my hp presario says 'boot mrg is missing' and only load windows 7 can correct with the recovery disk

Similar Questions

• The recovery disks do not work for the hard drive replaced in my Presario CQ4010F desktop PC

  Hi all

  I have a Compaq Presario CQ4010F Desktop PC (Windows 7 64-bit) in which the hard drive went bad. I bought a new hard drive which is a 1 to, the failed drive was 500 GB. So, I ordered disks system recovery, four in total. The disk labeled 'Use this first!' appear to be running fine, then prompted me to launch the next disc, which I assume is the 1 of 3 system recovery disk. With the computer, always, I inserted the CD 1 of 3 and have waited and watched as nothing has happened. I restarted the PC with the 3 disc 1 again and that will inspire nothing happened. Any help is appreciated in this matter.

  Hello:

  If you can't get the recovery disks to work (don't make sure that the keyboard, mouse and monitor are connected), then you can make your own windows 7 installation DVD and use that to at least get windows 7 installed and your PC back to the operation.

  Here's how.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Satellite L750-1LC - Boot Manager is missing by using the recovery disk

  I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

  On the first dvd that only he came an error reading twice, the other DVDs were ok.
  When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

  After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

  Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
  If so, what are the steps to qualify for this promotion?

  I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

  It seems that the first recovery disk is not created properly because you got an error message.
  As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

  Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
  I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

  PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

• Boot Manager is missing and the Messages from Stop blue screen.

  Hi Henry here, I lost my Windows Vista disk and I reformatted my hard drive to use my Windows XP. So I ordered a recovery Windows Vista Home Premium SP1 of HP Distribution Center System. When I try to install the recovery system. I get messages from stop and disk boot manager is missing. I have to buy a disc of Windows Vista all over again? or what I can do to fix this? Henry

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Explorer says he has stopped working and it does not restart. I tried the system restore, but will not return to explore

  I can't get rid of this pop up asking to restart or online solutions. I chose these two options in the last days and even managed to get into the restoration of the system (not easy without windows), but nothing works and I'm about to throw this pop up window with my laptop.

  '

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  Windows Vista Home Basic to home premium compatibility

  the recovery came with my compaq presario cq60 dx211 disks would work with windows vista home premium. the recovery disk, I was created when I had windows vista home basic.

  How is - happen you to Vista Home Premium.  No, they will reinstall Home Basic.

• I am trying to download adobe 10 but my computer says that it is blocked and dangerous to download. Can someone help me with this problem

  I am trying to download adobe 10 but my computer says that it is blocked and dangerous to download. Can someone help me with this problem

  Temporarily disable your Antivirus utility and try again.

• I try to download apps from creative cloud on my HP xw8200 workstation with windows XP PRO. A meassage comes up saying that my OS is no longer supported. Where can I download the software compatible for XP?

  I try to download apps from creative cloud on my HP xw8200 workstation with windows XP PRO. A message appears saying that my OS is no longer supported. Where can I download the software compatible for XP?

  Hello

  Creating cloud is no longer compatible with Windows XP.

  Refer to the system for creative cloud and different applications requirements:- system requirements | Cloud Creative

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• "BOOT MGR is missing" error while installing Windows.

  Original title: problem during installation of operating system

  whenever I get the CD/DVD of any Os install , it shows a message

  "BOOT MGR is missing"
  Press Ctrl + Alt + Delete to restart
  -
  -
  I rebooted a hundred times and tried a lot of different types of BONES [e.g Xp, Vista, Windows7, Windows server<2003,2008,2012>& EVEN Windows 8]
  my computer's CPU is Intel Core Duo
  RAM:--2 GB
  supports:-only 32-bit Os
  Please please help me

  whenever I get the CD/DVD of any Os install , it shows a message

  "BOOT MGR is missing"

  Press Ctrl + Alt + Delete to restart

  -

  -

  I rebooted a hundred times and tried a lot of different types of BONES [e.g Xp, Vista, Windows7, Windows server<2003,2008,2012>& EVEN Windows 8]

  my computer's CPU is Intel Core Duo

  RAM:--2 GB

  supports:-only 32-bit Os

  Please please help me

  Some information has been left (by yourself), thinking that we could just assume you were * or * you don't know may not to do.
   
  If you have entered your BIOS and changed so as to allow it to examine first of ALL your CD/DVD drive for a boot media?
   
  Using bootable media?
   
  You have verified that the media in question are readable elsewhere?
   
  You have verified the functionality of the CD/DVD drive (new does not work or configured correctly)?
   
  When he starts a Windows boot media (CD/DVD) it usually States, «press any key to start from the _...» "and if you don't, it will default to the next media (usually your hard drive) defined in the BIOS to boot from... You are out of this message or does anything about it?
   
  Have you tried to create a USB bootable (Windows 7 for example) and change your boot order to try that first?
   
  What is the brand and model of this system which apparently only accepts 32-bit operating systems (you say that it is new - so I'm curious as to why this limitation exists...)?

• CD/DVD drivers are missing and my system is not able to detect the dvd drive.

  Hi, after installing some updates my dvd/cd drive is not detected by the system and the option is not in my computer menu, so I checked in the Device Manager. and my cd/dvd drivers are completely absent and not present in the Device Manager. I m using vista Home premium, help someone
  Thank you

  Hello

  1st reboot and watch again in Device Manager:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Impossible to put the recovery disk and Boot/BCD error

  Hello

  I have several problems, I hope someone can help me.

  While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.

  1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.

  2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.

  3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.

  What are my options now?

  I can start and use Windows normally.

  Under computer management, when I right click on the drive of Reactivare recovery disk is gray.

  Thanks in advance for your help.

  Miss N

  Hello cloud

  I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

  I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)

  Thank you

  Miss N

  P.S. No lost files, it took 2 minutes to do. I am very happy.

• Compaq Presario CQ40 - 100 CTO Notebook (you want to load Windows Xp... Bluw error screen)

  I want to load windows Xp on my notebook Compaq Presario CQ40-100 CTO Notebook PC
  I already have vista on it
  When I try to install windows xp using boot able cd I get an error each time blue screen

  PLS help me... .i want to load windows xp on my laptop

  No. F2736PA #ACJ

  Serial number. CND84502BQ

  Compaq Presario CQ40-100 CTO Notebook PC

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  Your model should ICH9 sata driver sliptreamed in the installer CD of XP. If you did it right, you'll BSOD error.

  Use Nlite to sliptream ICH9 sata driver.
  A good guide for driver sata sliptream, here

  Note: do NOT use this guide sata driver, your sata driver is below ICH9.

  ICH9 sata driver,

  The pilot lies in iaAHCI.inf and is called ICH9M-E/M SATA AHCI Controller, here

  Download nLite, here

  Some suggestions to avoid problems when installing XP:

  1 try NOT all wake sata drivers, use only ICH9--> ICH9M-E/M SATA AHCI Controller

  2. use of XP - SP2, much easier to use since many XP drivers were built based on XP - SP2.

  3 burn the installer of XP slowly and do not use the maximum speed, sometimes it create errors

  4. choose a reputable support CD, not the one at little cost.