My HP Photosmart D110 printer will not turn off unless I unplug it. Help please!

Everything works fine on my printer except that it does not turn off unless I unplug it. Can anyone help?

Is it updated?  Assuming that it is connected wireless network and that Web Services are enabled on the front of the printer: configuration > Preferences > product update.

Tags: HP Printers

Similar Questions

  • HP Photosmart D110 printer will not install with Windows Vista?

    HP Photosmart D110 printer will not install with Windows Vista?

    Hello

    (1) what happens when you try to install the printer?

    (2) you get an error message?

    Method 1: You can run the fixit available in the link below and check to see if that makes a difference

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

    You might want to know

    Add or remove a printer

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ---------------------------------------------------------------------------------------------------------
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • my printer will not turn off

    Office Jet 6500, wireless, printer will not turn off.

    Disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  • Photosmart d110 printer: Photosmart d110 printer will not connect to Google Cloud Print, can't get printer e-mail address

    To begin with, Yes, I searched HP and FAQS forums for an answer before you hit this place.

    And Yes, I have turned off and back on several times (the wireless and the printer itself).

    OK, so I just bought an ASUS Chromebook and I tried to connect my HP Photosmart d110 printer to the ePrint service every DAY. I know I have to do is enter the email address of my printer in the Google Cloud Print for it to connect, but I did have a success in getting. Whenever I pull up the "Web Services", it says that my printer needs to be updated... but when I try to update I get the message, "your printer has the latest updates installed. There is no new update at this time. »

    Any help or suggestions would be greatly appreciated!

    Hello

    Please try using the HP Print chrome extension to see if that helps. I've included the instruictions for installation here.

  • LaserJet P1102w: Double-sided printing will not turn off

    Even if double-sided printing is NOT selected in the printer properties, printing all ask for double-sided printing.  So if I go to print a single page printjob, the computer asks to have the blank page that was 'printed' just to get back in the tray.

    How can I get this fixed?

    Hi @Skunkeeper,

    Welcome to the HP Support forum.

    I understand that you use a HP LaserJet Pro P1102w printer with a Windows 10 computer and when you try to print a single page, the printer ejects a blank page and ten invites you to put in the tray, so the second side can be printed, even if double-sided printing is not selected. I would like to help with that.

    This really looks like a software problem. I would like to start by running this HP print and Scan Doctor. It is a tool that allows you to diagnose and solve the problems of printing software and printer.

    Please let me know if that solves the problem, or if you need assistance.

    In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Printer will not turn off

    When I tried to print a photo, 'print picture', "remove red-eye" and "power" button and the indicator "wireless network" will begin to Flash.  I cancelled the print job and tried to put off the printer.  When I push the power button the initial screen appears for about 10 seconds and C2FE0162 (I think) flashes twices for less than a second, followed by the screen turning white and the lights flashing.  I tried unplugging the cables, etc., but can not get the printer to turn off or reset.  Help?

    Hi Frank_Ru,

    I understand that you have an HP printer that keeps giving you flashing lights and does anything currently. I'm sorry to hear that, but he's going to do my best to help you after collecting a little more information

    1. what model HP printer work?

    2. is the printer connected directly to a wall outlet?

    3 have you tried pulling the power cord for a few minutes and reconnect?

    I can't wait to hear back from you, have a nice day!

  • K010 ENVY: my laptop will not turn off

    Hello

    When I shutdown/hibernate/standby/resume my laptop, it will die completely.

    All programs will be closed (when stop or restart) and I think that OS will also close. But the laptop will not turn off. Power LIGHT and fan will stay on.

    And when I try to Hibernate, everything is ok, but I have the same problem.

    Whenever I have to turn it off by holding the power button, otherwise the battery will be discharged.

    After manual turn off, when I turn it on again, everything works correctly:

    -If hibernation: OS will continue to last situation.

    -If start/stop: OS works normally without error or warning.

    After sleep, OS works from the beginning. Because the data stored in RAM and will be deleted after power off.

    Perhaps a portable automatic perevent equipment turned off. All the drivers are up to date.

    Is there a parameter/software to check and fix my problem?

    Thank you

    Hello

    You are welcome

    On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

    You can use the following method to install an earlier version of the driver IMEI.

    Download driver IMEI on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

    Disable your wireless card (should be f12 ).

    Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

    When finished, restart the laptop.

    If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

    https://support.Microsoft.com/en-GB/KB/3073930

    Kind regards

    DP - K

  • My laptop will not turn off...

    My laptop will not turn off, even if I push the power button for 10 seconds.  The only way is to get out my battery and unplug the unit.  It started immediately after an update about two weeks ago?

    Hello

    ·         This happens even when the power chord is connected?

    ·         What is the brand and model of the laptop?

    Method 1:

    I suggest you to check the power settings on your laptop in safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

     

    Method 2:

    I suggest you put your computer in a clean boot state, and check if the problem still persists. Click on the link below to find out how to perform the clean boot in Windows vista.

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

     

    Method 3:

    I suggest updating the latest video drivers on the manufacturer's Web site, click on the link below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/automatically-get-recommended-drivers-and-updates-for-your-hardware

    Check out these links for help:

    http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

    I f the problem persists I suggest you to contact the manufacturer of the laptop and check if it helps.

    Kind regards

  • Pavilion dv2415nr laptop. It will not stop. I downloaded the software and it will not turn off.

    I have a laptop dv2415nr Pavilion and it will not turn off.  I recently downloaded some security software and it is not stopped since the download.

    Hello

    I recommend that you make sure you have your license key for webroot. Uninstall the software and reboot. If that solves the problem, it's time to go to the Webroot support and ask their tech support that it.

    Kind regards

    ERICO

  • My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

    I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
    I turned off the printer, but nothing helped.

    Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

    However, once more, I thank very you much.

  • 8500 HP OFFICE JET PRO 8500 A909n error: B87126D0, unit will not turn off or print

    I'm having the same problem as described by others, "error of 8500 HP B87126D0, unit not turn off or print.

    I followed all the instructions from documeneted on this thread. I also replaced the power Module, in the hope that would solve my problem. I have an OFFICE JET PRO 8500 A909n PRIME

    Not sure why the solution cannot be posted here, as I see many others with this same error and the exact symptoms.

    Whatever it is, I really appreciate a solution 'private' as well.  Really, I love this printer and would rather not have buy another.

    Thanks in advance!

    Hello @rnegron57,

    Welcome to the Forums of HP Support! I see that you have found an error code on your HP Officejet Pro 8500 first, you are unable to power the printer on or off.

    You have completed the recommendations online without success, and you've seen other members of the community receive private messages. I would like you to take a look here: printer resets: What You Should Know

    I went ahead and you sent a private message, please go to your user page to the right of your name, you will see your Inbox.

    I'll watch for your reply, I would like to know the results.

    Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  • Peripheral 2270Dw HP printer. Toner replaced with unit other than Brother and Toner light will be will not turn off and the unit do not print.

    replaced with Non-frere unit "and" toner light toner unit does not turn off and the printer will not work.  How can I reset?

    Hello

    Do you use the HL-2270DW printer?

    Follow the steps in troubleshooting mentioned in the articles below:

    Why can I not print?

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    Print the problem - troubleshooting

    http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/faq_list.html?reg=us&c=us&lang=en&prod=hl2270dw_all&cat=112

    If after following the steps of troubleshooting mentioned in the article above the problem persists, I recommend you contact the manufacturer of your printer by clicking on the link

    http://www.brother-USA.com/support/custserv.aspx

    http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/monolaserpri/hl2270dw_all.html?reg=us&c=us&lang=en&prod=hl2270dw_all

    He hopes to help!

  • HP officejet 8500 a 910 will not turn off

    I have a 8500 a which worked well in the past. It is set up as a network printer. last week went to use the printer and the power button has been lit in green and then dimmed and then back to green, a slow pulse glow. I couldn't be able to top or power down. LCD screen was also incarcerated. I have one plugged in the unit from the wall and waited a few minutes. Clogged again and it went through the start of the SS.  tried to no print, no luck, lcd screen calmed locked and I can not turn off the machine using the power button.  Help

    Hello

    Please perform the below mentioned steps that should solve the problem.

    • Unplug the power cord from the back of the printer.
    • Power to the router.
    • Connect the power cord to the printer. If the printer does not power ON automatically, then press the power button on the printer.
    • After the printer is in sleep mode, do a copy of the document or image.
    • Now, you can power on the router

    Please call the HP Technical Support for assistance.

    If you are in US , toll free # is 1-800-474-6836.

    If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

    Kind regards
    Jabzi

    Give Kudos to say 'Thank you' by clicking on the White Star under my name.

    Click on 'accept as Solution' if it has solved your problem, while others may find it.
    I work for HP

  • Windows 8 Visual AIDS will not turn off?

    In Control Panel > accessibility > Ease of Access Center > use text or Visual alternatives for sounds.
    I have unchecked everything, boxes, choose 'none' for "Visual alert has chosen" and it does not turn off.

    Is anyway to fix this or reset the ease of access/panel seetings?

    Hi Dominique,.

    You may experience this problem if the Windows system files are damaged. First try to restart the computer and check. Follow these methods and check if that helps:

    Method 1: you cannot reset the accessibility settings, but you can try to perform the system restore and check if it helps. Follow these steps:

    1. Press the Windows key + R
    2. Type rstrui and then press ENTER.
    3. Click Next and choose the restore point, when your computer was working fine.

    For more information, see: How to restore, refresh or reset your PC

    System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

     

    Method 2: I suggest you run the tool (SFC.exe) System File Checker and check if it helps. The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    Run the System File Checker to see if you have corrupted system files.

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833/en-us

    Additional information: text use or alternatives to the Visual sounds

    http://Windows.Microsoft.com/en-us/Windows-8/use-Visual-alternatives-sounds

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • MacBook will not turned off properly

    Hello

    my MacBook Pro 13 "2013 retina is not turned off properly after installing macOS Sierra.

    It takes about 20 minutes after clicking n closed. The screen is black and miss me closed animation (this circle loading bit). After a long time the circle appear and it takes 10-20 seconds (normal closing time) to shut down my computer.

    To me it seems that there is a program or task that can not shut down properly.

    How to see what program slowed down the process of closing?

    Thank you very much for your help!

    You can try a SafeBoot to clear the cache of the SafeBoot https://support.apple.com/kb/PH18760?locale=en_US files

    Try resetting the SMC http://support.apple.com/kb/ht3964

    Try resetting the NVRAM/PRAM http://support.apple.com/kb/ht1379 memory

    The recovery utility (R command at startup) try disc > first aid on your Macintosh hard drive

    You can always try reinstalling macOS 10.12 on top of your existing macOS 10.12

    Always good to have a current backup plan: make a clone of your boot disk bootable

Maybe you are looking for