computer after being away for a while, shook the wake up the mouse and the screen «has exploded in many colors and motion pixels» Screen went black, then a screen "do you want to start in safe mode" popped up. He tried a start-up without danger, but he failed and gave him a Bios Application error 501. He tried to restart the computer, but it crashes on the 'Starting Windows' screen with 4 color icon.

  I have:

  Removed the battery and tried to restart. Not good.

  Has taken the hard disk and and reinstalled it. Ditto.

  Tried to boot mode safe, before and after the following below. "Loading files" still stuck on Windows\System32\drivers\CLASSPNP. SYS

  Burned and ran a repair disc. Took 4 hours and the program ran at the end when I was asked to reboot. Computer hooked on "Starting Windows" screen. (I left this screen function for more than 5 hours without this change.)

  Ran the program System Repair twice, same results.

  Start of Tests ran. After self-test of the main hard drive, hard drive SMART and verification Test of memory system (passed 100%)

  Tried to restore the BIOS using Windows + B and power with several attempts. Button Power LED stays on, about 20 seconds later a small LED on the "caps lock" key flashes white twice. Black screen and nothing happens after 5 minutes. He raised his eyes and 2 flashes is supposed to be the corruption of the BIOS.

  Error log lists these: quick 03F0 303, 501 error and error of hard disk 1.

  I have a lot of intelligence of the computer, so appreciate any help you can give, especially if assistance is simple and easy to follow terms.

  Mahalo in advance!

  Well, nothing worked and I did not attempt to remove the HD and turn it on again. Husband returned to a comp sci student who managed to get some info on the HD, but said that the HD was shot.

  Good thing is that I got a new Asus laptop and put my old computer to my dear husband. So, I guess that the problem is solved!  Thanks for your help.

• Help, please! Pavilion 754n no display will not even show BIOS

  First, it has a 80gig HARD drive, everything worked fine initially, then I changed hard drives and put it in a concert 20, have all two XP on it, I wanted to see who was on the 20, after I plugged it in and pressed the power button there is no response, nothing on the screen. The power button is green, then he went to orange, the fans kicked on and other that that there was no noise, stay like that forever. So I thought (OK something wrong with the hard drive), which is weird, because I know that the HARD drive works (and I have tried since and it does not start on another PC). So I put the original, when I hit the power button is the same thing, it's been like that since, I tried two other HARD drives.

  Is troubleshooting I've done so far, reset the CMOS on the map, unplugged everything on the Board and reconnected it looking for the loose cords and the like, tried different riders on the original drive eventually return to that I started on what he did start from the beginning, tried to take all of the ram on resettlement try each stick in each slot try diff ram total, trying to start between each step, tried another CPU that I know works, I tried to start the original disc 80gig HARD on a Dell bios page, it says (error reading disc press F1 to re - start) I press F1, 5 - 10 times it will not start, something happened to this drive while it was initially on the dell HDD then I put the 20gig in the dell and it starts fine. If I put this concert 20 HP I get the same result as above, so I know it's not a hard drive issue, obviously because even with no DISK in the HP, I should get at least to the page of the bios that I can't.

  So I narrowed down it to the mobo, and my question is has anyone at - he heard a simple commutation of the HARD drives causing a mobo don't not working? Also any ideas on why the disk HARD original stopped working after spending the 20gig and then back? Can anyone think of stuff or procedures to try that I have not already?  Thanks for any help!

  Yes spend hard disk could negatively affect the motherboard if connected to ground or precautions rules were observed. Have you been paying attention to connect you to the case? Any discharge of static electricity on your part to the Board of directors could have killed the jury. I can only suggest you remove the MB and place it on a surface antistatic is to say cardboard and connect only the 20/24 pin and 12v atx power connectors. If the jury does not appear now so it is safe to assume its dead. If it should power up you know now it is shorting out on the connections or the case. Good luck.

• Firefox will not start after update

  Firefox will not start today. I think he had an update yesterday.
  Click it, lift the loading symbol, but never implemented. In Task Manager it is a firefox.exe * 32 running. Have you tried to uninstall, delete Mozilla Firefox folder in Program Files x 86 iti also tried to suppress the appdata profile (after saving the Favorites and passwords). I can't even boot up in firefox safe mode and can not get to start Profile Manager. If I start (7 x 64) of windows in safe mode, I can start firefox. I use Norton Internet Security. I checked the settings of firewall smart and experienced of firefox is still set to allow. I tried starting firefox with smart firewall turned off and firefox still refuses to start
  Renounce top almost ready

  Hello ziggy1, as this can sometimes be caused by a malware active on a system, please run a scan with tools of different security like the free version of malwarebytes, the adwcleaner and the scan to microsoft security.

  Fix Firefox problems caused by malicious software

• Recovery disk will not start on Satellite 1110

  I try to use the recovery on a Satellite 1110 CD. I want to just install fresh Windows. The necessary files are supposed to be on the Toshiba recovery CD that accompanies it.

  So I did what the brochure says, and booted up the laptop to the top with the correct CD in the drive, while pressing 'C '. The notebook ignored the CD ROM and loaded Windows as usual. I repeated three times, each time that the CD ROM whirs a bit but will not start and Windows loads as usual. I have replaced 'C' for F12, chose the CD ROM drive in the list and repeat the process several times. Yet once it wouldn't boot from the CD-ROM.

  I looked at the content of the CD ROM A single MB 447. File of the GHS. The file icon is that generic type "Windows does not know what program this icon is intended to" deals.

  Google believes it is a ghost file and must the ghost installed to run it. This bitch never came with Ghost.

  Anyone here knows a remedy to this problem?

  (NB - I tried clean Windows system restore option, but it just brings back me to September this year. Theres no option that was more early in life for portable computers)

  I am in the United Kingdom, and is a UK machine if that makes a difference.

  Hello Micha

  Is this your ODD works properly with the operating system?

  I put really know what exactly is happening here, but please make sure that you start with recovery CD number 1/2 2/2. The installation of recovery, you can just start with the first recovery CD. Also try please set CD-ROM as firs boot device in the BIOS.