My Iconia One 7 is a camera problem. Cannot concentrate well enough to read QR codes, etc.

My Iconia One 7 is a great tablet, but the camera seems a weak point; the color is OK, but I can't focus well enough to use QR code readers. Y at - it a solution?

B1 - 730 fixed the camera, you can not go so close code focus a QR.

Tags: Acer Tablets

Similar Questions

  • Missing camera problem - cannot export (share options greyed out)

    I'm under El Capitan 10.11.3

    10.2.3 FCPX

    I7 MacBook retina (2012)

    8 GB RAM

    I worked on my calendar, creating several minutes of content.  In the background as well as media files import and transcoding, I noticed that all my stock options were grayed out.  I learned that I stumbled upon import of problems due to the lack of space on my external hard drive as they are for most of the 4K files.  I understand that when you work with 4K you can work, but you must wait until all transcoding of files before exporting a show.

    I also made the mistake to rename some of the clips in the bin case after being placed on the timeline (I think this might be part of my problem).

    This combination of import to a drive with enough space to allow the final transcoding with name change has created a lot of clips of CAMERA MISSING - so NO the ability to share.

    I bought a larger capacity drive and copied all the files in the new storage of 2 TB.

    One - I do an import/reimportation of camera/player.  (in some cases if it does not work - I am again an import - then try to link)

    I am finally able to exit then restart and see FCPX that my changes TAKE so I think I'm on the right track.  Sharing options are grayed out still, but I think that once all are properly reassociated on the timeline, I should be ok - right?

    Here are my questions:

    Why not see problems with my events (no yellow warning sign) everything seems fine - I can change but can not export?  Sharing options are still grayed out?

    Then if I stop/restart FCPX - all yellow and Red warnings lack of cameras back.  I thought I solved the problem, but sometimes getting rid of missing camera is a big chore.  I'm on the right track?

    Thank you very much for your help!

    It is important to allow the import of the whole process independently of the clips - not only 4 K resolution. And part of this process is transcoding if you choose optimize. So I think you're on the right track - you have files with incomplete optimized versions. Suggest that you select your clips in the browser, right-click > transcode media and create optimized media. Open the window of background tasks and monitor if transcoding is started and if it ends.

    Post back and let us know whether or not exporters continues to be a problem.

    Russ

  • How to read bar codes using qith and the mink of Gige camera software

    Hello

    I have a Gige vision camera, I need to use it to read bar code and save it in a file. Is there a way to read a code bar directly from the camera with LabVIEW to mink. Please let me know if there is a way.

    Thank you

    Ankit G

    Hello AnkitG,

    If you open the finder example in Labview, there are examples of code bars.  They are under the Modules and Toolkits > Vision > Applications.  You should find two examples of how read bar codes.

    David,.

  • All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

    All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

    What should I do?

    Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

    According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

  • Hi cyberlink you cam problem...

    Hi team,

    could you please find my cyberlink you cam problem...

    Use HP Pav.N/B i5-2450 G6 1323 pure product... Windows 7 (64-bit)

    every time go to opening cyberlink cam show you like it under this same question do face from the last 6 months can you please show me the solution...

    cannot use SKYP also myself...

    Can you please find me solution ASAP...

    Hi Asra,

    Sorry, still no magic solution for this - instructions to 'fix' Windows 7 are not so different from those proposed in your first application.

    Possible software patches for webcam in Windows 7 are explained in this document:

    Webcam troubleshooting (Windows 7)

    If you have tried the Hard Reset, if you tried to reinstall your driver, if you tried to check the BIOS... then the webcam can be broken.

    Webcam of tiny and delicate wires break, crush or break away from the camera.  It is not so expensive to fix, but you cannot fix a broken webcam with software.  You will need to send (or take) the computer to have the webcam repair.  It's sad - it happens.

    One of my notebooks had a broken webcam and the laptop was new, too.  HP fixed the son, returned the laptop and everything was good after that.  So, is it broken wires for you?  Unknown;  There are a few software patches to pass and then you might consider, in fact, the webcam is broken.

    You can always take the laptop to a local repair shop and get a notice.  This isn't a real difficulty expensive even if it is the offending material.

    Good luck.

  • iPhone camera problems 7 iOS 10.02

    iPhone 7 128 g, - camera problems. My phone was working fine until I updated to iOS 10.2... now I can't get my camera

    work on snapchat or my regular camera, it's just a black screen. If she decides to work it freezes. I tried to force reboot, power on & off, check the updates and nothing has worked. Anyone else having these issues and have any successful resolution?

    Same thing here! Any suggestions?

  • FireWire 1394 camera problem

    Community salvation OR,.

    I want to use my guppy (FireWire 1394 connection) of Allied vision camera, but I came across a connection problem. I use this card FireWire (http://www.belkin.com/IWCatProductPage.process?Product_Id=428618), but according to the installation, check, this card is properly installed.

    When I plugged the camera Vision Builder AI 2010 and it wouldn't recognize my camera so I went for the problem that I found at my material properties. When I go to the properties of the camera, he said: "this device does not start. (Code 10).

    I've been looking for a solution, but I'm not a genius when it comes to this. So is there maybe someone who can help me with this problem.

    Concerning

    Ruts

    Here's an update after a whole day looking for a solution.

    I currently see the my card PCI IEEE 1394 (old map 2001) who has a complaint OHCI driver (I guess that's the default windows driver). I also see the camera under my hardware, but it shows with a small sign of error that says "device will not start (Code 10)". I also installed the driver NOR can I see in my MAX of NOR, but non-material to my PCI IEEE 1394 card.

    I also discovered that when I had a unibrain driver installed (in collaboration with the complaint OHCI driver) my camera simply don't appear in my hardware.

    That maybe I need to connect the driver OR with my IEEE 1394 card (I tried to do, but I could not)?

    In the attachments you will find a photo that shows my material.

    EDIT:

    Don't bother the problem is resolved. I think she had need of some time after uninstalling the driver unibrain to see the cam OR max. For those who have the same problem: just install the default windows driver (OHCI complaint) and install the NOR-IMAQ for IEEE 1394 driver (think my problem was the additional Unibrain driver).

    Concerning

    Ruts

  • Iconia one 7 b1 740 8 GB can update kitkat 4.4?

    Iconia one 7 b1 740 8 GB can update kitkat 4.4? and why I can't see the site of 740 on acer iconia one 7 b1?

    They may not have released it again for your model.

  • How can I disable the startup mode fast for my Iconia One B1-770-K651 7 inch 16 GB Tablet

    Hi, I recently bought the Iconia One B1-770-K651 7 inch Tablet 16 GB and when I turn it on and put it back in the box for some reason any continues to go in quick start mode. I want to know how can I disable quick start permanently mode I can't find something in the settings to turn off the quick start mode.  the version I have is android 5.0 lollipop. Is it possible to disable it in settings. Thank you

    Honestly, I would contact the seller or the Acer support service for warranty check.

  • How can I remove my Iconia One 7 plant apps? Thanks, I'm really new to this!

    Hello, everyone! I'm in my first forum with my first question. I have a phone smart semi that still has me totally confused, so naturally I go and buy a tablet. The Iconia One 7 looks really cool, and I managed to set the date and time. If I can't understand how to use it properly, at least I'll have a nice clock. Thanks in advance for your help, and I will try not to ask too many stupid questions - Ms. Newbie

    The initial factory applications are not removable but you can remove any application you install yourself. Some versions of Android don't let not disable some of the apps factory, however, they are not actually deleted.

  • Iconia one 7 geschenk bekommen

    Hallo kann mir helfen, ein Iconia one 7 gechenkt bekommen habe someone vieleicht. beim q asked er mich nur nach 2 Fremdsprachen Englisch oder Spanish. Aber ich möchte Deutsch, mach ich das um wie're zu change? I think auch nicht das're gibt nur 2 languages. ES wurde in Portugal so.

    Moin eddieemma,

    hyva mehr auf dem compressed breast languages. The bei der nicht scrollen Sprachauswahl kannst? supervisors, dadrunter oder next? Sonst kannst, wenn äthiopische sprechende Menschen in der nahe, are erstmal einrichten Yes.

    DAS r. erstmal uberspringen, bis are so normal. Es gibt Dann in den Einstellungen den Punkt languages. VIELLEICHT kannst the dann sleeps deutsch Park.

    Viele Grüße

    Charon13

  • Web cam problem, using Skype... I can see other people, but they cannot see me...

    original title: web cam problem

    using Skype... I can see other people, but they cannot see me...

    Hello

    Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
    There is also information and on the Skype Forums.

    Skype - Support
    https://support.Skype.com/en-us/

    Skype - Forums
    http://Forum.Skype.com/

    Also check with the manufacturer of the system, their drivers and documentation support online and ask
    their forums (if any).

    ============

    You will probably need to reload the drivers of the device and any camera control software.

    Login as an administrator.

    Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
    on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
    is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
    will update the driver stack.

    Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
    software (if not more recent get the same).

    Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Then let windows updates on however prevent loading of drivers who are often older than the
    those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
    really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Camera problems of Smartphones from blackBerry after 8100 Firmware update to v4.5

    Hi all

    It is a known issue for me that I'm updating all the handsets of our work with the Blackberry firmware for the company that I work.

    After updating the firmware on multiple handsets to the latest version of the Blackberry 8100 4.5, there is a problem with the camera.

    When you are in display mode and the outside (even if covered) the screen turns white as if the lens opening is open wide.

    Even when you take the picture, the result is white all over.

    Please see examples here:

    http://www.imagedump.com/index.cgi?pick=get&TP=540100

    and

    http://www.imagedump.com/index.cgi?pick=get&TP=540101

    Two of these photos were taken inside with just on fluorescent lights.

    However if I return to the firmware to a lower level the problem no longer exists.

    I tried to change the settings for the White Balance on the handset and no matter what setting I put it on the same results occure.

    I was wondering if there is a patch or I have to wait the next release for a bug fix?

    Thank you for your help in advance.

    Gadget

    Updated the 4.5.0.55 combined software and the camera problem no longer exists.

    Can I get some laurels to solve the problem myself? Laughing out loud

    Gadget

  • Hello, I bought Adobe Creative Suite. I joined by monthly payment (€60,49 / month) with a one year subscription. The problem is that my screen says «your order is processing...» ». I bought it yesterday morning and today I am still waiting to

    Hello, I bought Adobe Creative Suite. I joined by monthly payment (€60,49 / month) with a one year subscription. The problem is that my screen says «your order is processing...» ». I bought it yesterday morning and today I am still waiting to complete my installation. I need to work earlier. How can I proceed? Thank you.

    You can use the subscription on a trial basis pending before buying to clear the system.

    If it is not resolved then contact Adobe support directly.

    To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • Tracker camera taped permanently 'camera problems' indicates how much time left

    Tracker camera taped permanently 'camera problems' indicates how much time left

    It is for a 30 second clip shot with a DSLR hand, a little shake and some pan and works

    any ideas?

    Yes, the shots just won't solve. Try to prune the shot is shorter. 30 seconds is an eternity. I just cut a: 30 second TV spot which has 12 changes in action. The average length in a film shots went from 12 seconds in the 1930s to about 3 seconds today. A century of cinema data reveals how movies have changed

    The normal way to work on a camera track turned is to rough, cut to about the finite length of shooting more a few frames as the handles, and then make the camera tracking and insert your effects. If you really must track camera suddenly more than a few seconds, you will need to carefully plan and fire the shot, so the camera can be re-created. More so the more likely is that the software cannot be resolved for the camera. The more things that are moving down the less likely, is that you will get a good solution. For example, if you walk with a camera on a sidewalk in New York spent thirty seconds you probably will be able to solve for the camera, unless hide you all mobile people, then compose the shot until you try to solve it.

    A digital SLR that moves autour a little will also have rolling shutter problems and who gum up the shot. Blur fast movements also clogged the solution. There is no camera Tracker that can solve every time. Tracker of AE camera does a pretty good job with images carefully shot that has a lot of geometry sets in the scene when the lens used has very low distortion of the objective. Without seeing your shot, it's the best I can find. The chance whether the shot instead of a bug is very high.

Maybe you are looking for