My hpj4680 pair

How to connect my samsung phone wifi with my j4680 printer

Hi us67,.

Thanks for the update, I appreciate it.

I've included a link to HP ePrint found on Google App store game. It shows that your Android device needs to run a minimum of Android 4.0 to use the HP ePrint app. It is the application of ePrint HP which would have enabled to print from your Android device on your printer.

Tags: HP Printers

Similar Questions

  • Can I pair a Apple Watch to my iPhone without a camera?

    Can I pair a Apple Watch to my Iphone without a camera (it does not)

    I see know reason why not if it's an iPhone 5 or later version.

    My only concern would be the cause of what ever the camera not only not for work could have an impact of components such as wifi and bluetooth which is necessary

  • Can not pair with Jabra Sport rhythm

    Hi all, I can't connect my Jabra headset with my iwatch series 2. I put the helmet on the pairing mode, I open 'bluetooth' to my watch and I can see the device listed, but when I choose them, after a few seconds, I get this message on the watch "Make sure"Jabra SPORT PACE v.1.31.0"is turned on, in range, and is ready to be paired" and then I click OK and go back to the Bluetooth screen and says device "not matched". I tried several times but it's always the same.

    The headphones work correctly. I can connect them to my iPhone and they work perfectly, so the problem must be something else. Help, please. Thank you!

    Hello

    The following steps may help:

    • The headphones for your iPhone or any other device that they can already be coupled to disable pairing.
    • Try moving the watch and headphones to another place, away from any other Bluetooth enabled device.
  • iOS10 Bluetooth is not pairing with UConnect

    I can't get my iPhone or any iPhone iOS 10 to pair via Bluetooth with my Jeep and the UConnect system.  My iPhone 6 after upgrade to iOS 10 connect to UConnect system as it always had.  I've recently updated for iPhone 7 and now I can't get my new phone to pair with the car.  I tried to connect other iPhones in the House running iOS 10 that were never originally paired with the Jeep as well and they all get the same error message "unsuccessful Pairing - Make sure"Uconnect"is turned on, in range and it ready to be paired.  The iPhone sees the Uconnect as a Bluetooth connection, but is not pair.  UConnect system running their most up-to-date version of the firmware 16.16.13.  Any suggestion would be appreciated.

    Hi there, HuskyDog94.

    I see that you are not able to match one of your iPhone on iOS 10 with your Jeep uConnect system. I like to use my hands free iPhone and I'll be happy to help you!

    Help to connect your iPhone, iPad or iPod touch with your car radio - follow troubleshooting steps under the heading "If you use Bluetooth.

    Thank you for using communities of Apple Support and take care!

  • Not HPI Bluetooth pairing

    I just iPhone7. Will pair with one of my Bluetooth devices. Already attached to, iphone 5 s no, problem. Apple support cannot help?

    Even if you just got the iPhone, make sure it is up-to-date.

    Tap Settings > general > software update

    Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

  • How do I pair iwatch already paired with beats

    How do I pair previously associate iwatch with beats.

    Hello

    To pair the Bluetooth headset with your watch to listen to the music of the synchronized playlist, check that you have set your Bluetooth headset in discovery / pairing mode (refer to the manufacturer's instructions) and you follow the instructions here:

    You will find that you must first disable pairing your headphones for your iPhone (or any other device that they can already be coupled to) until you can pair it with your watch.

    More information:

    Listen to music on your Apple Watch - Apple Support

  • Apple Watch failing to pair with the iPhone to watch OS update prompt

    We just got a new phone (iPhone OS) and try to associate our old watch to the new.  We set the watch up to the phone by following the instructions and then he said to complete pairing: we need to update the software on the watch. Then iPhone checks and said that software is up to date and there is no other options at the point and the mating of the watch does not end. I reinstalled hard phone and watch.

    any ideas?

    Hello

    If you don't have yet does, first update your iPhone OS to the latest version of the software and then try again matching:

    Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  • 4th gen Apple TV cannot pair with iphone remote app

    Click on 'Add Apple TV' selected on TV, then was invited to enter the 4 numbers matching password shown on television. However the TV shows 4 blocks of gray rectangle instead of 4 digits.

    I also checked that the apple TV and iphone are on the last OS update. What gives? This app is supposed to work with 4th gen now.

    Yes, it works. This looks like some weird glitch. Using the new application ATV 4 remote control (black), or the older version, now called iTunes remotely? Try restarting the ATV using the settings > system > restart. Then try to pair it again.

  • Anker TC930 keyboard has worked with 9.3.5, will pair with any iOS10

    My keyboard Bluetooth TC930 Anker worked flawlessly with iOS 9.3.5. Of course, once I have upgraded to iOS 10, the keyboard will pair is no longer. Just keep the wheel turn and finally, I get the message "unable to connect". I tried the step to reset the settings, but it didn't work; always will pair. My wife Air with Logitech Keyboard IPad works great with iOS10.

    Any ideas, short of a trip to the Genius Bar?

    Thank you.

    Doug

    Hello. If it appears in the list of Bluetooth devices, have you tried to forget the device? Then, fix it with the button of twinning on the keyboard.

  • Can I pair the 1st gen shows with a 6s performer 9.3.3

    I have just inherited a 1st gen watch but am unable to cross the first hurdle in trying to pair it with my 6 s (OS 9.3.3).

    I get the message that I should update my watch, but when I press on update now it checks updates, says my software of the watch is up-to-date with watch OS 1.0.1

    When I try to manually associate my phone asks a code 6 digit displayed (that I finally got to the fifth or sixth test) but then continues to ask me to update the software > check the update > says the watch OS is up to date etc.

    Is this all just not feasible or did I miss something?

    You must restore the watch to remove completely from the previous owner. And to do that you will probably need the owner previous Apple ID and password or make him open the watch.

    It requires the Apple ID and password from the previous owner. If you don't have it and can't get it, then the device is useless to you. Return it for a refund, if you can, or take it to an Apple store for an Exchange, I hope they will help you.

    Find my iPhone Activation Lock

    How to check for Activation lock before buying a second hand iPhone.

  • How do I pair iwatch with two phones? I have updated to 3.0

    How do I pair iwatch with two phones? I have updated to 3.0

    Hello

    More than one Apple Watch can be coupled to a single iPhone, but a single Apple Watch cannot be combined with more than an iPhone at some point.

  • Pairing Bluetooth headset with Apple Watch 2 series?

    Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

    Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

    My watch IS pair with my amazon echo - so I know the bluetooth works.

    The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

    Another person had problems of this kind and has managed to find a solution?

    Hello

    Make sure that you follow the instructions for pairing here:

    Use the Bluetooth with your Apple Watch - Apple Support Accessories

    It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

    It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

  • How do I pair my watch with my new phone?

    6 more that my watch was involved initially was stolen.  How do I pair my watch with the new phone?

    Hello jayfromhanover!

    You should be able to match your Apple Watch to your new iPhone without the former. I would try to pair it with the new iPhone, but if this does not work, you may have to clear your Apple Watch to the factory setting and set up again. If you do it should power be coupled with your new iPhone. It could also help https://support.apple.com/en-us/HT205189 I hope you enjoy your new iPhone 6 Plus! Good day

  • Unable to pair re Apple Watch 1st gen

    Hi guys,.

    I have a first gen 38 mm Apple Watch alu and 6s with 9.3.1 iPhone. Until now they work very well together, but Sunday I reset the watch and since then one can not re pairit with the phone.

    Once I chose the language on the watch, it gives me the pair with phone dialog box, I start the app on phone, scanner watch, everything is ok, but after that, it gives me the check window of the software, where it says "watch OS 1.0, your software is up-to-date. And that's all. I can't go on, keep it right on this window.

    I tried to restart both the watch and the iPhone, reset countless times the watch, I even tried with another phone, same result.

    Any ideas guys?

    THX

    You must update to WOS 3? then update your IOS 10 phone. And repair devices

  • Need to pair iPhone to computer for Apple pay?

    I'm happy to use ApplePay through Safari with Sierra and iOS 10.  However, I don't know how this will work without pairing my phone to my computer first, assuming that a bluetooth connection is necessary.  I cannot not and have never been able to associate the two.  Thus, any clarification would be welcome.

    Hi abdellah,.

    I am pleased to see that you are very happy to be able to use ApplePay in macOS Sierra. I can understand wanting to make sure that everything is configured correctly. I'll be happy to help you with this.

    You need not match between the iPhone and Mac. You must, however, make sure that Bluetooth is enabled on both devices and signed in iCloud. Below you will find articles that have additional information on this subject.

    Set up Apple pay on your iPhone, iPad, Apple Watch or Mac

    With the help of Apple pay in stores and in the applications and Web sites

    Pay on websites in Safari

    With your iPhone, iPad and Mac, you can use Apple pay pay Web sites in Safari.

    With your iPhone or iPad

    1. Tap buy it with Apple pay or button Apple.
    2. Check your billing, shipping and contact information for you ensure that they are correct. If you wish to pay with a different card, press on > next to your card.
    3. If you wish, enter your billing, shipping and contact information. Apple pay will store this information so you will not need to enter it again.
    4. When you're ready, make your purchase and place your finger on a contact ID. After your payment successfully sent information, you will see Done and a check mark on the screen.

    With your Mac

    1. Make sure that you are connected to the same account iCloud on your iPhone, iPad, Mac or Apple Watch. Additionally, make sure that Bluetooth is enabled on your Mac.
    2. Tap buy it with Apple pay or button Apple.
    3. Check your billing, shipping and contact information for you ensure that they are correct. To pay with a different card instead of your card by default, click on next to your default map and select the map you want to use. You can choose to credit and cards of any iPhone or Apple Watch, which is close to flow and signed on the same account iCloud.
    4. If you wish, enter your billing, shipping and contact information. Apple pay will store this information on your iPhone, then you will not need to enter it again.
    5. When you're ready, make your purchase. On your iPhone, place your finger on the ID key or double click on the side button on your Apple Watch. After your payment successfully sent information, you will see Done and a check mark on the screen.

    Thanks for stopping by Apple Support communities. Have a great weekend.

Maybe you are looking for

  • Add a PCI sound card to the 8700SE XPS?

    I joined this forum to ask this question. I've been recording and intend to buy a Dell XPS 8700 Special Edition (32GB, w/4th gen i7) for a while. It would be used for general things, and although I am not a gamer and don't need incredible graphics (j

  • NVme on alienware Aroura r4 @ bios a11

    Is it possible to use a m2 pro Samsung 950 with a m2 to pcie adapter to install windows and boot top? I just wanted to know before buying.

  • How to remove the bug called Nation Zoom?

    Nation - original title zoom Picked up a bug called Nation Zoom that attached the two browsers and not of the methods listed were able to eradicate it. Don't want to format drive unless absolutely necessary.  Any help please? Thank you Tom

  • Brother printer HL2140

    I have a Brother HL-2140 printer that shows an error after paper has got the deposit to halfway to the printer > how can I fix this error?

  • Laser Jet Pro CM1415 model cold color MFP

    I have a HP Laser Jet Pro CM1415 model cold color MFP model # CE862A. He jumped because of a power surge and the local hydro company is taken full responsibility and is willing to replace my camera. I can't find a comparable unit to give them as he d