My hp2605dn does not text in color print after reinstalling on the new pc windows 7

My PC had to be replaced. The HP printer is 6 years old but still works fine, so I chose to keep and downloaded the driver that I thought was good. Now, I get a message when each print job is started and the parts highlighted and the text does not print in color. Should which driver I use to properly install the printer on my new Windows 7 PC?

You should NOT have downloaded all driver.  You should use the driver that is built into Windows 7 (you might need to make the installation of the printer go to Windows Update).

So... have what driver you installed?  The terrible "universal print driver?

What is the complete message, you get a print job to start? Please do not paraphrase.

Print a demo page (to print the demo page, press (left arrow) or the (right arrow) keys on the Control Panel printer at the same time).

Or print a Configuration page:
1. Press (left arrow) or (right arrow) to select the menu reports.
2. tap on (selection).
3. Press (left arrow) or (right arrow) to select the Config report.
4. press on (selection) to print a Configuration report page.

The test pages print in color?

Tags: Windows

Similar Questions

  • Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

    Does not update CS5 Production Premium, re-installed on the new PC (Windows 8.1). Cannot read Canon CR2 files.  I have re-installed.  What's wrong?

    Jeff, thank you.  I couldn't update any program in CS5.  It turned out that I had to do a 'update manual".  Not sure why it was different, but it worked.

  • How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

    Have you looked at the site of Canon?

  • How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

    Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

    I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.


    Thank you for your attention.

    If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

  • RT-20372 said backspace does not work for TextField, but if you open the new window it works

    Hello

    See this bug (registration required) = "TextField doesn't consume backspace and delete key events.

    I use this

    • Win 7/64-bit
    • last 7 + updates java to update
    • Kepler Eclipse + efxclipse

    I'm a developer of this application from https://github.com/Johnmalc/BankApp , I encountered the problem that shouldn't work. For me it works and I don't know why?

    The said bug that backspace does NOT work in the textfield. But in my case If I open a new window (concert at the scene) and then back in the new window works fine. This is my example of this controller class that is responsible for such behavior.

    class Controller {
    @FXML
        private TextField AccountNumberField;
    .......
    
    @FXML
        void initialize() {
    AccountNumberMethod();
    .........
    }
    @FXML
        void AccountNumberMethod() {
            AccountNumberField.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
    
                        @Override
                        public void handle(KeyEvent event) {
                            if (event.getCode() == KeyCode.ENTER) {
                                int AccountNumber = Integer.parseInt(AccountNumberField.getText());
                                ac.setAccountNumber(AccountNumber);
                            }
                        }
                    });
        }
    }
    
    
    
    
    

    And it is the class where I call class Conroller

    @FXML
         void NewAccount() {
              NewAccount.setOnAction(new EventHandler<ActionEvent>() { //NewAccount is button
    
                   @Override
                   public void handle(ActionEvent event) {
                        Parent root;
                        try {
                             root = FXMLLoader.load(getClass().getResource("/res/account.fxml"));
                             Stage stage = new Stage();
                             stage.setScene(new Scene(new Group(root)));
                             stage.show();
                        } catch (IOException e) {
                             System.out.println("error");
                        }
                        event.consume();
                   }
              });
         }

    So my question: which is on purpose or it is a bug that should be reported.

    You can also see my 3 files of the application here https://github.com/Johnmalc/BankApp/tree/master/src/application

    I have prepared a file zip-eclipse-so you can download it and help me as soon as possible.

    https://www.dropbox.com/s/5lxzdrg19c399q7/TestApp.zip

    Thank you. Ask me more if needed.

    @malcjohn

    Well, that said, in your controller, you event filters that consume all events events KEY_PRESSED on text fields. So it is little surprise that the text field does not have to receive some key events. It is not at all clear to me why you did it; These event filters treat only enter anyway, so why not simply manipulate the ACTION_EVENT on these controls. (If I understand it, the key events that generate text characters are managed by listeners for KEY_TYPED text fields, while for non-text characters key events are handled by event listeners KEY_PRESSED. Which is why you normally receive the regular keys.)

    Your event management is extremely complicated anyway. You register methods in the FXML to manage events, but the methods themselves define the event handler, instead of having just the event handling code. Then, you call these methods manually from the method initialize anyway. You seem to have yourself confused about management of the events of JavaFX. You probably want to read the tutorial that explains how to manage the events just by using the code Java and then read the section "add rows to the table" in the FXML tutorial to see how to save FXML event handlers. You currently have some weird hybrid of the two techniques, which is not what you think it does.

  • Microsoft does not send email confimation of vΘrification to the new email address

    My email address has changed today and I can't connect to Windows Live Messenger with it. I get a dialog box saying that a verification email was sent to the new address, but it does not? I had to create a new ID to open Windows Live Messenger. I will never receive this email or are my efforts in this case, just a waste of time.

    He could have in the spam (unlikely but might as well check), MS servers may be busy, or it may have been a mistake and that it has not been sent, so try getting it to be sent again.

  • I started Windows 7 Windows 10 times Acrobat Reader updated to DC.  Now Acrobat Reader DC does not work and I can't reinstall.  The installer says newer version is already installed.  How can I fix it?

    I'm stuck in limbo.  I fell sick of the poor performance and constant crash of Windows 10 and back to Windows 7.  I was warned that I may have to reinstall some software and was pleasantly surprised when nothing seemed to miss.  Then I noticed that the new Acrobat Reader DC icon was just a white icon on the desktop.

    Of course, the reader does not open when I clicked it, then I went to uninstall and reinstall.  No go.  The uninstall program complained that he was unable to find the. MSI file in the path with the big ugly GUID in there.  I really care about the features of cloud of Document in any case, if I am I would like to install Acrobat Reader XI and finish with the DC version.  Again, no go.  The Setup program stops and a message that a newer version is already installed.

    Next, I tried to reinstall the CD think that Setup is trying to fix the Bjorked version on the disc.  No go.  Once again the installation program complained that a newer version is already installed and bailed out without doing something useful.

    So, I'm pretty damn good here because I can't go forward and I can't go back.  Windows 7 uninstall tool think I installed Acrobat Reader XI and when asked to uninstall it still trying to dive into the folder Acrobat Reader DC and can not find the MSI file he seeks even if lead by the nose.

    Setup of Acrobat Reader DC think that some superhuman drive versions are installed and will not install no matter how much I beg it.

    What should I do?

    Claudio,

    I have found cleaners and tried both version 4 and version 2 as Windows uninstall although I still have version 11 on my system, but could not uninstall it.  Even after using detergents and restarting, the installation of Acrobat Reader complained that it was a newer version of the PC alreadyon and came out of the installer.

    I finally decided to remove all records of Adobe in C:\ProgramData and that did the trick.  I was able to reinstall the version 11 player, and I think I'll stay with that after the nightmare of all clouds 'features' in Windows 10.

  • Cannot use the printer after installation of the new computer

    I just installed a new computer with windows 7.  I have a HP photosmart 7960 printer.  Hung, but it will not recognize on the computer.  Said that the drivers are not installed.  HP Web site says that the drivers are installed with windows 7 and that I don't no need to install them manually.  I have 7 ultimate.  Does make a difference?  If not, then how do recognize the printer from the computer?  I installed the Device Manager, but it would not install the drivers, after I went through the wizard.  It asked me to register and pay $30.  I can't download the drivers without payin for them?  Thank you.

    All I had to do was restart my computer.  Works now.  Some jacka$ $ on Device Manager site wanted to charge me $39 and take control away from my computer.  He said it would take 2 hours to fix.  He also said that the printer was not compatible with windows 7.  Well, I printed of him this morning.

  • error code when sent for test printing after you install the new printer on windows 8

    Installed a panasonic KX-P1121E printer on windows 8. I got an error code when sending for printing of the test. And not able to print. Help, please.

    Hello

    Please provide more information for me to better understand the issue.

    1. how the printer is connected to the computer? Is it wireless or wired?

    2 do you have updated printer drivers?

    3. What is the full error message you get when you try to print?

    These steps will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Method 1: check if the printer is correctly installed.

    You can check the link for more information about how to install a printer.

    Install a printer

    http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

    Method 2: you can check the link for the troubleshooting steps.

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    You can check the link to download the drivers.

    http://Panasonic.NET/PCC/products/printer/windows_compliance/windows_8.html

    If please get back to us and let us know if this helps to resolve the issue.

  • Why CS4 is not opeining with camera raw when reinstalled in the new Mac Mini?

    Just bought a Mac Mini and installed from disc my CS4. It does not shot with the Canon 50 d raw files, but will open taken with Canon 20 d raw files. This photoshop CS4 worked very well for ALL of these files when it was installed in my old Mac Pro (2006 Vintage) tower. Why it works for a group of files and not the other? What could hurt in the relocation process?

    It seems that ACR is not updated to the new facility, try running ACR 5.7 update for CS4 can check.

    http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4680

    Kind regards

    Ashutosh

  • OfficeJet 4500 said Offin printer after I installed the new print cartridge

    Don't use Windows 7 but no window 8.   Just installed a new print cartridge and now it says the printer is offline.

    Glad to hear everything is working very well for you. If you encounter other problems, feel free to ask.

  • Firefox does not (created 9/10/13-241 MB). Downloaded new version but "cannot open only one version at a time" &amp; other version will not quit smoking. Tried several thing

    iMac 10.8.5 0s;
    Can not find the current version of Firefox. When click on icon in the Application folder, Firefox comes on top of bar (Firefox, file, editing, etc.), but by clicking on a link does not work (history/bookmarks, etc.)

    Downloaded the new version but cannot be installed since the old open version but can not delete/trash old version.

    PLEASE HELP; has tried various ways to get support/ask questions. So - so love Firefox, Safari and won't use Chrome (takes up your whole computer too!) Need to download and save a TedTalk for my gr 12 Biology class on Monday (I'm a teacher in the public school in NYC). Cannot do using Safari (?) Can't use Firefox at school (?) [email protected]

    You can get more information here:
    http://www.ehow.com/how_5110396_open-activity-monitor.html?DMSP=manual

  • Does not create a PDF printer

    Installation does not create a PDF printer

    The print driver for AA7 will not install with Win 7 and never has. AcroTray will fail also with Win7. You need to install a printer PS of distinct color, possibly from Adobe or from HP. You can rename it in Adobe PDF format and change the port to the FILE. To create a PDF file, you use this printer. Then open the PS file in Distiller to create the PDF file.

  • the Air iPad does not connect to a printer to air even if the two are on the same network

    DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

    Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

  • My system does not connect to my printer.

    He always tells me that my computer is not communicating with my printer, but whenever I check the page enable bidirectional support and click on apply when I go back in it fired. Ugh

    every time I try to print it says that my computer does not communicate with my printer. to check the box to enable two-way communication. I do that and then he shoots it whenever I click on apply why?

    Hello.

    1. What is the brand and model of the printer?

    2 is that the printer is shared on the network?

    3. What is the exact error message?

    Follow the steps and check if help.
    Method 1: Solve printer problems
    http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

    Method 2: Follow the link for the misprints

    http://support.Microsoft.com/GP/printing_problems

    Method 3: Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Add this and let know them that it applies to Windows 7.

    http://support.Microsoft.com/kb/823299

    Note: Re enable the antivirus software after testing the issue.

Maybe you are looking for

  • El Capitan download...

    Apparently, I have to wait 14 days during the loading of El Capitan. It is six concert, it shouldn't take long. < published by host >

  • How to fix partitions deleted by Windows Update

    The last round of updates has wiped four partitions by changing the table to partition under Windows 7 Professional 64 bit! After being on holiday for three weeks without a net connection, I found a multitude of necessary updates apparently when I ar

  • Running Office Professional 2007 32 or 64 bit OS

    I am currently using Office Professional 2007.  I am considering the purchase of a new computer but that you need to know if I have to buy one with 64 or 32 bits of the operating system in an effort to stay compatible with Office 2007.  I don't want

  • Suggestions from Yahoo IM

    It doesn't seem to be an official Yahoo messenger app for android, but there are several "all-in-one" apps on the market.  Anyone here have preferences/suggestions for a good?

  • How can I create and display the cuboid with a texture?

    I want to create and display and animate (rotation and Flex) a cuboid with a specific texture for any side. Can someone help me?