My iMac does not 'see' an external device into USB port?
My iMac doesn't "see" my Galaxy S6 when I plug it into a USB port. The same thing happens when I plug my headset intercom of exploitation to a USB port. Nothing appears in the list of devices. I can see my external hard drive listed under devices. I tried different cables and all the USB ports. Both devices to load when it is connected, but they do not appear when I open the Finder. Any ideas on how I can get the Mac to recognize these external devices?
OS X El Capitan 10.11.3 version
Devices section of the Finder will be only peripheral with accessible storage. Open an application that interacts with the others.
(141396)
Tags: Mac OS & System Software
Similar Questions
-
Disk utility does not see an external drive on my network
I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.
Disk utility is not supposed to see the network drives.
If it's a USB, connect it to your computer.
If it's an Ethernet or wireless, using a utility specifically designed for this.
(145027)
-
Backup Restore Time Machine does not see RAID external drive
Hi all
I have a problem with my iMac restore from a Time Machine backup, and I was wondering if anyone else had the same problem already.
I had to reinstall OS X El Capitan from scratch, based on education, I received Support from Apple. That worked without problems and my iMac works fine. However, I wanted to restore it to how it was before, using Time Machine. I keep my backups on a LaCie 5big Thunderbolt 2 and never had any problems with it.
To restore the system, I followed the instructions on the Support page. I restarted my system in recovery mode and selected the "restore from Time Machine backup". Unfortunately the LaCie 5big does not appear on the list of drives, so I'm stuck... When you use the system in normal mode, the external RAID is visible and Time Machine stores backups on it without any problem.
Any of you are familiar with this problem? I would be very grateful if you could help me with this problem!
Kind regards
Valerio
Hello
-While the system is booted in recovery mode, confirm that the Lacie 5big network is visible in disk utility. You will need to disconnect / reconnect the Thunderbolt cable to the Lacie 5big be detected.
-Once seen, a new attempt to restore from Time Machine backup.
See you soon
-
iMac does not recognize the external speakers
After working flawlessly for two years, my iMac (running Mavericks) now does not recognize my speakers B & W MM1. I restarted my iMac, unplugged and reconnected my speakers as well from the electrical outlet and the USB connection, but nothing has worked so far. All other connections are solid. Any suggestions? Thank you.
Hmmm. These speakers are USB, so they should be relatively problem-free.
Try to disconnect all your USB devices, restart, and then reconnect the USB devices again. It remaps the USB.
In addition, make sure the configuration under the system preferences/Sound/output is correct.
-
Win 7 64 does not see disks external usb 3.0 at startup
I have a 3 TB usb 3.0 drive external which is plugged into a usb port 3 on my Windows 7 Asus computer. At startup, the computer see this player. If I inplug the power from the USB and plug it in again, the computer sees the drive and all is well.
If I plug this drive into a usb 2.0 location, the computer sees it at startup. I would like to be able to use the speed of the usb 3.0 slot, however.
I installed a new driver on the seagate site (all on the phone with technical support of seagate). This did not help. The man said he thought that the problem was probably in the settings of the bios of the computer.
In Device Manager, I've uninstalled the USB mass storage device element which had a '! ' and then right click and choose scan for hardware changes. Scan the computer, and then try to install the drivers, then the error message that says that the driver installation failed, without explaining why.
Help, please
I thank each of you for your attempts to answer this question!
YES, microsoft 'fixed' the problem that was part of the addition of service pack 1 for win 7.
It seems that the transition "done something" to how usb 3.0 drivers worked. Or in my case, didn't work. After you apply the fix, everything seems TSE be as it should have in the first place.You can close this one!
-
VMFS does not see the measuring devices?
I ran into a problem with my ESX 4 deployment. Recently, I expanded the size of a LUN in my SAN so that I could extend the data store associated with this volume. The data store recognizes the new 300 GB size (image vmfs_prop), however, I'm not presented with options for a measuring device when I try to 'increase the ability to data store' (image vmfs_increase). I've also updated the filter of vmfs in options advanced thinking that LUN was already associated with the data store and may have been filtered (image vmfs_filter). Any advice?
What I meant with "connect directly to the host ESX (i)" has been to connect by using the vSphere Client. Generally, you don't need to use the command line. Have you tried that before the more command line data store? It does not work?
André
-
Windows Live OneCare restore tool does not recognize my external hard drive USB
Vista recognizes the external hard drive where I have a stored Live OneCare Backup folder, but OneCare restore tool doesn't like a local disk.
When I turn on network sharing for the external hard drive, I can get him in the OneCare dialog box, but it still does not recognize a backup folder.
What kind of folder don't restore OneCare search, one called Windows OneCare Backup or any of the subfolders?
http://social.Microsoft.com/forums/en-us/category/windowsliveonecare/
Above is the care Forums a Live.
http://social.Microsoft.com/forums/en-us/onecarebackupandrestore/threads
Windows Live OneCare Backup and restore
They will help you in the Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
MO does not see my HD Mactor. But before...
Hello
I have 1 TB HD Mactor. And I used it as TimeMachine for a long time. But after the last software update, MacBook started does not see the external hard drive. And he said: "the disk you inserted is not readable by this computer. What can I do? I don't want to lose the datas in HD using disk utility.
Please help me.
Kind regards
......
All hard disks have finishes by fail. Which may occur to your 1 TB HDD Mactor.
Save your MBP on another HARD disk.
Then look for hardware problems. Using different USB ports. Try different USB cables. Remove the HARD drive and install in another known functional pregnant. Test it on another Mac.
If no success, then test it using disk utility > first aid.
Ciao.
-
iMac does not recognize the hard drive device
iMac does not recognize my new WD My Passport for Mac external hard drive.
I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports. Memory is 4 GB 1067 MHz DDR3.
I made sure that my Finder preference displays drives and external drives. I tried to see if would recognize a DVD and it does.
I was hoping to save my data to be transferred to a new Mac.
Any help will be appreciated
Hello amfisher,
Thank you for using communities Support from Apple!
If I understand correctly, you are unable to see your new external drive to an iMac 2009. I'll be happy to try to help with this.
So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).
Format an external hard drive for use with a Mac
- Connect the hard drive to a USB port on your Mac.
- Open disk utility.
- On the left side of the disk utility window, select your external drive (or one of its partitions).
- Click the delete or delete button on the toolbar.
- On the Format menu, choose Mac OS extended (journaled).
- Type a name for your drive, and then click clear.
- After that the drive is deleted, close the disk utility window.
This should allow you to copy files to the disc.
Your computer has software called Time Machine. It is a fantastic software for backing up your computer. Information on how to use Time Machine is available here:
Use Time Machine to back up or restore your Mac.
Using Time Machine is usually the best way to move all your files from one Mac to another Mac.
Have a great day!
-
I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.
Check that the drive appears in Device Manager.
If so, go to disk management and assign a drive letter.
-
Why my audio midi Setup does not recognize my external midi devices?
Why my audio midi Setup does not recognize my external midi devices? The midi interface and all midi devices are connected.
P.S. The icons and the midi interface are all "grayed out" in the midi studio window when I click or double click on it nothing happens.
-
Satellite A30 does not see other devices in the wireless network
I recently bought a Toshiba Wireless LAN Mini PCI Card, I installed and was able to recognize my broadband, but he does not see the other network devices. I have not provided with drivers or software for the operation of the card (I bought a decent retailer). Can you recommend me to downloads that would be this card?
I have a laptop of Satelite A30 1 GB ram 60 GB HDD.
Large files sometimes also stop transfer (crashes) when you use my USB connection. The usb controller uses the driver microsoft 5.1.2600.0 dated June 1, 2002.
Is this a driver problem?
Hello
If the wireless network adapter is properly installed if you have not configured you.
I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the WiFi network so all the computers must be in the same domain or workgroup.I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.
Hello
If the wireless network adapter is properly installed if you have not configured you.
I put t know which devices in broadband services, you want to say but generally if you want to communicate or transfer files between laptops through the computer WiFi network so all must be in the same domain or workgroup.I can't give you a correct answer, but only a suggestion. I have red that sometimes a lower potency could be responsible for this show. Try turning off the safe power option in the properties of the hub USB root in Device Manager.
-
I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you
Can she be seen by disk utility (and which version of Mac OS X is)
-
Use the PC migration assistant does not see the imac
My sony vaio does not see that the imac even thogh the imac can see the sony
Hi Andrewmenzies1954,
You can see the below mentioned Knowledge Base article and check.
How to use the Migration Assistant to transfer files from another Mac
http://support.Apple.com/kb/HT4413
In addition, you can also contact the Apple Support or post your issue in the Apple Discussion forums.
-
I do not see my external hard drive in my computer but I can't in my devices and printers. I too see the drive in disk management. There is a lot of data on my hard drive that I need to save. It says that I have to initialize so the computer sees the drive but it clears my data. How to recover data? The drive works and makes no noise. Help, please. I uninstalled the RPG player
and reinstalled. I've also updated the driver and I still don't see the drive in my computer.
Hello
Welcome to the Microsoft community.
I understand that you have a problem with finding printers and external hard drives in the computer. We apologize for the unhandiness caused to you and appreciate your efforts in trying to solve the problem.
To help you better I would like to know the details.
- What is the brand and model of the computer?
- You did changes to the computer before the show?
- Have you tried to connect the same external hard drive on another computer?
I ask you to run the hardware and devices Troubleshooter and check if the problem persists. It is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
I ask you to install optional Windows, including updates updates and check if you are facing the issue.
Keep us updated on the issue to help you better.
Maybe you are looking for
-
Comcast has made changes to their e-mail for several months. The e-mail function has been affected, but the problems are different for different browsers. I've had problems since August. In any case, this morning, I was unable to even log on messagin
-
Upgrade CPU on Satellite P100-434
Satellite P100-434 BIOS v 4.80 does support the Core2Duo T7500 Intel proccessor? I'm currently have T5500 and want to update to T7500, is the same thing but I don't know the motherboard/BIOS card can support this CPU? I advance thank you
-
I have 20 macs in a University laboratory image in the same way, with a user model that I created. Worked fine for several months. Lately, the chances that my user model does not load correctly is 50-50. This takes the form of: the loading dock is
-
Terminate my subscription of Apple's music
I want to stop my subscription of Apple's music. How do I finish that?
-
What is the difference between software adapter Netgear A6210_v1_0_0_34.exe AND Netgear A6210_v1_0_0_34 - SA.exe Wifi? The two together for the card Wifi of Netgear A6210 downloaded versions. I'm not one to use to install my adapter.