My iMac does not send a signal to my printer

Similar Questions

• My office does not send signal to monitor

  HP Pavilion a6200t and Desktop HP vp17 monitor

  My office does not send signal to monitor. I use the monitor to another computer it works fine.

  Problem 3 months ago.
  I clean the inside of the desktop with the compressed air bottle.

  Very important, I clean the contacts of the RAM with a cloth of cotton soaked in 95% alcohol.

• iMac does not recognize the hard drive device

  iMac does not recognize my new WD My Passport for Mac external hard drive.

  I have a late 2009 21. 5-inch iMac with Mac OS X Lion 10.7.5 version and I have USB 2.0 ports.  Memory is 4 GB 1067 MHz DDR3.

  I made sure that my Finder preference displays drives and external drives.  I tried to see if would recognize a DVD and it does.

  I was hoping to save my data to be transferred to a new Mac.

  Any help will be appreciated

  Hello amfisher,

  Thank you for using communities Support from Apple!

  If I understand correctly, you are unable to see your new external drive to an iMac 2009.  I'll be happy to try to help with this.

  So that your iMac to see it, it may be necessary to reformat the drive. The best format for use with your Mac's OS X Extended (journaled).

  Format an external hard drive for use with a Mac

  1. Connect the hard drive to a USB port on your Mac.
  2. Open disk utility.
  3. On the left side of the disk utility window, select your external drive (or one of its partitions).
  4. Click the delete or delete button on the toolbar.
  5. On the Format menu, choose Mac OS extended (journaled).
  6. Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.

  This should allow you to copy files to the disc.

  Your computer has software called Time Machine.  It is a fantastic software for backing up your computer.  Information on how to use Time Machine is available here:

  Use Time Machine to back up or restore your Mac.

  Using Time Machine is usually the best way to move all your files from one Mac to another Mac.

  Have a great day!

• iMac does not start after 10.11.6

  Since the 10.11.6 patch my IMac does not start with my hub plugged.

  Everyone

  I assume you mean a USB hub? What does do when it's plugged in? It starts successfully when the hub is not plugged? If so, I would say that something is wrong with the hub or there is a problem with the port it is plugged or something plugged into the hub.

  Try to plug it into a different USB port on your Mac.

• My iMac does not read DVD

  Hello

  My iMac does not read DVD. Every time when I put in DVD (free or with content), it runs for a while and that he died. CD works for most very well, but sometimes they go inside and the drive is not recognized. And also sometimes the DVD drive is not recognized in ¨informations on system"in the Apple menu.

  Thank you

  Matouš PIkous

  Did you use a cleaning CD in the optical drive?

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Why my iMac does not recognize my scanner 1600 epson perfection since the upgrade to ElCapitan 10.11.4?

  Why my iMac does not recognize my scanner Epson Perfection 1600 since the upgrade to ElCapitan 10.11.4?

  First try this: reset the printing on your Mac - Apple Support System

  If this fails, you can try this driver: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14577 & infoType = Down load

  

• Two iMacs does not start after the 10.11.4 update.

  Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

  More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• HDMI is not send the signal on external monitor once the laptop awakens from his sleep

  I have my TV as a second monitor for my laptop. I connected via HDMI. Once I leave my laptop a little past in mode 'sleep' and the screen loses the connection. Once I wake up the laptop, the monitor is not turning back on my desktop. It remains off. I disconnect and reconnect the HDMI and it does nothing. During this operation, my laptop screen flickers as when he connects to it, but nothing happens. My TV does not receive the signal, but the laptop says it's connected. What can I do to fix this? Thank you

  PS. I have to restart my laptop each time to allow to work my external monitor.

  Right-click anywhere in your option chart click homepage > output > and choose computer laptop + moniter

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• My new iMac does not support Photoshop because it's a power pc application.  How can I install it?

  My new iMac does not support Photoshop like it iis telling me that it is a pc power application, which is no longer supported...

  How can I install it?

  Or is does this mean I have to splash out on a new copy... and all costs that this implies.

  You can not bypass what Apple does not provide. If your version of Photoshop is too old (CS3 and bvefore) and uses PPC code, then it is simply never will install on a contemporary Mac since long Apple buried the Rosetta emulation and there is no compatible version.

  Mylenium

• Windows xp does not recognize the hp c6180 photosmart printer

  My windows xp does not recognize my hp c6180 photosmart printer

  Hello

  1. were you able to use the same printer without any problems before?
  2. don't you make changes on the computer before this problem?
  3. you receive an error message?

  See the following articles that may help you resolve this problem.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

• Assistant printing photographs on Vista does not give me the option to print contact sheets

  The picture on my Vista Print Wizard does not give me the ability to print contact, like my old XP version sheets where. Any way to change/upgrade/downgrade or else return this option? I really need to be able to print photos contact sheets. Thank you!

  The Print Wizard offers other models?
  4 x 6, 5 x 7, 8 x 10?

  Is it possible that the default paper size in your printer
  preferences has been replaced by a smaller size... 4 x 6
  for example? If this is the case... it will remove the largest
  models from the Print Wizard.

  To find the missing models... go to control panel
  and access your printer preferences to change
  the default size of the paper letter (8 x 10). Look carefully,
  There may be more than one Panel that displays by default
  paper size.

  Just for General info, the following items may be useful
  at a glance:

  Windows Vista - Photo Print has
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-picture

  Windows Vista - picture printing: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/picture-printing-frequently-asked-questions

• XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  XPS 730 x company vista plug-and-play does not recognize the dell aio 962 printer

  It is usually best to install the drivers before connecting the printer. Use the printer installation disk, if you have one, or follow the procedure here:

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&l=en&s=Gen&DN=TT1092882