my HP printer worked wirelessly on my macpro. now it is not.

Similar Questions

• Vista will not print works wireless but wired through router

  I have 2 wireless modem ATT DSL wire connected to a firewall server / print wireless Netgear FM114P ProSafe and a router 3Com to increase the number of connections.

  I have a Vista laptop that allows to print everything wired through my 3Com router connected to th Netgear FM114P ProSafe, server print/firewall wireless connected to a HP laserjet 6 p printer, but while Vista connects to wireless internet, it won't print wireless HP connected to the print server.

  I have configured the other portable XP to print wireless using the same ip address but can't get Vista to work.

  Hello

  Your 2 wire wireless mode, is actually a Modem/Router combo.

  I hope that your Prosafe device is connected as a switch with an Access Point.

  If it is connected as a second router you have independent networks that will not work against the second router NAT doble and thustwo.

  Re-set according to the principle here, http://www.ezlan.net/router_AP.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP officejet 6500 a printer works with Mac Mountain Lion but scanner is not

  had a 10.6.8 imac and I used and scan with hp printer HP officejet 6500 a.

  Just got a mac mini 10.8.4 and the wizard migration used to move all my programs and information.

  The printer works just fine but the scanner does not work.  When I try to start the scan by pressing the printer screen it says computer no. detected as part of the message.

  If I click on the scanner icon on my dock it says

  HP Scanner 3 cannot be opened locks of Aproblem.  Check with the developer to make sure that HP Scan 3 works with this version of Mac OS X.  You may need to reinstall the application.  Don't forget to install the updates that are available for the application and OS X.  There is also a report I can click on and sent to apple.

  I got a free mini mac technical support - they helped me with the migration, and then a few days later, I called for what they help me with things that were not working as before.  All resolved but this.  They said contact that HP may be there is something that I can download to make the scanner work?  Hope I don't have to buy a new printer.

  Thanks for the tips .

  Hello

  Yes, go ahead and put this folder in the trash, I would also suggest restarting the Mac and repair disk permissions in order to avoid any possible permissions errors that can impact on the installation:

  Hello
  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you have finished my steps above to reinstall the software.

  Shlomi

• I tried to install a jet Office NEVER USED 5700 HP on my Dell Inspiron 1525. Finally managed to do print the Pages of Test 3, now it will not print anything. What I am doing wrong? ___Pat-

  I have hp HAVE TENT TO REPLACE MY HP 3500 WITH A NEVER SERVED 5700 DESKJET.  FINALLY MANAGED TO DO PRINT THE PRINTER TEST PAGES 3, NOW IT DOES NOT PRINT AT ALL.  I AM TRYING TO INSTALL THIS PRINTER ON THE DESKTOP DELL INSPIRON 1525.  A DELL TAKE CONTROL OF MY COMPUTER THE OTHER DAY HE HAS DELETED MY OLD HP UNTIL I COULD FIND THE CORRECT CD FOR HER.  ENDED UP WITH NO PRINTER AT ALL.  THIS ONE IS MORE RECENT ALL CARTRIDGES WERE STILL IN ENVELOPES AS THE PRINTER.  CAN SOMEONE HELP ME?  NOT ONLY AM I UNHAPPY WITH VISTA, BUT THIS DELL (1 YEAR OLD) IT CAME WITH.  WINDOWS 7 IS NOT FEASIBLE NOW.

  HELP PLEASE!

  Than 5700 is a serial number of the printer, NOT the printer model number.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=HP+5700+DeskJet&submit.x=10&submit.y=4

  Choose your printer, the OS and drivers model number, if any, at the link above.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-001&h_query=HP+5700+DeskJet&submit.x=4&submit.y=5

  Choose your model and the installation instructions.

  For any problem, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner

• After the installation of 8500 a909n printer works wireless for a few months and then quit?

  Wireless worked for two months after the installation of replacement printer, then he stipped works, but still compatible with USB. Technical support phone could not operate either. What should do?

  Nothing that I said. The printer was a replacement for one that would not connect at all, then the tech team India talking my client through cannecting it then a few months later it stop responding wireless but worked hard when the USB is connected. I was able to remedy through the convenience store a couple of times and selecting the difficulty of choosing the default printer for the correct choice rather than the fax machine. I chose HP officejet (network). Thank you for your time.

• 305 a HP desktop printer: J611 Wireless Desktop HP 305 a series will not connect to new router to talktalk (using Chromebook)

  A new router through Talktalk and since then my printer Wireless does not connect.  It shows on my chromebook as this has already been added as a printer of cloud, but blue light wireless flashes.  Not had any problems before this that he was that we got the new router.  Tired to connect by using the method of the button/PIN button still no joy.

  Please note using Toshiba chromebook on windows/mac.

  Please help as I am ready to scream! Laughing out loud

  Longess

  Hello @longess,

  Welcome to the HP support forums.

  I understand that you have acquired a new router and get your Deskjet 3050 has connected to your new network.

  I would like to help.

  The blue light is flashing on the printer indicates that the wireless radio is on, but the printer is not connected to a network. This is the situation. You have a new router. The printer must be on the network.

  So the next step is to get the printer on the network.

  The deskjet printers family is usually USB wireless setup.

  This causes an obstacle when you use only a Chromebook.

  Chromebook does not support the software needed to turn the printer on the network.

  If you have access to a Windows or Macbook notebook, the following link will help you place the printer on the network.

  Configure the printer to a wireless network for the HP Deskjet 3050 a and 3070 e-all-in-one printer series

  I have something you can try.

  Check out this post from Sunshyn2005.

  Re: Deskjet 3050 does not connect to my wifi network

  If this message does not help to get on the new network printer, you will need to borrow a Mac or Windows computer.

  Good luck

• Network card not working plus-nouveau that bought now PC will not boot!

  Hello

  Mounted LAN realtek network card gave up the ghost so I bought this pci-e card on ebay.

  I installed it in each of the 3 slots of alternative but the PC will not boot with it in.

  This card is not compatible, or do I have to buy something else?

  Desktop HP Pavilion HPE h8-1070uk

  12 gig Ram

  Yes, exactly.

  Here is a link to many others...

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene & DEPA = 0 & Order = BESTMATCH & N = 100006519 & isNodeId = 1 & Description = USB + RJ - 45 + Network + adapt & x = 0 & y = 0

  I would like to know well why these PCIe NIC cards cause the PC does not start.

  People install PCIe firewire cards, cards network wireless, sound cards and all work fine, but .they wired NETWORK card doesn't seem to work.  Not every PC is but several.

  A lot of confusion.

• After the use of kodak, while a USB printer to computer months several said now it is not connected. I then installed my Canon printer - computer says again - not connected.

  Kodak printer leave scanning and copying - only a few months - then tried to reinstall my Canon printer - computer writes that both printers were NOT connected even if all have been connected and printer lighthouse was lit. On top of that error code 66A is also a headache. All solutions outside of the payment of the registry helps who want a small fortune to fix the mistakes of hundreds of couple, they claim, they found.

  Hello

   
  Fix the .net Framework 4 installation
  
  Windows Vista users follow these steps to repair the installation of .NET Framework 4:
  1. close all running applications
  2. click on start, type Uninstall in the start search box and then click on uninstall a program
  3. double click MICROSOFT.NET Framework 4 Client Profile to start the .NET Framework 4 Client Profile Maintenance application
  4. Select repair .NET Framework 4 Client Profile to its original state and click Next
  5 allow the repair to complete and then click on finish
  6. click on restart now to restart your computer
  7 and then try to install the drivers of canon and check.
  You can also check this link:
  Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update
  http://support.Microsoft.com/kb/2507641

• My edges tool refine used to work correctly in the past, now it does not work, please help

  Hi I have been using photoshop for more than 6 months and in the past, that he used to have no particular problems with the edges tool to refine, but unfortunately now it don't work very well, every time I try to choose the RADIUS manually (inside the edges of refine it) it starts distort the pieces I tried manually to improve with the selection edge brush , I'm just trying to refine the selection of hair and its been a month since it doesn't normally. I've even reset all the settings in photoshop but its still the same, I used a lot of pictures, so is not just a specific image that it cannot be improved, it's the same thing with all the images, even with a tight white background.

  Please contact me as soon as possible...

  Thank you

  • Open the Photoshop preferences > Performance >
  • Select the large and flat
  • Restart Photooshop

  

  ~ Assani

• I reinstall firefox & now this isn't show "zonealarm toolbar" & "so think web video downloader for firefox". It was working fine before... now it does not show yet. Help, please

  I uninstalled firefox, keeping its data as it is then reinstalled, but it does not appear
  'zone alarm toolbar' & ' so think web video downloader for firefox button "...

  This has happened

  Each time Firefox opened

  == I reinstalled firefox

  Hello SPT.

  If you go to tools > Modules > Extensions, you can see the desired extension registered? They may be incompatible, or have been disabled for some reason any.

• OfficeJet 6000 E609n print on USB. I can't make it work wireless

  HP Officejet 6000 E609n Win 7 64 bit

  My printer works on a USB connection, but I was not able to do

  function on a network wireless router connection.

  Router is Linksys WRT160N V3.

  I used all of the solutions recommended in the instructions from HP.

  OK, since you get the error "the selected printer is not present." during installation, here are a few troubleshooting that should help you narrow down the cause and resolve the problem:

  The printer is not found during Network Installation in Windows

• I have a wireless printer and changed modems and need to know where to go and change the security key to make it work wireless

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.

  The method depends on the printer. Read the instructions or uninstall, and then reinstall the printer. It will ask you the modem settings.

• HP DJ 2540 was the fine print - now, it will not print at all.

  HP Deskjet 2540 - model #: SNPRB-1204-02 Ser #: [personal information]

  Can you help me?

  I spent three very frustrating days with my printer.  Printer worked wireless fine and usb connected until about three days ago.  I've had it for a year and it worked very well for all this time.

  Now, it does print from my laptop. My wife's cell phone can print without problem wireless in another room.

  Here's what I've done so far.  I uninstalled and reinstalled the HP software from the CD drive four different times. It installs and seems to connect properly.  Printer appears in "devices and printers".  It is not a test print.

  I installed all the updates on Windows 7 Home Premium X 64.

  I ran doctor Scan six times.

  I run scans on network for problems.

  I wipe my laptop and do a fresh install (I do each year).  But I did only 3 months.  Really don't want to do this again.

  I have nothing seems to fix.

  The printer connects to the laptop, it can be connected to a network printer. But no printing.

  It is simple ceased three days ago.  I don't remember the changes or warnings.

  I'm a little tech savvy and is not afraid to test - but I've exhausted what I can do.

  It seems to be a problem with permissions on my laptop but I can't in this case.

  I am a pastor and I use my printer almost every day.  I'm desperate for a solution!

  Joe N Tucker

  Found the answer in the forum.

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9. Select Deskjet 450 in the second.  If the 450 driver is not there, use the Deskjet 990c printer driver.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

  Work on the two connected usb or wireless printing.  You don't have to change the 450 driver.  I do not know why the pilot of 2540 worked for a year and all of a sudden 3 days ago stop working-, but he did.

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• Office Jet 6500 Wireless: print works do not showed "filter has failed."

  My Officejet 6500 wireless works very well on the scan, but will not be printed. It showed "Filter has failed" and paued on wirelss or plugged USB cable?

  Hi there @Hsiu

  Welcome to the forums

  I understand that you see a message "Filter failed" when you try to print from your Mac, with the Mavericks. I have a few steps that I would say that you follow below that should help you.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Follow this guide: install a printer Mac driver by using Apple Software Update
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  Good luck, I hope it works!