My imac (El Capitan 10.11.6 - 2 Terabyts) complete and FCPX disk will not work. I moved a few fcpxbundles library to an external hard drive (seagate 2 trabyte) and erased from the iMac. NowFCPX said that missing data as effects therefore can not shar

Similar Questions

• I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function. I have a photo library on an external hard drive. I slowly imported previews of the photos selected from the library in

  I use a PC and I used LR3. I'm a newcomer to LR, so patient with me! My problem is related to the import function.

  I have a photo library on an external hard drive. I've slowly been import previews of the photos selected from the library in my catalog, adding them during the import process - well. But now, I hit a problem. Another folder in my library contains several subfolders, each containing a number of photos (a mixture of RAW steals (naves) and jpg). I was importing found in my catalog each Subfile in turn, using the Add function, usually of the jpgs only from each Subfile. It works fine, until I reached a particular Subfile. For some reason when I try to import from it and select the secondary file as a Source, only the RAW (NEF) images appear in the preview pane (sorry, forgot the correct term for it!). I know that jpg files are in this auxiliary file on the external hard drive, because when I view its content in Windows, they are all there. But try as I can (choose the file under source, select the folder parent as a source, try to copy or move them, instead of adding them), nothing seems to work. Since they do not appear in the preview pane, I can't import them. It does appear that this a Subfile where the problem exists, but I don't see anything that is different from the others (names of files under all use the same structure - yyyy-mm-dd_custom name, and pictures in all subfolders are adopting the same denomination structure too - yyyy-mm-dd_sequential number_custom name.) NAVE/JPG. So what I am doing wrong? Any ideas please.

  It is possible that the images in this particular subfolder were taken in your camera in RAW + JPEG.  If so, you will need to go to preferences under the general tab and make sure the box "processing JPEG files files next to raw as separate photos" is checked.

  

  However, assuming that this is the case, there is really no reason to import the JPEG file if you already have the RAW file.

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.

• How to print a list of the names of the video in the library in an external hard drive?

  Original title: I have an Acer laptop and an external hard drive with stored videos. How to print a list of the names of the video in the library?

  The one you suggest how to print a list of the video library on an external hard drive please?

  Hi lekitschmoderne,

  1. what type of video list you have? It is a type of list of movies?

  You can try to connect the external drive to the computer and access the list of video. Right-click on it and select print.

  For more information, you can consult the following article:

  Print a document or file

  Hope this information is useful.

• Restoring data of Vista (from backup/restore) does not recognize my external hard drive, when I request a restore from a backup of data

  It does not recognize the HD during backups. The backup files are visible in date of..., and I believe they exist. HD is a new Maxtor external

  Hello

  ·          Windows recognizes the external hard drive?

  ·          How you back up files?

  ·          You get the error message?

  ·          It is visible in Explorer? Disk management how about you?

  You can put your system to boot and try to run the backup. This disables antivirus software and other third parties to eliminate conflicts.

  See the article below on how to place your system in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• move el capitan photo library app on external hard drive

  Question:

  How to move to El Capitan new library of the 'Photo' app on an external drive?

  The picture of El Capitan App behaves like a virus - it takes my computer whenever I plug a phone, etc.

  There seems to be no preference to choose which application opens to plug in a device, and iPhoto failed to do not open.

  (And selecting the cloud for storage is similar to trust someone else to keep forever, hundreds of concerts my confidential and important data.) "If they were to lose my credit card information, that would be correct.)

  I will not "auto-save" my photos on my drive internally, and will not allow 'Photo' me to select one different folder other than the one they chose for me on my internal drive. Whenever I select a folder from the external hard drive in the preferences, it is default to the original destination in the internal drive.

  Most discussions on the application of 'Photo' of Apple are extremely difficult to find because the results of a search of the generic name of there new beacon 'Photo' app display the results of all things by the word 'photo' in them. Go to Apple support with the name of their application as the search keyword: "photo".

  It seems that the fellows who designed Windows 8 have been able to find a job at Apple. I think it may be easier to move a photo library of Windows 8 at the library 'Photos' El Capitan that moving the iPhotos library.

  I don't remember thinking iPhoto needed to be redesigned. Simply not take 20 minutes for the Interior to appear cryptic images. And maybe be able to import large files of k 4, without crashing on every attempt.

  PLEASE SEE THE APP "FUNBOX" BEFORE THE NEXT UPDATE OF 'PHOTO '!

  in this soft - 128 GB iPhone photos appear in less than a minute, and you have the ability to save large images videos 4 k, voice memos, etc. simply by dragging them to the location desired. The good old MAC intuitive way that attracted us to Apple in the first place.

  Perhaps Apple simply tries to leave the free App company.

  RULE NO. 1:

  Applications need to be improved - not made obsolete!

  One Solution: rename the new 'photo' application in iPhoto. (I'm a genius!)

  How to move to El Capitan new library of the 'Photo' app on an external drive?

  Select it in the image folder and drag the EHD.  Once there open to confirm a successful move and then remove the pictures folder.

  There seems to be no preference to choose which application opens to plug in a device, and iPhoto failed to do not open.

  With the trendy iPhone go to Photos and uncheck this box:

  

  Do this for each device you have.  If you have memory cards and reformat them, you will have to repeat every time.

  To kill the opening of Photos for all devices use the method posted by JadedEye:

  JadedEye

  22 December 2015 09:01

  Re: Prevent DEFINITELY pictures of automatic opening

  in response to leonie

  OK, it worked for me on El Cap

  Open a terminal window

  Type the following in the terminal and press enter

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  (followed by the return key or enter - ed)

  The exit of the terminal.

  Photos will run if you run, but it will not autolaunch on each connection to a camera or the card or reformatted the card.

  If you want to return Photos auto-launch almost everything, use the same command change YES no

  This correction has set my workflow back to normal without Photos lance all the time.

  I will not "auto-save" my photos on my drive internally, and will not allow 'Photo' me to select one different folder other than the one they chose for me on my internal drive. Whenever I select a folder from the external hard drive in the preferences, it is defaulted to the original destination in the internal drive

  I don't know what you mean by that last statement.  Are you referring to export photos from your library to the EHD? Or are you referring to place your library on the EHD and its use here? The export window to select any location you want to save to.  By default, it opens to the desktop on the startup disk. But you can select any volume which is mounted by clicking it in the sidebar of the export window:

  

  Since we are all users like you here, you can keep the rants for you or send to Apple via https://www.apple.com/feedback/photos.html.

  

• External hard drive has problem by being recognized from my Win7 desktop PC. How can I fix?

  Hi This is the first time I post something, but I always read your thread, which helped me a lot!

  Now I'm having a problem and I can not find answers: C

  I use a desktop PC

  • Windows 7 Home Premium
  • Service Pack 1
  • 5.1 index of Windows performance
  • Processor: Intel Core i5-2300 @ 2.80 GHz 2.80 GHz CPU
  • 8.00 GB OF RAM
  • System: 64-bit

  And I'm having a problem with an external hard drive, Toshiba Stor.E Canvio 3 TB USB3

  Specifics:

  • Brand: Toshiba
  • Model: HDWC130EK3J1
  • Capacity of 3 TB
  • External interface: USB 3.0 (compatible USB 2.0)
  • Power:
    • Power AC adapter cable.
    • Input: 100-240V, 650mA
    • Output: 12V - 2A
    • Head of exchangable taken EU/UK
  • Compatibility: PC & Mac
  • System: NTFS (MS Windows) * the disk can be formatted the system filesystem HFS + for Mac compatibility.
  • Requires:
    • Windows® XP / VISTA® / Windows® 7
    • With 750 MHz or faster CPU
    • 10 MB of disk space system hard
    • 256 MB of system memory
    • a USB 3.0 or USB 2.0 port

  HERE, WHAT IS HAPPENING TO ME:

  I turn off the pc and I keep the hard drive is connected.

  I start windows. No problems so far.

  I open windows Documents, I want access to my hard drive, and first of all, she has another name, not the one I gave to her when I formatted, it (like two weeks there are other problems, but that's another story) and when I click on it an error message appears saying that my local drive has been damaged and cannot be opened and is necessary for formatting.

  I tried to unplug it after the shutdown of the PC (when the PC is on I can't unplug it because that always seem to be used, even if everything is closed) because I thought that during the start-up in somewhere so it might be confused with a drive of the computer, for three days, he stopped to do today after I plugged it again.

  I unplugged and plugged a different device, you see correctly, so I unplugged and re-connected to my PC, now we see normally.

  I'm ok with this, but I am aware that it is not normal behavior, what should I do?

  Thank you

  Since the watch test failed, the hard drive must be replaced. If it is under warranty, you can take it to the Toshiba service center to get it replaced. Another thing, the new hard drive is the recommended option.

  Before in both cases, make sure that you back up all of your important and personal data from the hard drive.

• LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How do return on LR the possibility to repeat already published photos complete with the p

  LR 5.7 cannot find my files already edited because I accidentally deleted them. I have original and exported raw files edited JPEG images on an external hard drive. How to get back on LR the possibility to repeat already published photos complete with a history of editing? Thank you.

  Thank you Joe Maniac.  I deleted the original linked files on my internal hard drive which were dng files, but had copies of the raw files edited and edited the exported raw files (in JPEG format).  I don't have copies of dng files.  So what I ended up having to do was import the original raw files which then made a DNG copy on my internal hard drive.  The link has not changed, but now the files were back in the original track for missing photo alerts disappeared and I was able to see my change history.  The process has been painful, but without the dng, I had nothing to do a link to more if at least re-import them files has recreated the dng.  I don't know if there was an easier way, but it seemed that the problem did not the link deletion.  I use LR for a few years, but it was a rookie mistake, precipitated by my hard drive being so jammed up I ended up delete what I shouldn't.  I should have just moved the dng and the link to an external hard drive. Thanks again.

• Library exported to external hard drive, error in the attempt to link to files on hard drive

  Hello

  I recently started using lightroom and stored the files on the local drive of my macbook pro (current operating system) up to that I ran out of space. Export the catalog a HD external, then deleted the files from the local disk. As I tried to import the .lrcat file for export to the external hard drive and received this error message:

  "Cannot import this catalog at this time. The catalog is in use by another copy of Lightroom or has been closed properly. If it was badly closed, please consider getting a health check at the opening. »

  I'm not in LR on other computers, so I'm thinking that Lightroom was "closed badly. However I can not know what to do, and technical support will not help me without the serial number which I can't because I'm travelling. Any advice would be sincerely appreciated.

  Jordan

  If you indeed export the catalog on the external hard drive, you don't need to import it. Just double-click on the copy of the catalog that is located on your external drive.

  Furthermore, your serial number is available in the menu help/information system.

  HAL

• I'm low in disk space on C: drive I can use my external hard drive of 500 GB to fill in the space

  Toshiba L40 series

  Toshiba L40 series

  That's what I do with my external hard drive.
  I propose all programs installed , personal files and folders on my external hard drive. Thus, only the programs in the system are in the C drive.

  My C drive has 581 GB, so far only 50 of them are used. (Mine is a Win 7 64-bit).

• What is an I / Q error? This occurs with the backups using external hard drive SeaGate

  We have two external hard drives; a 3Terabyte (don't know how it) Seagate and another whose name escapes me. On the Seagate, I get the message: backup did not complete due to I / Q error. What is I / Q error and how to fix this? If all goes well, not a complicated process.

  Thanks for any help. Hope I selected the areas to fix this, below.

  Fred, SR.

  Win7 64 bit, Office 2010

  Hello

  I assumed that by I / Q error you mean error e/s? Run chkdsk on the drive Seagate:

  Start > Search bar > type cmd right click and select run as administrator

  High CMD should now be open, type the following:

  CHKDSK x: /r

  x involves the reader of your letter, so if your hard drive in question is the letter c, it would be:

  CHKDSK c: /r

  Restart the system and allow to run chkdsk.

  Kind regards

  Patrick

• I bought an external hard drive, but my mac won't let me transfer all files that it

  My mac won't let me transfer all files on an external hard drive.

  Why not?  What is the error you get when needed?

  How the drive is formatted?

  If it is formatted for Windows, OSx impossible natively to write about it.

• Can I get the Win 7 on a hard drive with multiple partitions without erasing all the data on the disk

  I have a HP p6310f with a 1 TB hard drive partitioned into two partitions.  One I have a Win 7 OS, which becomes more and more corrupt.  I would get a new version on the other partition and keep the old version until I don't know that I have restored all the programs and data properly, just in case I need something and are struggling to rebuild.  Is this possible?  When I tried to install the recovery disks, they said that the entire disk, not just the score, would be erased.  This seems a bit silly, but I am very worried about losing key information and programs that I am not able to restore.

  Hello

  If you use HP recovery disks to reinstall the operating system, you are right that they reformatted the whole HARD drive before installing the operating system.  As far as I know, has no way around that.  The only thing I can suggest is to make sure that you are able to get the installers of any program that you need before you restore the PC and maybe do two backup copies of all your personal data, just to be sure.

  On the link below, just select your operating system (Windows 7 32 bit or 64 bit) and verify that you are able to download the drivers and software you need before you reinstall it.  You can always save installers for a writable DVD etc. now and then just to run it from the disk when you want to reinstall.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us β = en & product = 4107914 & 〉

  I hope this helps.

  Best wishes

  DP - K

• External hard drive (Seagate) not readable after the ejection using Thunderbolt cable

  Not sure where this question fits as this seems to be a Thunderbolt cable problem but here goes...

  I have 4 TB Seagate Backup Plus external drives for archiving with two drives - backup A and B backup - and two interfaces, a basis of love at first sight and a standard basis of USB3.

  Using the basis of love at first sight that I backed up to 1.5 TB of data on a Mac logged to A disk and ejected from backup format. When I reassembled A backup to verify the data Finder says the drive is not a recognizable car and I had to reformat. I thought that I must have crashed head or something like the disc was still running when I pulled it off the base of love at first sight. When I got tired to reformat the drive in disk utility only 500 GB of the 4TB were available for formatting, so I thought that I've certainly got to have damaged it.

  Then I saved my 1.5 TB of data to a second drive Seagate Backup Plus (backup B) but when I eject this drive (this time I waited to stop and pulled the power over the base before you remove the disk) and then lift the drive that the same error came in the Finder. Suspecting it was the Thunderbolt interface I swapped backup to the base of the USB3 B and all the data is there! I checked A backup and even if she had to be reformatted this time all the 4 TB of capacity was available.

  I also have a Rugged Lacie 2 TB drive with a Firewire interface and it seems to work just fine so maybe the Thunderbolt Apple cable or Seagate sight base. I don't have a second Thunderbolt cable to test with at the moment.

  As a secondary issue readers are not run down after eject either. The heads are parked, but readers continue so I have to pull the power and wait that it happen down before I can remove basic USB3 disks or love at first sight. This problem, even if it's embarrassing, I can live with. In the foreseeable future I'll use the basis of the USB3.

  Everyone knows about this problem before? It sounds really weird.

  I can only give you my opinion of WD boxes and I'm afraid that's not good. My experience with WD boxes have always been bad. My suggestion is to try another TB cable and see if that's it, if not then try to connect another device to your iMac Thunderbolt and test to see if it is the iMac, which I doubt it is. If this isn't the cable or the iMac, then you know that it's the condom. If the disks are recoverable from the speaker, remove them and get a TB of high-quality speaker. My vote goes to OWC (www.macworld.com) pregnant Thunderbolt.

• I am trying to create an image of my computer on an external hard drive, but I get an error message: 0 x 8007003 path is missing

  I used to assess the problem, but it is Mr. fix: component of windows update is missing and he fixed it.  Still, I can't back up the C: drive.

  Hi Angela,.

  What operating system you have installed in the computer?

  This problem occurs if you save a library that contains custom folders that are located under your user profile. Please refer to the article to resolve the problem. The instructions apply to Windows Vista or Windows 7.

  Method 1:

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455

  Method 2: Temporarily disable the security software and firewall settings and check if the Internet connection drops.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  For reference:
   
  Considerations when creating a system image

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

  Post back if the problem persists, we will be happy to help you.