My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

Similar Questions

• I keep getting error messages when you try to synchronize the files from the pc to a device

  He starts the synchronization process and finished very quickly not to synchronize files and said 'error' next to each file in the synchronization status, but no other explanation

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1 are. what device you referring?

  2. What is the brand and model of the unit?

  3. What is the exact error message do you get?

  4. have there been recent changes to the computer before the show?

  5. do the issue confined to a particular file?

  6. what application you use to synchronize the device?

  Please go ahead and consult the methods mentioned below and later a update on the State of the question.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows7/Set-up-a-device-to-sync-in-Windows-Media-Player

  Synchronize music, photos, contacts, and calendars with a mobile device: http://windows.microsoft.com/en-US/windows7/Sync-music-pictures-contacts-and-calendars-with-a-mobile-device

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions

  Please follow these recommended steps and post if you still experience the problem.

• I can't send / receive text Messages on my phone my husband track 6s iphone

  I can't send / receive text Messages on my phone my husband track 6s iphone.

  Contact your operator. SMS and MMS messaging are characteristic of the carrier.

• Receive error message when you try to download the update update for PowerPoint 2003 (KB957784) security

  I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).

  I searched night and day for a solution - even contacted microsoft by e-mail.  The specific error is: Code 57F

  It is displayed when I press the "get help with this error message:
  "WindowsUpdate_0000057E" "WindowsUpdate_dt000"

  It was the E-mail feedback:

  Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.

  I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.

  MowGreen-
  Understood the factor of masking - has considered it.  Still, I send my appreciation in this matter.  I would like to know if you think I should download the SP2 for Vista.

  Peace-
  Matt

  Service Pack 2 offered by Windows (automatic) update yet?

  Windows Vista and Windows Server 2008 service Pack is not available for installation from Windows Update and automatic updates does not offer

  Cause
  This problem can occur for different reasons. However, the following reasons are the most common:

  • Already, you have the service pack installed and do not realize it.
  • You must install another update before you install the service pack.
  • You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
  • Components of the system that you must have to install the service pack are not installed on your computer.
  • You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
  • You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack

  Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:

  955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009

  See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
  The MS KB article below has sound advice for steps, you have to take before installing a Service Pack

  What you need to know before you install Service Pack 1

  Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation

  Start here - free support for Windows Vista service pack problems

  If a problem occurs, you can also solve problems installing yourself-
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  MowGreen MVP Data Center Management - update of safety Consumer Services

• How to prevent (text) messages to display on my tv using my iPhone to the apple tv airplay?

  How to prevent (text) messages to display on my tv using my iPhone to the apple tv airplay?

  If you use, you can not, since that's what mirroring is mirroring, it reflects your screen. If the content you watch support it try to turn the mirror off the coast and just use airplay to base.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Receive the error message when you try to activate the solution Center

  I get an error message when I try to activate the Solution Center.  'Error in the file c:\Program Imaging\bin\hpqscloc\1033.xml HP analysis'

  I tried to remove and reinstall the entire software suite several times, but did not uninstall the Solution Center file.

  OfficeJet J6450.  Windows 7, 32 bit.

  Hey R29,.

  Start by downloading the full package of driver from here: HP Officejet full feature and driver software

  If you have recently downloaded this driver package, you may be able to skip this step. If you have problems with the steps below and impossible to find a directory, you must re-download the driver pack and launch the exe.

  1. disconnect the USB from the computer printer.

  2. now, go to start > run > and type folder

  3. search for any record label hp_web_release or 7z

  4 inside of this folder, navigate to the 'util' directory > directory 'ccc '.

  5. in there, run Uninstaller_L1 through L4 in order.

  6. check Add/Remove programs in the control panel for additional HP programs that have not been deleted and delete.

  7 remove the HP or Hewlett-Packard directory in Program Files.

  8 Goto Program Files > common files and remove the HP or Hewlett-Packard directory there as well.

  9. Select start > run and type "temp". inside this folder, delete all the files.

  10. Select start > run and type "%temp%". inside this folder, delete all the files.

  11. now restart and reinstall the driver using the driver from the web.

  Let me know if that solves the problem.

  Thank you!

  Sean

• FRX Drilldown Viewer Error Message When you try to change the destination printer

  Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output

  in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().

  I hope that some useful information about the system:

  They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).

  The OS is a 64-bit version with 8 GB of RAM installed.

  Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe

  could someone point me in the right direction, it?

  Thank you very much!
  Anthony

  Hello
   
  Thanks for posting the question.
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

   

  I hope this helps.

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• I get an error message when I want to print from my laptop on my Lexmart printer wireless. It is said "problems connecting to the printer.

  original title: devmgmt msc

  I get an error message when I want to print from my laptop on my Lexmart printer wireless. It says "connection to the printer problems" sometimes he just complained and then prints, sometimes it won't print at all. I hate the thing!

  Hello

  I suggest you to see link below and check if it helps.

  http://www.Lexmark.fr/publications/pdfs/810/winug/Eng/UGnetwk.html

  I suggest also you see the steps from the article below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Error message when you try to play the DVD

  I get the following error message when you try to play the DVD:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  My OS is Windows seven, and I don't see any video updates on the HP Support site. Help!

  Downloaded the codec?

• I get this error message when I try to install "the resources required are missing" what is this all?

  I get this error message when I try to install "the resources required are missing" what is this all?

  I've had photoshop for years, it has stopped working last week - I think he suggested I have try to reinstall so I uninstalled and when I try to reinstall is give me this error message!

  "Required resources" that is that all?

  The product is not tested on the operating system you are using, so it may or may not work on it.

  I suggest you to upgrade to creative cloud and use the latest Adobe Photoshop CC 2015. See, Lightroom and Photoshop | Plan of creative photography of cloud of Adobe

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani