My HP Pavilion DV6 will not start after replacing the screen

Similar Questions

• Windows will not start after replacing the motherboard

  To begin, I must say that I am pretty clueless when it comes to computer skills.

  To summarize, I sent my CPU to a repair shop when my computer has stopped working. I removed my hard drive before starting the repairs because it contains confidential data.  They have narrowed the cause to a faulty motherboard and replaced by a new dissimilar.
  At the store, the guy had a vista 64 bit recovery disc so I have it home and tried to fix it. He said it will be a breeze and relatively bug free. As part of the Startup Repair, I tried to drive the Startup Repair, and tests were all successful except one. An error of diagnosis readings

  "Unspecified system configuration changes may have caused the problem.

  Repair action: repair and checking the integrity of system files

  Result: failed. Error code 0 x 490

  time taken = 720023 ms

  Everything I've done has led to a brief blue screen to the Windows loading screen and then it restarts itself.

  I also tried to restore to the previous two points, but it has also led to the square - a brief blue screen after the loading screen and restarts on its own windows. I'm not ready to reinstall vista and I can't afford to do it too, because I don't have enough disk space to perform another installation. Nor am I willing to reformat one of my two disks.

  If you need additional information on the specifications of the material that must be provided, ask me.

  IM at my end intelligence now, and I really hope to solve this problem.
  Thank you.
  Bryan M

  Hello

  I'm sorry, but you have to completely reinstall the operating system after replacing the motherboard with a different motherboard.

  "Startup Repair" is exactly that: a start NOT a repair system repairs

  What has happened, it is the operating system on your hard disk contains the drivers for the old motherboard and does not and you can't change drivers in doing what you do.

  The only way to solve this problem is to reinstall Vista.

  You wipe the hard drive and restart and make sure that the repair shop gave you the disc to install the new drivers of motherboard after you reinstall vista or download on the website of the manufacturer of the motherboard.

  And here a question for you to consider, too.

  If you bought a copy of Vista retail yourself, you can use the method above to a new installation and then install the new disk motherboard drivers.

  But, if your computer is a trademark of purchased manufacturer, HP, Toshiba, etc., you can not change the motherboard that the license of Vista OEM is stuck at motherboard the origin of the manufacturer that it has been installed on and now you canceled your Vista license.

  See you soon.

• Vista will not start after replacing the motherboard

  The motherboard in my Dell Vostro 220 died for the 2nd time, and this time it's out of warranty. Not wanting
  

  another cheap/defective board from Dell, I bought a compatible Intel replacement from Newegg. After I put
  

  the replacement board in, Vista won't boot. Dell didn't provide an actual Vista cd/dvd, but rather their generic
  

  repair/driver cd, so I can't just reinstall Vista (32bit). I understand that Vista may have problems with the new
  

  motherboard, but didn't realize it wouldn't give me better opportunity to load new drivers from cd that came
  

  with the motherboard. Am I just screwed and going to have to buy a new Windows cd/licence? The log below is
  

  what Windows is reporting:
  
  Problem Signatures1  Auto Failover2  6.0.6001.18000.6.0.6001.180003  64  1966115  Bad Driver6  Bad Driver7  08  19  System Restore10  0
  
  OS Version 6.0.6001.2.1.0.256.1
  

  OK, thanks to a thread on DANIWEB here is the solution to my problem - Hiren BootCD (v15.1). MiniXP to start and run difficult HDD controller app. This allowed Vista to boot far enough to get the cd accompanying the motherboard. Later, life is good, Vista hasn't even complained on the new motherboard and licenses.

• HP Pavilion g6: HP Pavilion g6 Will not start after Windows regular updates

  This problem actually happened for at least a year now, but it became much more common. Whenever my computer performs an automatic Windows update and rebooting, it does not go back to the desktop. I'm stuck on screen of HP with a spinning wheel.

  He can simply sit this way for hours, unless I intervene. I normally hold the start button to turn off and try again, or remove the battery and try to start only on current alternative, but normally, it will take an hour to turn it off and reboot before it finally starts normally. Androgen HP will try to run an auto repair but that never solves anything and sometimes it won't really work repair at all - I get simply stuck on the screen to 'Diagnose your PC' for a long time.

  It's frustrating because I know that whenever I run an update of Windows, I am for an hour before you can use my computer. I've seen the question asked on a few other sites but no clear answers - anyone know what is causing this problem and how I can avoid it in the future?

  Take a read of the Microsoft documents at the following Internet address.

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  The first thing you should try is the Windows Update utility.  Download the file from the link and run it. This is for Windows 8.1.

  The troubleshooter should help guide you through this.

• Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

  Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

  Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

  Hello
  To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

• Vista will not start after replacing card mother HP machine

  * original title - new motherboard (gigabyte) replace dead on (asus) and vista don't launch *.

  What should I do to continue using my original copy of windows vista on my hard drive. Or am I intended to buy a new copy?

  I had a hp built machine with vista as os. the motherboard went bad, so I replaced it. Now I can not get Windows to start. All the hardware seems to work fine, bios is fine.

  The configuration is now:

  original Board was asus

  New Board of Directors is gigabyte

  same disk sata hard with vista os top

  same Pentium dual core cpu

  new graphics card

  What should I do to continue using my original copy of windows vista on my hard drive. Or am I intended to buy a new copy?

  I had a hp built machine with vista as os. the motherboard went bad, so I replaced it. Now I can not get Windows to start. All the hardware seems to work fine, bios is fine.

  The configuration is now:

  original Board was asus

  New Board of Directors is gigabyte

  same disk sata hard with vista os top

  same Pentium dual core cpu

  new graphics card

  Hey fzsq5s

  you have also an activation problem because your hp vista oem license is bound to the original material that it came installed

  read the information about the oem and sales license in detail below

  If your computer is pre-installed with vista, it is classified as an oem license and it is related to the material that it is 1 installed on

  as in the foregoing any case at level or the replacement of the motherboard will be done in collaboration with the manufacturer of the computer in your case hp

  If he had a retail license you might have upgraded or replace your motherboard you

  but you then have to reinstall vista as the old drivers of the motherboard would be still installed

  I hope that the foregoing explains things

  Walter, the time zone traveller

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• Will not start after installing the Vista SP2

  Last night my old Vista SP2 computer.  Installation seems to have success, but to restart the computer as part of the installation of automatic update, it failed.  During a part of the boot with a screen similar to BACK sequence, it arrested, printed a msg that appears to be in hexadecimal and would go no further.  Restart with a sequence of hot or cold start to produce the same result.  I tried to correct the problem by using the Startup Repair on the Vista installation disc and received a msg that Windows could not repair the problem itself.  I sent the results to Microsoft using this option in the Startup Repair tool.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your can fall into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  More information shows what the process that it loads.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite Pro S300-120 does not start after replacing the CMOS battery

  Hello

  My friends laptop - a S300-120 - was having a few problems.

  I replaced some parts about this before, including a screen crack with no problems.

  However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

  It does one of two things.

  It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

  Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

  I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

  The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

  Any ideas?

  Hello

  (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

  POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
  Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

  In my opinion, it looks like a problem with the motherboard :(
  Eventually, you will need to replace the mobo ;(

• HP elite m9340f: do not start after replacing the video card. Repeating short and long beeps. Help!

  Hello: I have a m9340f HP Pavilion Elite aged five years, under vista. He had a problem with video output, so I bought a new video card and exchanged out them. but now, the computer does not start and made that one short beep and long stretch trying to power upward.  I double checked all connections and they are all good.

  Please help me if you know what the problem is.  Thank you... KarlJ

  I found that 1 beep short, followed by a long beep indicates a memory failure, try reinstalling your memory

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Pavilion dv6 2170 clock problem after replacing the CMOS battery

  Hello world. Sorry for my bad likely English

  OK, so the problem started since I changed my laptop CMOS battery. and to be honest it wasn't whit any problem the clock when I replaced it but I if this may be the cause of another problem that later I figuered what the problem was because of the RAM.

  in any case, I changed the Rams and this problem has been resolved. I just set the clock of the BIOS and rebooted the system. After awhile I figuered that windows clock is not fair. I restarted again and saw the BIOS clock. It has been reset for 2009! even when the laptop battery and power supply are attached the BIOS and windows continues to change clock! I even changed my windows and I replaced the CMOS battery with the former, but nothing helped. It seems really strange, but I don't think it's maybe a hardware problem there a driver or something for the CMOS battery... need your help! Thank you!

  You mentioned that the BIOS has been reset for 2009? This means that there is a problem with the current or any leak and the BIOS has been "reset" back at the root of the plant. I'm afraid you have shorted something when you changed the battery not be grounded.

  Worst case is that there is physical damage to your motherboard and there is nothing you can do about it, probably broken a capacitor - who cannot hold a charge to prevent the reset of the BIOS clock.

  However, you can try this.

  Completely, unplug your computer, remove the laptop battery, etc... Then browse 'Guide' your computer for the "hard physical reset" for your CMOS. I don't know what it's like on a laptop, I only did it on desktop with riders. Be sure to follow the directions precisely.

  -Make sure you are properly grounded. touch the metal parts that is grouned before touching anything on your computer.
  -the hard reset should be done for at least 30 seconds, this ensures that the power is completely served the system. Then you can set this back.

  Try this a couple of times, first without removing the CMOS battery and 2nd time after remove CMOS battery and placing it in.

  Good luck.

  BTW, you can also try running without your new memories (if there is more than 1 stick, try them separately). In fact, I would probably try first before doing a hard reset CMOS. The reason why I didn't say earlier, it's because I have assumed that you already tried this.

• Re: L505 does not work after replacing the screen

  I had to replace the display screen on my Satellite L505 due to the 'accident '. After finding how to get instructions on the line, I was able to do the job, seemed ok, but it having moved up the screen on, but nothing else. When replacing at any time I felt an electric shock, so I do not think that the fried motherboard. He would have anyway? If this isn't the case, motherboard, would this inverter replacement needs. The accident was due to a piece of hardware that was sitting on the keyboard when my dog (the awkward beast) sat down on my satellite (I used it in his bed), the screen cracking. Help would be appreciated knowing what it could be.
  Thank you

  Hello

  I don't think that someone will help you in this forum. Who knows what happened... You must contact the Asp (SAV). Please, please understand me, it's hardware related problem that needs to be diagnosed by special service tools.

• Laptop Dell XPS 13 L322X: 8 beeps start after replacing the screen

  Hi all

  I have laptop computer Dell XPS 13 L322X (serial number: CC2YVW1).  I use an external monitor because the screen is flickering with vertical lines and ghosts of the colors. I've updated the Bios and the driver video and tried the diagnostic mode (power and the D - key... and) without success.

  I just bought a new replacement compatible screen but the I cannot start using the new form and meeting the 8 beeps are heard. I tried to start with the external monitor and using power on the laptop with the D key, the new screen of the laptop began to switch colors four times and return the sound signal.

  I tried to disconnect the battery and the AC power and maintain the power to drain the left stored energy from capacitors without success.

  Thanks in advance for your help,

  Sala

  In this case, return the set of sieves of replacement - it's probably the cable is bad (but since it is an integral part of the screen, the set should be replaced.

• Lightroom 3 will not start after replacing hard drive

  I just recently replaced the hard drive on my IMac. All files and applications provided in the time machine up to the top by car. LR appears on the dock, but when I open it it comes up with:

  "The Lightroom catalog called"Lightroom 3 catalog"cannot open another application already has its opening" and "Leave the other copy of Lightroom before trying to launch."

  What do I need to reinstall from the LR DVD LR3? I don't want to use loose structure of the catalog and edit information.

  Any advise?

  Thanks in advance.

  Look in the folder that contains your catalog and see if there is a present .lock file. If so, remove it and try again.